• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.1-484.1
• /
• 2014

Bulk hetero junction (BHJ) polymer solar cells (PSCs) are one of the most promising fields as alternative energy source. Especially, the development of new p-type conjugated polymer is one of the main issues to get core technology. In this study, a series of varied ratio of 3,6-carbazole in poly[9-(heptadecan-9-yl)-9H-carbazole-2,7-diyl-alt-(5,6-bis-(octyloxy)-4,7-di(thiophen-2-yl)benzo-[1,2,5]-thia-diazole)-5,5-diyl] were designed and synthesized. These polymers have good solubility and film formability than PCDTBT which is well known promising material. Investigation of the photovoltaic properties of these new polymers indicated that polymer with 2% of 3,6-carbazole provided higher PCE (3.8% to 4.9%) with enhanced JSC, FF, VOC. We found origin of this improvement using several methods, one of which is reduced bimolecular recombination in polymer.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.88-93
• /
• 2008

지역규칙성 폴리3핵실티오펜과 용해성 플러렌 블렌드로 이루어진 벌크이종접합 고분자 태양전지를 제작하였다. 고분자 블렌드 필름에 대한 열처리 효과가 필름의 결정 구조와 자외선/가시광선 흡수스펙트럼에 주는 영향을 조사하였다. 그 후, 열처리에 의한 필름의 결정구조와 태양전지 효율의 상관관계를 연구하였다. 그 결과, $150^{\circ}C$에서 열처리한 필름이 분자간 상호작용 및 결정성측면에서 최적이었으며, 이 때, 고분자 태양전지의 에너지 전환 효율은 3.2 %이었다.

• Current Photovoltaic Research
• /
• 제4권2호
• /
• pp.48-53
• /
• 2016

We report the effect of physical load on the stability of organic solar cells under physical loads. The active layers in organic solar cells were fabricated with bulk heterojunction films (BHJ) films of poly (3-hexylthiophene) and phenyl-$C_{61}$-butyric methyl ester. The loading time was varied up to 60 s by keeping the physical load constant. Results showed that the open circuit voltage was not influenced by the physical load but other solar cell parameters were sensitive to the loading time. The fill factor was very slightly increased at 15 s, while short circuit current density was well kept for 30 s. The power conversion efficiency was reasonably maintained for 45 s but became significantly decreased by the continuous loading for 60 s.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.242-242
• /
• 2007

• 한국고분자학회지:고분자과학과기술
• /
• 제21권4호
• /
• pp.314-320
• /
• 2010

• 한국고분자학회지:고분자과학과기술
• /
• 제22권6호
• /
• pp.539-544
• /
• 2011

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.444-444
• /
• 2008

For the polymer tandem cell, simple and advantaged solution-based method to electron transport intermediate layer is presented which are composed $TiO_2$ nanoparticles. Device were based on a regioregular Poly(3-hexylthiophene)(P3HT) and [6,6]-phenyl $C_{61}$ butyric acid methyl ester($PC_{60}BM$) blend as a donor and acceptor bulk-heterojunction. For the middle electrode interlayer, the $TiO_2$ nanoparticles were well dispersed in ethanol solution and formed thin layer on the P3HT:PCBM charge separation layer by spin coating. The layer serves as the electron transport layer and divides the polymer tandem solar cell. The open-circuit voltage (Voc) for the polymer tandem solar cells was closed to the sum of those of individual cells.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.484.2-484.2
• /
• 2014

There are many efforts to improving the power conversion efficiencies (PCEs) of dye-sensitized solar cells (DSCs). Although DSCs have a low production cost, their low PCE and low thermal stability have limited commercial applications. This study describes the preparation of a novel multifunctional polymer gel electrolyte in which a cross-linking polymerization reaction is used to encapsulate $TiO_2$ nanoparticles toward improving the power conversion efficiency and long-term stability of a quasi-solid state DSC. A series of liquid junction dye-sensitized solar cells (DSCs) was fabricated based on polymer membrane encapsulated dye-sensitized $TiO_2$ nanoparticles, prepared using a surface-induced cross-linking polymerization reaction, to investigate the dependence of the solar cell performance on the encapsulating membrane layer thickness. The ion conductivity decreased as the membrane thickness increased; however, the long term-stability of the devices improved with increasing membrane thickness. Nanoparticles encapsulated in a thick membrane (ca. 37 nm), obtained using a 90 min polymerization time, exhibited excellent pore filling among $TiO_2$ particles. This nanoparticle layer was used to fabricate a thin-layered, quasi-solid state DSC. The thick membrane prevented short-circuit paths from forming between the counter and the $TiO_2$ electrode, thereby reducing the minimum necessary electrode separation distance. The quasi-solid state DSC yielded a high power conversion efficiency (7.6/8.1%) and excellent stability during heating at $65^{\circ}C$ over 30 days. These performance characteristics were superior to those obtained from a conventional DSC (7.5/3.5%) prepared using a $TiO_2$ active layer with the same thickness. The reduced electrode separation distance shortened the charge transport pathways, which compensated for the reduced ion conductivity in the polymer gel electrolyte. Excellent pore filling on the $TiO_2$ particles minimized the exposure of the dye to the liquid and reduced dye detachment.

• 전기화학회지
• /
• 제13권1호
• /
• pp.1-9
• /
• 2010

본 논문에서는 주요 차세대 태양전지로 분류되는 염료감응 태양전지와 유기(고분자)태양전지에 대한 연구 동향을 살펴보고 이들의 하이브리드 기술전망에 관해 살펴보았다. 특히 두 분야는 기존 무기물 소재의 태양전지와의 경쟁력을 제고하기 위한 측면에서도 상호 전략적인 기술융합을 통한 하이브리드 기술의 개발이 필요한 시점이다. 기술적으로나 시기적으로 아직 초기단계임에도 기술융합에 대한 새로운 응용 가능성에 많은 관심을 끌고 있을 뿐 아니라 성공적인 융합기술 개발의 파급효과도 매우 클 것으로 예상된다.

• 폴리머
• /
• 제37권6호
• /
• pp.694-701
• /
• 2013

프탈이미드 유도체와 티오펜 단량체들을 이용하여 새로운 고분자인 poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-dithiophen-2-yl-isoindole-1,3-dione))-alt-(2,5-thiophene))(T-TI24T)를 Stille법을 이용하여 합성하였다. T-TI24T의 수평균 분자량은 86500 g/mol로 매우 높으며 클로로포름, 1,2-디클로로벤젠, 톨루엔과 같은 용매에 매우 잘 용해된다. 또한 $380^{\circ}C$까지 매우 우수한 열적 안정성을 갖고 있다. T-TI24T는 꽤 낮은 호모에너지 준위(-5.33 eV)를 갖고 있다. 서로 다른 T-TI24T와 (6)-1-(3-(methoxycarbonyl)-{5}-1-phenyl[5,6]-fullerene(PCBM)의 무게비를 갖는 블렌드를 광활성층으로 하는 태양전지를 제작하여 특성을 살펴본 결과 고분자와 PCBM의 비율이 1:3일 때 가장 최적화된 결과를 보였으며, 이 때 광전변환 효율과 개방전압은 각각 0.199%와 0.99였다. T-TI24T 기반 태양전지들은 비록 매우 작은 광전변환 효율을 갖지만 잘 알려진 P3HT:PC61BM으로 구성된 태양전지와 비교해 큰 매우 큰 개방전압을 갖는다(약 0.5 V).