• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.89-97
• /
• 1999

The purpose of this research is to investigate the utilization of recycled fine aggregates as a material to apply to a building finished walls or as a decorating material in combination with a polymer. The strengths of two resin mortars using recycled fine aggregates and natural fine aggregates was made. In order to improve the workability and the strength of the resin mortar with recycled fine aggregates, partial replacement of recycled fine aggregates with natural ones was made with the application of various type of fillers. The results, it show that the compressive strength and flexural strength of resin mortar using the recycled fine aggregates were about 70% to 100% of those of resin mortar using natural fine aggregates. It was enough to assure the utilization of the recycled fine aggregates as a material for the production of resin mortar. From the result of partial replacement of recycled fine aggregates with natural ones, the compressive strength was Increased from 5% to 15% and the flexural strength was much as 5% to 20% as a result of 70% substitution It was also found that the use of garnet powder shows a similar tendency in the compressive strength and slag powder does in the flexural strength and tensile strength.

• 한국지반환경공학회 논문집
• /
• 제15권8호
• /
• pp.31-37
• /
• 2014

본 연구에서는 초속경 폴리머 모르타르의 역학적 특성이 평가되었다. 이를 위해 총 75개의 모르타르 시편에 대한 압축강도, 휨강도, 부착강도, 동결융해, 길이변화, 그리고 흡수율 시험이 실시되었다. 실험결과로부터 초속경 폴리머 모르타르의 부착강도는 일반 콘크리트보다 50 % 정도 우수하였으며, 동결융해에 대한 저항성은 보통콘크리트보다 뛰어났다. 또한 초속경 폴리머 모르타르의 길이변화와 흡수율은 20 % 정도 일반콘크리트보다 작았다. 그 결과 초속경 폴리머 모르타르는 콘크리트 구조물의 균열을 보수하는데 효과적으로 활용될 수 있을 것으로 평가되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.252-255
• /
• 2003

Recently, there is a growing trend in the United States toward replacing latex additives in polymer-modified cement mortars with redispersible polymer powders. This movement is relatively new in the U.S. but is further advanced in Europe due to the more extensive use of cement and concrete in residential construction. Hitherto, in Korea - there is a very diminutive movement towards this growing trend. Thus, there is limited availability of data on redispersible polymer powders. This study investigates the effectiveness of redispersible polymer powder on improvement of the mechanical properties of modified mortar. It was concluded from the results of the experiments that the size of the dispersed polymer particles, variations in glass transition points (Tg), and variations in minimum film formation temperature (MFT) influenced the strength development of the modified mortars, and optimum strength in modified mortars using redispersible powders can be achieved when the Tg which accounts for the degree of powder flexibility is considered.

• 한국농공학회논문집
• /
• 제47권6호
• /
• pp.27-34
• /
• 2005

The purpose of this study is to improve the durability performance of polymer modified cement composites for repair of concrete under combined aging conditions. The experimental procedure was divided into three parts. First, the replacement level of mineral admixtures in polymer modified cement composites were determined in an experimental study based on a Box Behnken design. Second, the flow value, compressive strength and chloride permeability test of sixteen types of mixtures were conducted. Test results show that the polymer modified cement composites were effected on the improvement of the compressive strength and permeability performance. Third, the effects on the replacement level of silica fume mixture was evaluated by the compressive strength, chloride permeability, chemical resistance and repeated freezing and thawing cycles test. They demonstrated that the polymer modified cement composites using mixture of silica fume, fly ash, and blast furnace slag improved the durability performance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제1권1호
• /
• pp.107-112
• /
• 1997

A series of reinforced concrete beams was tested to evaluate the flexural performance of the repaired RC beams. The key parameters for this study were the size and location of the patch, and the repair materials, including polymer, polymer-cementitious and cementitious materials. The repaired specimens failed by a typical flexural mode with minor interfacial bond failure. Beams repaired with polymer, polymer-cementitious and cementitious materials recover 100%, 91%, and 97% of the flexural strength respectively, while beams with cement mortar lose approximately 30% of the strength. Compared with the pressure injection techniques the specimens repaired with patching techniques show low flexural strength, with significant interfacial bond failure. Location and size of the repaired part do not affect the recovering performance. Interfacial behavior between repair and strengthening materials is the major influencing factor for the composite structures.

• 한국건축시공학회지
• /
• 제19권6호
• /
• pp.485-494
• /
• 2019

본 연구는 고로슬래그 미분말 및 플라이애쉬를 혼입한 SAE 에멀젼 기반 폴리머 시멘트 모르타르의 휨과 인장특성에 대하여 실험하여 혼화재의 혼입효과를 평가하고자 하였다. PCM은 폴리머 시멘트비와 혼화재의 혼입율을 변화시켜 시험편을 제작하였으며, 휨강도, 휨접착강도, 인장강도 및 인장접착강도 시험을 실시하였다. 연구결과, 혼화재의 혼입에 따른 휨강도 및 휨접착강도 개선은 거의 발현되지 않았으나, 인장강도 및 인장접착강도에서는 혼화재의 혼입에 따른 강도개선 효과를 얻을 수 있었다. 특히 PCM의 인장 접착강도는 P/C 20%, 고로슬래그 미분말 혼입율 10%에서 최대 3.35MPa로 보통시멘트 모르타르의 약 2.36배, 혼화재를 혼입하지 않은 PCM의 약 1.32배의 높은 강도를 나타냈으며 인장접착강도/인장강도비는 평균 48.7%를 나타냈다. 본 연구를 통하여 PCM의 인장 및 인장접착강도 개선을 위해서는 혼화재 혼입율 5% 또는 10%를 제안할 수 있었다.

• 콘크리트학회논문집
• /
• 제13권1호
• /
• pp.30-37
• /
• 2001

본 연구에서는 열경화성인 UP 수지에 열가소성 스티렌 수지를 혼합하여 사용함으로써 UP 수지의 경화기구 중 스티렌 수지가 수축보완 효과를 일으켜 UP 모르타르의 경화수축을 저감시킬 수 있다는 가능성을 확인하고자 실시하였으며 그에 따른 역학적 성질의 변화를 함께 검토하였다. 본 연구결과, 폐 스티로폴 용해액을 첨가한 불포화 폴리에스테르 수지의 점도는 EPS/PS비가 30% 미만일 경우는 PS/UP비가 증가함에 따라 감소하여 시공성 면에서 EPS/PS비가 30%이내에서 적절하였다. 또한 휨 및 압축강도는 EPS/PS비보다는 PS/UP비에 따른 영향이 크게 나타났으며 PS/UP비 30%이하에서 감소 정도가 작았으며, EPS/PS비와 PS/UP비가 증가함에 따라서 경화수축은 전체적으로 감소되는 경향을 보였다. 적절한 시공성과 휨 및 압축강도 특성 그리고 경화수축 시험의 종합적인 결과, EPS/PS비 30%, PS/UP비 30%일 때 최적의 배합 조건으로 나타났다. 이로서 폐 스티로폴을 UP 모르타르이 수축저감제로서 사용함에 있어 역학적 성질의 큰 변화 없이 경화수축을 제어할 수 있다는 결과를 얻어 실제현장에서의 사용성이 기대되며, 또한 본 연구에서 사용한 스티렌 수지는 폐 발포 폴리스티렌을 스티렌 모노머에 액화시킨 것으로서 폐기물로 발생되는 폐 스티로폴의 자원재활용의 측면에도 그 의미가 있다고 할 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.33-37
• /
• 2004

Recently, Growing tendency for structure surface to use water repellent agent has increased steadily. But investigation of it's protection and durability property is not sufficient. Therefore, this paper shows the investigation about repellent property and micro structure's change in surface layer of mortar that is applied by water repellent agent. Water repellent property, absorption coefficient, air permeability, porosity and observation of micro construct was investigated according to water repellent agent type. The test results indicated that mortar applied water repellent agent appears tiny absorption coefficient, but air permeability is maintained. The reason is because silane solution is coating at capillary surface of a wall and minute pore structure is changeless.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.379-382
• /
• 2003

In this study, methyl methacrylate (MMA)- modified unsaturated polyester mortar, in which the MMA was added to the unsaturated polyester resin, was developed for improving the early-age strength and the workability of the conventional polymer concrete, binder of which was the unsaturated polyester resin. Then the strength properties of the MMA-modified unsaturated polyester mortar were surveyed. The experimental results showed that early-age strength was greater when the MMA contents were increased in the range of $20{\sim}40%$, but the strength rather showed a tendency of decrease when the MMA contents was 50%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.257-258
• /
• 2022

In this study, as a part of the study to alleviate the durability degradation due to low tensile performance and cracking of concrete, two kinds of catechol functional chitosan (Cat-Chit) were replaced at a ratio of 5, 10, 15, 20% as a mixed water substitute to evaluate the fluidility and strength characteristics of mortar.