• Macromolecular Research
• /
• v.8 no.3
• /
• pp.120-124
• /
• 2000

Clay-dispersed nanocomposites have been prepared by simple melt-mixing of two components, styrenic polymers with different content of functional groups and two different organophilic clays (Cloisite(R) 25A and Cloisite(R)30A) with a twin screw extruder. Dispersibility of 10-$\AA$-thick silicate layers of clay in the hybrid was investigated by using an X-ray diffraction method and a transmission electron microscope. It was found that if the interaction force between intercalant and matrix polymer is attractive, the matrix polymer intercalates more rapidly into the gallery of silicate layers. The faster intercalation of matrix polymer leads to the better dispersibility of silicate layers in the matrix polymer.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1901-1903
• /
• 2014

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.75-76
• /
• 1996

다공성 고분자 분리막을 제조하는 방법으로 기존의 용매교환법을 대신하여 내용매성, 내약품성 및 내열성이 매우 뛰어난 고분자를 소재로하여 다공성 고분자막을 만드는 열유도 상분리법(Thermally Induced Phase Separation, TIPS)이 개발되었다. TIPS공정에서는 주로 고분자/희석제 system의 열역학적인 불안정성에 의하여 polymer-rich phase와 polymer-lean phase로 상이 분리되는 liquid-liquid phase separation과 결정성 고분자의 결정화에 의한 solid-liquid phase separation을 주로 상분리 mechanism으로 사용하고 있다. 따라서 위에 언급된 TIPS 이론에 근거한 melt spinning 공정에 의하여 PP 중공사막을 제조하였는데 wet spinning 공정에 의한 용매 교환법에 비해 비교적 공정이 단순하고 다공도를 조건하기가 용이하며 구조 및 성능면에서도 높은 재현성을 가지고 있다. 또한 우수한 소재임에도 불구하고 절절한 용매의 부재로 용매교환법에서 사용할 수 없었던 폴리올레핀계, 나일론계, 방향족출합계 고분자를 사용할 수 있게 되어 소재의 폭이 넓어졌다는데에 가장 큰 장점이 있다. 본 연구에서는 PP중공사막을 제조하기 위하여 먼저 용융 방사장치를 제작하였고 melt spinning 공정에 의해 막을 제조하는데 적합한 방사조건들을 확립한 후 결정된 방사조건에 의해 얻어진 PP 중공사막의 구조 및 성능에 영향을 미치는 인자들에 관하여 조사하였다.

• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.289-297
• /
• 2009

We numerically analyzed flow characteristics of the polymer melt in the screw equipment using a proper modeling and investigated design parameters which have influence on the mixing performance as the capability of the screw equipment. We considered the non-Newtonian and non-isothermal flow in a single rotor equipment to investigate the mixing performance with respect to screw dimensions as shape parameter of the single rotor equipment and screw speed as process parameter. We used Bird-Carreau-Yasuda model as a viscous model of the polymer melt and the particle tracking method to investigate the mixing performance in the screw equipment and considered four mixing performance indexes: residence time distribution, deformation rate, total strain and particle standard deviation as a new mixing performance index. We compared these indexes to determine design parameters and object function. On basis of the analysis results, we carried out the optimal design by using the response surface method and design of experiments. In conclusion, the differences of results between the optimal value and numerical analysis are about 5.0%.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.940-944
• /
• 2003

With the increasing demand for plastic micro components, micro-/nano-molding using the mother stamper has received much attention. If the replication temperature is too high, the adhesion between the stamper and the polymer melt may deteriorate the surface quality of the replicated part, excessively wearing down the stamper. In this paper, an experimental method analyzes the temperature dependency of the anti-adhesion property between the actual stamper with patterns of sub-micrometer and the polymer melt. As a practical example, a correlation between the contact angle of the stamper and the surface quality of the molded substrates as a function of the replication temperature, respectively, was obtained quantitatively.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2010

ABS/MWNT nanocomposites were prepared by using MWNT wrapped with SAN through melt compounding. Effect of wrapping of MWNT by SAN on the morphology, mechanical and electrical properties of ABS/MWNT were analyzed. It was found that SAN could wrap MWNT effectively indicated by the increased thickness after wrapping, which is presumably due to helical structure of polyacrylonitrile component in a block copolymer of SAN. MWNT was observed to be dispersed more evenly in ABS matrix by SAN wrapping, which resulted in improved tensile properties of the composites. On the other hand, there was little effect on the impact strength and electrical properties of ABS having inherently high impact strength.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.47-52
• /
• 2008

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for the three kinds of thermoplastic vulcanizes(TPVs) and PP polymer in the mold with geometrically balanced runner system(Unary Branch Type Runner System). In this experiment, the effects of the melt temperature, injection pressure and injection speed on the filling imbalance were investigated. There was also the imbalance in TPV injection molding process as well as in conventional injection molding with plastics. The tendency of filling imbalance in TPV injection molding specially decreased by taking place the hesitation of TPV melt.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.79-85
• /
• 2006

Olefinic compatibilized blend(R-PP/R-PE)/layered silicate composites have been prepared by melt intercalation technique directed from $Na^{+}$ montmorillonite(MMT) or organophilic montmorillonites while using magnesium hydroxide as flame retardant. Morphology and flammability properties were characterized by X-ray diffraction(XRD), transmission electron microscopy(TEM), scanning electron microscopy(SEM), thermogravimetry analysis(TGA), limiting oxygen index(LOI), UL94 test. It is found that the compatibilized blend/layered silicate(Cloisite 20A) nanocomposites have a mixed immiscible-intercalated structure and there is better intercalation when a compatibilizer is combined with the polymer and layered silicate to be melt blended. A very large increase in the LOI value was observed with hybrid filler addition and further enhancement in thermal stability and compatibility of blend was obtained for the compatibilized blend containing small amount of layered silicate.

• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.5-10
• /
• 2008

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for the three kinds of thermoplastic vulcanizes(TPVs) and PP polymer in the mold with geometrically balanced runner system(Unary Branch Type Runner System). In this experiment, the effects of the melt temperature, injection pressure and injection speed on the filling imbalance were investigated. There was also the imbalance in TPV injection molding process as well as in conventional injection molding with plastics. The tendency of filling imbalance in TPV injection molding specially decreased by taking place the hesitation of TPV melt.

• Carbon letters
• /
• v.16 no.2
• /
• pp.86-92
• /
• 2015

Multi-walled carbon nanotube (MWCNT)/polycarbonate (PC) nanocomposite was prepared by direct melt mixing to investigate the effect of the shear rate on the surface resistivity of the nanocomposites. In this study, an experiment was carried out to observe the shear induced orientation of the MWCNT in the polymer matrix using a very simple melt flow indexer with various loads. The compression-molded, should be eliminated. MWCNT/PC nanocomposite sample exhibited lower percolation thresholds (at 0.8 vol%) and higher electrical conductivity values than those of samples extruded by capillary and injection molding. Shear induced orientation of MWCNT was observed via scanning electron microscopy, in the direction of flow in a PC matrix during the extrusion process. The surface resistivity rose with increasing shear rate, because of the breakdown of the network junctions between MWCNTs. For real applications such as injection molding and the extrusion process, the amount of the MWCNT in the composite should be carefully selected to adjust the electrical conductivity.