• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1711-1713
• /
• 2000

We fabricated an IMI-O polymer containing an imidazole group that could form a complex structure between the monolayer and the metal ions at the air-water interface. Also, the surface analysis and the electrical properties of metal ion complex of Langmuir-Blodgett (LB) films were investigated by using $\pi$-A isotherms. Atomoic force microscopy (AFM), current-voltage (I-V) measurements. In the $\pi$-A isotherms the molecular area was expanded with $Fe^{3+}$ concentration increase. It is considered that the expansion of molecular area is due to electrostatic repulsion between the polymer chains and hydrophobic increase of ionic strength. In the I-V characteristics, it is found that the limiting area has effects on the change of conductivity. And, the dielectric relaxation time decreased for increase of the $Fe^{3+}$ concentration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.11
• /
• pp.1192-1198
• /
• 2004

Hole transporting polymer(poly［N-(p-diphenylamine)phenylmethacrylamide］, PDPMA) was doped with nile red dye at various concentrations to study the influence of doping on the energy transfer during light emitting processes. Organic LEDs composed of ITO/blend(PDPMA -nile red)/ Alq$_3$/Al as well as thin films of blend(PDPMA -nile red)/ Alq$_3$ were manufactured for investigating photoluminescence, electroluminescence, and current-voltage characteristics. Atomic Force Microscopy was also used to observe surface morphology of the blend films. It was found that such doping. significantly influences the efficiency of the energy transfer from the Alq$_3$ layer to blended layer and the optical/electrical properties could be optimized by choosing the right concentration of the dye molecule. The results also showed a interesting correlation with the morphological aspect, i.e. the optimum luminescence at the concentration with the least surface roughness. When the concentration of nile red was 0.8 wt%, the maximum energy transfer could be achieved.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1300-1305
• /
• 2018

The tunable electronic performance of the solution-processed semiconductor metal oxide is of great significance for the printing electronics. In current work, transparent thin-film transistors (TFTs) with indium-zinc oxide (IZO) were fabricated as active layer by a simple eco-friendly aqueous route. The aqueous precursor solution is composed of water without any other organic additives and the IZO films are amorphous revealed by the X-ray diffraction (XRD). With systematic studies of atomic force microscopy (AFM), X-ray photoemission spectroscopy (XPS) and the semiconductor property characterizations, it was revealed that the electrical performance of the IZO TFTs is dependent on the concentration of precursor solution. As well, the optimum preparation process was obtained. The concentrations induced the regulation of the electronic performance was clearly demonstrated with a proposed mechanism. The results are expected to be beneficial for development of solution-processed metal oxide TFTs.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.993-997
• /
• 2007

The upflow anaerobic sludge blanket (UASB) reactor can be effective for treating simple organic compounds containing high concentration of ammonia nitrogen. The chemical oxygen demand (COD) removal efficiency was about 80% at ammonia nitrogen concentration up to 6,000 mg-N/L. This result also showed that it would be possible to treat propionate effectively at free ammonia nitrogen concentration up to 724 mg-N/L if sufficient time was allowed for adaptation. However the specific methanogenic activity (SMA) of granule was lower than that of granule in the reactor with lower ammonia nitrogen concentration. At 8,000 mg-N/L, the inhibition of high ammonia concentration was observed with evidence of increase of the volatile suspended solids (VSS) concentration in the effluent. It might be ascribed to the decrease in the content of extracellular polymer (ECP), which resulted to the sloughing off of obligated proton-reducing acetogens and heterogenotrophic methanogens from the exterior of granular sludge. This caused a great portion of the finely sludge to be easily washed out. Therefore, failure to maintain the balance between these two groups of microorganism cause accumulation of the hydrogen partial pressure in the reactor, which could have inhibited the growth of acetate utilizing methanogens.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.4E
• /
• pp.155-160
• /
• 2003

Both ultrasonic velocity at 3 MHz and absorption coefficient for the frequency range of 0.2-2 MHz were measured in an aqueous solution of polyacrylamide for the concentration range of 0.5% to 2.5% by weight. Pulse echo overlap method was taken for measuring the ultrasonic velocity over the temperature range of 10-90℃ and the high-Q ultrasonic resonator method was used for the absorption coefficient at 30℃. The velocity exhibited a maximum value at approximately 70℃, 71℃, 72℃, 73℃ and 74℃ in 2.5%, 2.0%, 1.5%, 1.0%, and 0.5% solutions, respectively. The velocity increased with the concentration at a given temperature. The ultrasonic absorption (a/f²) at a given temperature increased linearly with the concentration for the concentration below 1.5%, but suddenly increased for the concentration above 1.5% concentration. The value of a/f² at 1MHz was entirely due to the classical Stoke's viscous effect. The ultrasonic relaxation in polyacrylamide aqueous solutions, which may be the result of structural fluctuations of polymer molecules such as the segmental motion of the polymer chains, was observed, and at 2.5%, the value of a/f² was found to suddenly increase as frequency decreased.

• Polymer Science and Technology
• /
• v.24 no.3
• /
• pp.254-260
• /
• 2013

• Asian Journal of Turfgrass Science
• /
• v.11 no.2
• /
• pp.97-104
• /
• 1997

The objective of this study was to observe the differences in growth of creeping bentgrass turf to 'polymer coated urea fertilizer' and 'uncoated urea fertilizer', and to analyze durability of fertilizer effect with the 'polymer coated urea'. The experiment was initiated on June 3, 1996, at the Iowa State University Horticulture Research Station, north of Ames, Iowa. The experiment was conducted on an area of 'Penneagle' Creeping bentgrass(Agrostis palustris) maintained at fair-'way mowing height (1.3cm). The study was repeated at the same arrangement beginning on July 25, 1996. Visual quality data, clipping fresh and dry weight, and nitrogen(N) content in the clippings were taken weekly. Quality of the turf increased with increasing N rate. While quality ratings were higher for turf receiving polymer coated urea than for turf receiving uncoated urea at several times following treatment, but not significant. Fresh and dry clipping weights were quite variable during the trial. Visual quality rating and clipping yields improved with increasing rates of N but these differences were not statically significant between polymer coated and uncoated urea treatment. The durability of fertilizer efficiency in polymer coated urea was not last longer compare with uncoated urea from two weeks after treatment. Higher rates of N application increased the concentration of N in tissue but no significant differences between turf plots receiving polymer coated and uncoated urea. Key words: Polymer coated urea, Creeping bentgrass, Fertilizer, Turfgrass.

• Macromolecular Research
• /
• v.12 no.1
• /
• pp.53-62
• /
• 2004

We have prepared polymer composites of low-density polyethylene (LDPE) and ionomers (Surlyn 8940) containing polar segments and metal ions by melt blending with carbon black (CB) as a conductive filler. The resistivity and positive temperature coefficient (PTC) of the ionomer/LDPE/CB composites were investigated with respect to the CB content. The ionomer content has an effect on the resistivity and percolation threshold of the polymer composites; the percolation curve exhibits a plateau at low CB content. The PTC intensity of the crosslinked ionomer/LDPE/CB composite decreased slightly at low ionomer content, and increased significantly above a critical concentration of the ionomer. Irradiation-induced crosslinking could increase the PTC intensity and decrease the NTC effect of the polymer composites. The minimum switching current (Ι$\sub$trip/) of the polymer composites decreased with temperature; the ratio of Ι$\sub$trip/ for the ionomer/LDPE/CB composite decreased to a greater extent than that of the LDPE/CB composite. The average temperature coefficient of resistance (${\alpha}$$\sub$T/) for the polymer composites increased in the low-temperature region.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.314-319
• /
• 2011

The syndiotactic and atactic poly (2-N-carbazoylrnethyl) styrenes were obtained by a half-titanocene catalyst and a radical initiator for the investigation of photophysical properties, especially excimer formation. The atactic polymer exhibited only monomer emission, but the syndiotactic polymer showed both excimer emission and monomer emission resulting from the partial overlapping arrangement of carbazole pendants, The emission band of syndiotactic polymer was considerably dependent on solution concentration and temperature, however atactic polymer was independent because the excimer formation of syndiotactic helical conformation was more favorable than that of the random coil conformation of atactic polymer.

• Archives of Pharmacal Research
• /
• v.12 no.2
• /
• pp.143-147
• /
• 1989

The urea effect on skin permeation of clonidine was investigated to reduce a log time and to increase a permeability. ICR mouse skin and human skin were used and were assumed to be a two-layer membrane consisted of stratum corneum and viable epidermis. The urea acted as a skin denaturant and humectant in the whole epidermis. Also it enhanced the skin permeability of clonidine about 3.5 times. On the other hand, it enhanced the skin permeability by acting as a humectant in the viable epidermis. But the urea effect on the whole epidermis was shown to be greater than that on the viable epidermis. Therefore, it was found that the effect of urea was greater on the stratum corneum than the viable epidermis. Variation of enhancing effect according to the concentration of urea was not found in the range of 1% to 20%.