• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.512-513
• /
• 2007

Carbon/polymer based composite electrodes were fabricated by using Super p. Black(SPB) as a conductor and polyvinylidene fluoride (PVDF) as a binder. This type of composite electrode are considered as excellent candidates for heating film and variable resistor applications. Aim of this work is the study of the Mechanical and Electrical properties on composite electrode by the contents of SPB and MWCNT, respectively. The composite electrode having 10~15 wt% of SPB show good electrical and mechanical properties. Mechanical and electrical properties are increased by the addition of MWCNT into the composite electrode.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.47-53
• /
• 1997

To improve the interfacial bonding of carbon fiber-nylon 6 composite, carbon fiber(CF) were oxidized by nitric acid treatment, and two types of graft polymer(GP) of nylon 6-g-polyacrylamide (PAAm) -water dispersable GP(WDGP) and m-cresol solu ble GP(CSGP) were treated as coupling agents. Introduction of polar groups such as -COOH, -OH, etc, on the surface of the oxidized CF was confirmed by IR spectra. The stem polymer of nylon 6 in the coupling agent (GP) could be compatible with'matrix nylon 5, and the grafted branch of PAAm on GP could react to the polar groups on the oxidized CF in composite. The interfacial strength was measured by the transverse tensile test to the fiber direction for single CF embedded nylon 6 film especially prepared and by the pull-out test method. The interfacial strength of the composite reinforced with oxidized CF is greater than that reinforced with unoxidized CF. The interfacial strength of the composite was increased by treatment of coupling agents(GPs) considerably, and the increasing tendency by the WDGP is greater than that by the CSGP. The optimum conditions of coupling agent treatment are as follows: the concentration, adsorption tlme of GP, and curing temperature are 2%, 20 minutes, and $170^{\circ}$, respectively.

• 공업화학
• /
• 제34권5호
• /
• pp.488-492
• /
• 2023

본 연구에서는, 탄화가 가능한 고분자/리그닌 복합소재 필름을 형성한 후, 제어된 온도 프로파일(profile)을 갖는 탄화 공정을 통해 탄화 생성물을 얻는다. 탄화 공정이 리그닌의 탄화 생성물 및 탄소 필름에 미치는 영향을 파악하여 성공적인 탄화물 생산이 가능한지를 탐색하였다. 얻어진 탄소 필름이 다양한 분자들, 비극성 유기 분자, 극성 유기 분자, 염료 분자 등에 보여주는 흡착 특성을 리그닌의 탄화물과 비교하며 자외선/가시광선(UV/Vis) 분광기로 분석하였다. 순환전류법으로 분석한 결과 본 연구에서 활용한 탄화 과정을 통해 탄소 필름이 성공적으로 얻어졌음을 확인하였다. 다양한 흡착 실험 결과 얻어진 탄화 리그닌이 다양한 분자들에 대한 흡착이 가능함을 보여주었고, 특히 염료 분자에 대해 효과가 가장 높게 나타났다. 이는, 분자 크기가 큰 분자에 대해 흡착이 용이함을 암시한다. 복합소재 필름의 경우 도입된 고분자가 리그닌의 흡착 성능을 다소 약화시키는 것으로 나타났다. 이 연구는 금속 양이온에 대한 흡착 거동을 분석한 이전 결과로 함께 향후 연구에 대한 중요한 정보를 제공할 것이다.

• Composites Research
• /
• 제19권5호
• /
• pp.7-11
• /
• 2006

SWNT(Single-Walled Carbon Nanotubes)와 도전성 고분자 PANi(Polyaniline)로 구성된 복합재료 합성물질을 제조하여 전기적 기계적 특성을 실험적으로 조사하였다. 이러한 재료는 인공근육 등으로 사용될 수 있어서 미소 인공생물체및 로봇의 구동에 응용될 수 있다. 이 작동기는 90% 순도의 SWNT와 화학적 Polymerization을 이용하여 본 연구실에서 개발된 완전히 새로운 방식으로 제조되었다. 4 탐침 측정법(4-probe method)을 사용하여 이 필름형 복합재 작동기의 전기전도도를 측정한 결과 56.15 S/cm의 값을 나타냈으며, 순수 PANi은 17.38 S/cm를 나타내었다. 순수한 도전성 폴리머 보다 3.2배 높은 전도성을 나타내었다. 이 작동기의 재료적 특성은 SEM을 사용하여 분석하였으며, 우수한 특성을 갖고 있었다. 전압이 작용할 때 변형률을 측정하기 위해서 레이저 측정 센서가 부착된 측정장치가 개발되었으며, $NaNO_3$ 용액 속에서 작동되며, 1볼트의 전압이 가해졌다. 초기 길이 12.690 mm에서 12.733 mm로 늘어났으며, 0.34%의 변형률이 계산되었다. 이 값은 호주 Tahhan의 0.23%보다 48% 정도 높은 변형률이다.

• Macromolecular Research
• /
• 제14권4호
• /
• pp.430-437
• /
• 2006

The ultra-drawing process of an ultra high molecular weight polyethylene (UHMWPE) gel film was examined by incorporating linear low-density polyethylene (LLDPE) and $BaTiO_3$ nanoparticles. The effects of LLDPE and the draw ratios on the morphological development and mechanical properties of the nanocomposite membrane systems were investigated. By incorporating $BaTiO_3$ nanoparticles in the UHMWPE/LLDPE blend systems, the ultra-drawing process provided a highly extended, fibril structure of UHMWPE chains to form highly porous, composite membranes with well-dispersed nanoparticles. The ultra-drawing process of UHMWPE/LLDPE dry-gel films desirably dispersed the highly loaded $BaTiO_3$ nanoparticles in the porous membrane, which could be used to form multi-layered structures for electronic applications in various embedded, printed circuit board (PCB) systems.

• Journal of Information Display
• /
• 제3권4호
• /
• pp.4-7
• /
• 2002

A recently developed phase separated composite film method has been employed to fabricate a liquid crystal (LC) based electro-optical device using a single glass substrate. The resulting device is made of adjacent parallel layers of LC and polymer maded by phase separation. The LC layer is confined between the solidified polymer layer on one side and the glass substrate on the other. The electro-optical properties of these devices demonstrate their technological potential in light weight and hand-held electronic products.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.24-30
• /
• 2008

The laminate IPMC actuator have been developed with a commercial Nafion film and platinum electrodes. Equivalent beam and equivalent bimorph beam models for IPMC(Ionic Polymer-Metal Composite) actuators are described. By using a beam equation with estimated physical properities and actuation displacements of a cantilevered IPMC actuator are estimated. And Finite element analysis(FEA) was done by ANSYS.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.463-466
• /
• 2002

A new type of LCD has been developed using recently developed phase separated composite film method with a single glass substrate. The resultant structures are made of adjacent parallel layers of liquid crystal and polymer. The LC layer is confined between the solidified polymer layer and glass substrate. The electra-optical properties of the display have been investigated. This technique has the potential to realize a lightweight display for hand-held portable electronic products.

• Journal of Electrochemical Science and Technology
• /
• 제2권2호
• /
• pp.124-129
• /
• 2011

A simple process of fabricating micropillar structure and its influence upon enhancing electrochemical biosensor response were studied in this work. Conducting polymer PEDOT was used as a base material in formulating a composite with PVA. Micro porous PC membrane filter was used as a template for the micropillar of the composite on ITO electrode. This structure could provide plenty of encapsulating space for enzyme species. After dosing enzyme solution into this space, Nafion film tent was cast over the pillar structure to complete the micropillar cavity structure. In this way, the encapsulation of enzyme could be accomplished without any chemical modification. The amount of enzyme species was easily controllable by varying the concentration of the dosing solution. The more amount of enzyme is stored in the sensor, the higher the electrochemical response is produced. One more reason for the sensitivity improvement comes from the large surface area of the micropillar structure. Application of 0.7 V produced the best current response under the condition of pH 7.4. This biosensor showed linear response to the glucose in 0.1~1 mM range with the average sensitivity of $14.06{\mu}A/mMcm^2$. Detection limit was 0.01 mM based on S/N = 3.

• Advances in nano research
• /
• 제5권4호
• /
• pp.337-357
• /
• 2017

Knowledge of thin films mechanical properties is strongly associated to the reliability and the performances of Nano Electro Mechanical Systems (NEMS). In the literature, there are several methods for micro materials characterization. Bulge test is an established nondestructive technique for studying the mechanical properties of thin films. This study improve the performances of NEMS by investigating the mechanical behavior of Nano rectangular thin film (NRTF) made of new material embedded in Nano Electro Mechanical Systems (NEMS) by developing the bulge test technique. The NRTF built from adhesively-bonded layers of basalt fiber reinforced polymer (BFRP) laminate composite materials in Nano size at room temperature and were used for plane-strain bulging. The NRTF is first pre-stressed to ensure that is no initial deflection before applied the loads on NRTF and then clamped between two plates. A differential pressure is applying to a deformation of the laminated composite NRTF. This makes the plane-strain bulge test idea for studying the mechanical behavior of laminated composite NRTF in both the elastic and plastic regimes. An exact solution of governing equations for symmetric cross-ply BFRP laminated composite NRTF was established with taking in-to account the effect of the residual strength from pre-stressed loading. The stress-strain relationship of the BFRP laminated composite NRTF was determined by hydraulic bulging test. The NRTF thickness gradation in different points of hemisphere formed in bulge test was analysed.