• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 춘계학술대회 논문집
• /
• pp.241-246
• /
• 2010

• 한국세라믹학회지
• /
• 제49권1호
• /
• pp.95-99
• /
• 2012

Silicon carbide ceramics are used for oxidation resistive coating films due to their excellent properties like high strength, good oxidation resistance, and good abrasion resistance, but they have poor formability and are prepared by vapor process which is complicated, costly, and sometimes hazardous. In this study, preparation of silicon carbide coating film by liquid process using polymer precursor was attempted. Coating film was prepared by dip coating on substrate followed by heat treatment in argon at $1200^{\circ}C$. By changing the dipping speed, the thickness was controlled. The effects of plasticizer, binder, or fiber addition on suppression of crack generation in the polymer and ceramic films were examined. It was found that fiber additives was effective for suppressing crack generation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.252-255
• /
• 2003

Recently, there is a growing trend in the United States toward replacing latex additives in polymer-modified cement mortars with redispersible polymer powders. This movement is relatively new in the U.S. but is further advanced in Europe due to the more extensive use of cement and concrete in residential construction. Hitherto, in Korea - there is a very diminutive movement towards this growing trend. Thus, there is limited availability of data on redispersible polymer powders. This study investigates the effectiveness of redispersible polymer powder on improvement of the mechanical properties of modified mortar. It was concluded from the results of the experiments that the size of the dispersed polymer particles, variations in glass transition points (Tg), and variations in minimum film formation temperature (MFT) influenced the strength development of the modified mortars, and optimum strength in modified mortars using redispersible powders can be achieved when the Tg which accounts for the degree of powder flexibility is considered.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1647-1656
• /
• 1998

The drag reduction is the phenomenon that occurs only when the shear stress from the wall of pipe is beyond the critical point. The drag reduction increase as the molecular weight, concentration of the polymer and Reynolds number increase, but it is limited by Virk's maximum drag reduction asymptote. Because of the strong shear force for the polymer on the turbulent flow, the molecular weight and the drag reduction do not decrease. Such mechanical degradation of the polymer occurs in all polymer solvent systems. This paper is to identify and develop high performance polymer additives for fluid transportations with the benefits of turbulent drag reduction. In addition, drag reduction in vertical flow by measuring the pressure drop and local void fraction on vertical-up flow of close system is evaluated.

• 한국화재소방학회논문지
• /
• 제5권2호
• /
• pp.11-20
• /
• 1991

Dilute polymer solutions were injected into turbulent pipe flow of a Newtonian fluid. The local drag reduction for injection of polymer solution at the pipe wall was larger than that at centerline. From the above result we may conclude that the polymer additives were found to influence the flow in the neighborhood of the wall. The effects of the injection apparatus on the local drag reduction are small compared to the drag-reducing effects. The extent of drag reduction increased with polymer concentration and injection flow rate, and the maximum drag reduction obtained were 47% for Polyox Coagulant and 35% for Separan AP-273. In respect to polymer degradation, the polyacrylamide showed better shear stability than the polyethyleneoxide and thus the former expected to have a sharper molecular weight distribution.

• 분석과학
• /
• 제13권3호
• /
• pp.282-290
• /
• 2000

본 연구는 390nm 이하에서 자외선 흡수가 완벽한 폴리카보네이트(광학용)에 첨가된 각종 첨가제를 아세톤으로 추출하거나 용해-침전 방식으로 분리하여 분석하는 것이다. 분리된 첨가제를 정성적으로 분석하기 위해 자외선흡광광도계, FT-IR 및 HPLC로 분석하였다. 분리된 물질은 광안정제 및 산화방지제(1차 및 2차)등의 첨가제와 단량체 및 올리고머가 함유된 복잡한 혼합물로 추정할 수 있다. 분리된 첨가물을 Bondapak $C_{18}$ 칼럼, 메탄올 이동상, PDA (Photodiode Array) 검출기를 사용한 역상(reversed phase, RP) HPLC 분석을 통해 비스페놀 A, Irganox 1010, Cyasorb UV-5411 성분들을 확인할 수 있있다. 또한, 자외선 흡광도를 이용한 정량분석을 통해 폴리카보네이트에 광안정제인 Cyasorb UV-5411가 0.12중량% 함유된 것을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제27권11호
• /
• pp.1819-1824
• /
• 2006

The general objective of the present study was to investigate the potential application of the UV spectroscopic method for determination of the polymeric additives present in papermaking fibrous stock solutions. The study also intended to establish the surface-chemical retention model associated with the adsorption kinetics of additives on fiber surfaces. Polyamide epichlorohydrin (PAE) wet strength resin and imidazolinium quaternary (IZQ) softening agents were selected to evaluate the analytical method. Concentrations of PAE and IZQ in solution were proportional to the UV absorption at 314 and 400 nm, respectively. The time-dependent behavior of polymeric additives obeyed a mono-molecular layer adsorption as characterized in Langmuir-type expression. The kinetic modeling for polymeric adsorption on fiber surfaces was based on a concept that polymeric adsorption on fiber surfaces has two distinguishable stages including initial dynamic adsorption phase and the final near-equilibrium state. The simulation model predicted not only the real-time additive adsorption behavior for polymeric additives at high accuracy once the kinetic parameters were determined, but showed a good agreement with the experimental data. The spectroscopic method examined on the PAE and IZQ adsorption study could potentially be considered as an effective tool for the wet-end retention control as applied to the paper industry.

• 폴리머
• /
• 제35권4호
• /
• pp.337-341
• /
• 2011

수직배향 액정디스플레이의 시야각 향상을 위한 광대역 보상필름을 개발하였다. 상용화된 수직배향 액정디스플레이는 측면 시야각을 보상하는 위상차 필름을 필요로 한다. 일반적으로 triacetylcellulose(TAC)에 광학첨가제를 첨가한 후 제막연신을 통하여 수직배향 액정디스플레이용 위상차 필름을 제작하는데, 첨가되는 광학첨가제의 화학구조에 따라 필름의 위상차와 파장분산 특성이 달라진다. 본 연구에서는 첨가제에 따른 분극률 이방성을 양자역학적으로 계산하고 선택된 중심 이성질체에 사이드 그룹을 치환시켜 파장별 분극률 이방성을 또한 계산하였다. 특히, 치환기가 methoxy와 proplonate인 경우에 치환위치와 숫자에 따른 파장별 분극률 이방성을 비교하였다. 2개의 propionate 그룹이 meta위치에 있을 경우가 파장분산 특성이 가장 완만한 것을 양자역학적 계산을 통하여 예측하였으며 이를 실험을 통해 증명하였다. 파장분산 특성이 완만하다는 것은 LCD 시야각 특성이 광원의 파장에 따라 덜 변한다는 의미이며, 현재 수준보다 우수한 화질을 구현할 수 있다.

• 폴리머
• /
• 제27권3호
• /
• pp.217-225
• /
• 2003

약물의 방출 경향을 제어할 목적으로 폴리비닐피롤리돈 (PVP) 또는 염화나트륨을 함유한 항암제 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine)/poly(L-lactide-co-glycolide) (PLGA) 웨이퍼를 직접 압축성형 방법에 의해 직경 3 mm와 두께 1 mm의 조건으로 제조하였다. 생체외 방출실험에서 BCNLT/PLGA 웨이퍼로부터 약물 방출거동은 웨이퍼에 함유된 첨가제에 의해 조절할 수 있었다. BCNU의 초기 방출량과 방출속도 및 기간은 염화나트륨 또는 PVP의 첨가에 외해 변화하였다. 9L gliosarcoma세포를 이용한 생체 외 항암 활성 실험에서 첨가제가 함유된 웨이퍼로부터 방출된 BCNU를 처리한 세포의 생존율을 분석하여 평가했고, 그 결과 지속적으로 9L gliosarcoma세포의 성장을 억제함을 확인하였다. 9L gliosarcoma세포에 대한 첨가제 함유 BCNU/PLGA 웨이퍼로부터 방출된 BCNU 약효 검색을 통하여 웨이퍼로부터 BCNU가 지속적으로 방출되어 9L gliosarcoma세포의 생존과 증식을 효과적으로 억제함을 확인하였다. 특히, 첨가제 함유 BCNU/PLGA 웨이퍼의 지속적인 성장 억제는 첨가제를 함유하지 않은 웨이퍼의 것보다 더욱 효과적이었다. 또한 염화나트륨 함유 BCNU/PLGA 웨이퍼가 PVP 함유 BCNU/PLCA 웨이퍼보다 세포 증식 억제 효과가 뛰어남을 보였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.119-124
• /
• 2001

This experimental study was conducted to figure out the characteristics of convective heat transfer non boiling vertical downward flow with polymer additives. This experiment was studied in diameter, 800mm heating length and $1{\times}10^5 W/m^2$ heat flux. The polymer concentration ranged 0ppm to 500ppm with corresponding from superficial liquid velocity 1.25m/s to 2.5m/s in non bo vertical up and downward flow. Experimental results show that the characteristics of convective transfer was a strong function of polymer concentration and it has decreased with increasing polymer concentration in non boiling up and vertical downward flow.