• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.103.3-103
• /
• 2001

Recently Electro active polymer has been discussed in various researches as new actuators replacing the human muscles. Since they have confronted a limitation of more advanced application with traditional actuator. IPMC (Ion exchange Polymer Metal Composite) is one of candidate materials for new actuators. In this paper, we propose a new approach and design principle for the IPMC polymer actuator to conquer the weaknesses of IPMC that is intrinsic weak structural stiffness and low trust forces. In the first we performs some experimental works about how the basic specific characteristics of IPMC vary and what the optimal operating conditions are. And we have applied IPMC as active cilium for realization of annelida motion like ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.105.5-105
• /
• 2002

Digital Polymer Motor (DPM) based on dielectric elastomer is presented. It includes all the supplementary parts for actuation such as micro-controller, DC-DC converter etc. DPM can be operated by itself with the program embedded and controlled via serial interface with PC. The actuator accomplishes bidirectional actuation and compliance controllability, which are important characteristics for a biomimetic artificial muscle actuator. DPM accomplish these requirements without any mechanical substitute or complicated algorithms. Its basic concepts and working principles are addressed with modeling and simulation and the compliance controllability are verified by conducting several experiments. $\textbullet$ Polymer, Dielectric, Biomimetic

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.658-664
• /
• 2013

Bending actuators composed of cellulose with an electrically conducting polymer (CP) are fabricated and their performance is characterized in the air. Two different counter ions, perchlorate and tetrafluoroborate are used as dopant ions in the polyaniline CP processing. CP-cellulose-CP trilayer and CP-cellulose bilayer samples are fabricated with different dopant ions, and their actuation performance is evaluated in terms of tip displacement, blocked force and electrical power consumption along with the humidity level and actuation frequency. The trilayer samples substantially enhanced the tip displacement compared to the bilayer ones. The actuation performance of the trilayer actuator is three times better than that of original cellulose electro-active paper (EAPap) actuator. The displacement and blocked force of CP-EAPap actuators are dependent on the humidity and frequency.

• Composites Research
• /
• 제20권3호
• /
• pp.50-54
• /
• 2007

본 연구에서는 IPMC의 기본적인 기계적 특성을 알아보았다. 기전폴리머의 한 종류인 IPMC는 굽힘형 작동, 가벼움, 저전력 소모, 유연성 등의 많은 장점을 가진 재료이다. 따라서 IPMC는 생체모방형 작동기와 센서로서 많은 가능성을 가지고 있다. 이런 가능성을 바탕으로 IPMC를 실제로 응용하기 위하여 IPMC의 변형, 구동력, 주파수 응답 등 기본적인 기계적 특성을 연구하였다. 우선 이온교환폴리머의 한 종류인 네피온 용액을 사용하여 여러 가지 두께의 네피온 막을 만들고, 무전해 도금을 통해 IPMC를 제작하였다. 이렇게 제작된 IPMC의 규격, 인가 전압에 따른 변형, 구동력, 주파수 응답 특성에 관한 실험을 수행하고, 실험 결과를 통해 IPMC 성능의 실험식과 등가 강성 모델을 수립하였다.

• 공업화학
• /
• 제16권4호
• /
• pp.527-532
• /
• 2005

이온성고분자-금속복합체(Ionic Polymer Metal Composites, IPMC)는 전기활성 고분자이며, 낮은 구동전압에서도 큰 변위를 나타내는 유연한 스마트 소재(soft smart material)이다. 이온성고분자-금속복합체의 표면전극 제조는 일반적으로 화학적 환원방법(무전해 전기도금)에 의해 제조되고 있지만, 이러한 방법에서는 그 재료가 다공성 고분자 막으로 표면이 균일한 전극을 제조하기에 어려움이 있다. 본 연구에서는 전극의 표면 저항을 감소시켜 응답속도를 증가시킴과 동시에 낮은 전압에서 큰 변위를 낼 수 있는 IPMC 제조방법을 고안하여 수행하였다. 화학적 환원방법으로 이온고분자-금속 복합체를 형성시킨 후, 이온빔보조증착법(Ion Beam Assisted Deposition)으로 균질한 표면 전극 층을 형성시켜 화학적 특성을 개선하여 전기적 자극에 의한 구동반응 속도를 향상시킬 수 있는 구동체 제조방법을 제안하였다.

• Macromolecular Research
• /
• 제14권6호
• /
• pp.624-629
• /
• 2006

The cellulose-based, Electroactive Paper (EAPap) has recently been reported as a smart material with the advantages of lightweight, dry condition, biodegradability, sustainability, large displacement output and low actuation voltage. However, it requires high humidity.. This paper introduces an EAPap made with a cellulose solution and lithium chloride (LiCl), which can be actuated in room humidity condition. The fabrication process, performance test and effect of LiCl content of the EAPap actuator are illustrated. The bending displacement of the EAPap actuators was evaluated with actuation voltage, frequency, humidity and LiCl content changes. At a LiCl/ cellulose content of 3:10, the displacement output was maximized at a room humidity condition. Even though the displacement output was less than that of a high humidity EAPap actuator, the mechanical power output was not reduced due to the increased resonance frequency, which is promising for developing EAPap actuators that are less sensitive to humidity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.656-659
• /
• 2003

Although Hereafter a mass production will claim for patterning nano sized thickness or line in micro-nano industry. existent lithography fabrication has many usable fields, it has complex fabrication steps, expensive values and row work rates. Development of Dip-pen type nano plotter using polymer actuator can construct row cost mass production system because it will change existent lithography fabrication more simple and easy.

• 대한기계학회논문집A
• /
• 제41권2호
• /
• pp.81-85
• /
• 2017

섬유강화 고분자 복합재료는 섬유 형태의 강화제와 고분자 형태의 기지재료가 결합된 형태로 이는 무게 대비 고강도 및 고강성의 구조물 제작에 용이하다. 본 연구에서는 형상기억합금 와이어가 삽입된 섬유 강화 지능형 연성 복합재 구동기를 제작, 이의 재료 구성에 따른 거동 특성을 평가 하고자 한다. 구동기는 형상기억합금이 포함된 구동층과 일반 구조층으로 구성되어 한 층씩 적층되는 방식으로 제작되며 재료 구성에 따른 거동 특성을 살펴보기 위하여 일반 구조층으로 사용된 유리섬유 직물의 적층 수, 기지재료의 종류를 달리한 뒤 구동 특성을 살펴보았다. 또한, 구동 시에 요구되는 인가 전류의 양을 달리하여 최대 구동각과 최대 구동각에 도달하는 구동 시간을 측정하였다.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.748-755
• /
• 2006

In this paper, a trade-off design and fabrication of IPMC(Ionic Polymer Metal Composites) as an actuator for a flapping device have been described. Experiments for the internal solvent loss of IPMCs have been conducted for various combinations of cation and solvent in order to find out the best combination of cation and solvent for minimal solvent loss and higher actuation force. From the experiments, it was found that IPMCs with heavy water as their solvent could operate longer. Relations between length/thickness and tip force of IPMCs were also quantitatively identified for the actuator design from the tip force measurement of 200, 400, 640, and $800{\mu}m$ thick IPMCs. All IPMCs thicker than $200{\mu}m$ were processed by casting $Nafion^{TM}$ solution. The shorter and thicker IPMCs tended to generate higher actuation force but lower actuation displacement. To improve surface conductivity and to minimize solvent evaporation due to electrically heated electrodes, gold was sputtered on both surfaces of the cast IPMCs by the Physical Vapor Deposition(PVD) process. For amplification of a short IPMC's small actuation displacement to a large flapping motion, a rack-and-pinion type hinge was used in the flapping device. An insect wing was attached to the IPMC flapping mechanism for its flapping test. In this test, the wing flapping device using the $800{\mu}m$ thick IPMC. could create around $10^{\circ}{\sim}85^{\circ}$ flapping angles and $0.5{\sim}15Hz$ flapping frequencies by applying $3{\sim|}4V$.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.197-201
• /
• 1993

A method for the closedloop control of the torsional tip motion of a piezo-polymer actuator is presented. The application of Lyapunov's direct, method to the problem is explored. A feedback control of the torsional tip motion of tile piezopolymer actuator is derived by considering tile time rate of change of the total energy of the system. If the angular velocity of the tip of the actuator is known, all the modes of tile actuator can be controlled simultaneously. This approach has tile advantage over the conventional methods in the respect that it allows one to directly with tile system's partial differential equations without resorting to approximations.