• Journal of fish pathology
• /
• v.24 no.3
• /
• pp.225-236
• /
• 2011

This study was aimed to determine the fish physical status according to the gross and histopathological findings of liver in cultured black rock fish, Sebastes schlegeli. All 47 fish submitted had no marked abnormalities in the external findings. 42.55% of fish showed normal liver, 25.53% yellow liver, 25.53% atrophic brown liver, 4.26% yellowish-green liver and 2.13% fatty liver in gross examination. Grossly normal liver showed no remarkable change in lobular structure but many vacuoles were found in hepatic cell. Hepatic cells took normal roundish, polygonal shapes containing spherical nuclei. In group of yellow-brown liver, many brown pigments were seen in hepatic cells, MMCs and brown-colored hyaline droplets within cytoplasm of hepatocytes. Yellowish green pigments were seen in hepatic cells and MMCs of yellow green liver and green colored hyaline droplets within hepatocytes. The dilated central veins are highlighted with atrophy of hepatic cells. Outline of atrophic hepatocyte became ambiguous and nucleus frequently become small and pyknotic. Fatty liver showed prominent vacuolar structures in cells as clear spaces or foamy cytoplasm with degenerative nuclei. From these results, it was strongly suggested that hepatic gross and histological findings could be used as important and critical health parameters of fish prior to progression to substantial manifestation as clinical disease.

• The Korean Journal of Zoology
• /
• v.25 no.1
• /
• pp.9-28
• /
• 1982

Cyclical changes in the fine structures of the surface epithelial, stroma and glandular cells of guinea pig endometrium during the estrous cycle were studied by transmission and scanning electron microscopy. Cytochemical studies were made in order to investigate the ultrastructural localization of the acid phosphatase, alkaline phosphatase and ATPase in these cells. The results obtained are as follows: 1. The endometrial surface epithelium was pseudostratified columnar during estrus and meterstrus, and simple columnar during proestrus and diestrus. The characteristic features observed in these cells include increased nucleocytoplasmic ratio at proestrus, elongated shapes of both the nucleus and the entire cell, increased volume of the cytoplasm and cytoplasmic bulding into the lumen during estrus, and smaller surface epithelial cells during metestrus. 2. In the cytoplasm of surface epithelial cells, the numbers of mitochondria and free ribosomes were increased, and rough endoplasmic reticulum and Golgi complex appeared during estrus, and the degenerated cells, lipid droplets, multilamellated bodies and lysosomes appeared during diestrus. 3. During estrus, scanning electron microscopic observations of endometrial surface showed a regular arrangement with polygonal outlines of epithelial cells, distinct intercellular border, and bulged surface into the lumen, whereas flat surface and indistinct cell border were characteristic during meterstrus and diestrus. 4. Microvilli which aligned on the surface were longer and most abundant during estrus while short and aparse during other phases. 5. Cytochemical studies indicated that during metestrus acid phosphatase activities were localized in the microvilli and vacuoles, and alkaline phosphatase activities were significant around luminal surface and lateral cell membrane in the surface epithelial cells. ATPase activities were present on the microvilli and cell membrane during proestrus and estrus.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.710-715
• /
• 1993

Physicochemical properties of defatted and lipid-reintroduced kidney bean, mung bean, and corn starches were investigated. Granule shapes of kidney bean and mung bean starches were oval/round, but corn starch was polygonal and each shape was not changed after defatting and lipid reintroducing. The granule sizes of starches ranged $12{\sim}45{\mu}m,\;10{\sim}32{\mu}m\;and\;5{\sim}20{\mu}m$ respectively, but those of lipid reintroduced starches increased slightly. All starches showed Ca type in x-ray diffraction but relative crystallinity was decreased by defatting. The amylose contents of starches increased after defatting but decreased after lipid-reintroduction. The swelling power and solubility of untreated starches at each temperature increased by defatting but decreased by lipid-reintroduction except corn starches. The initial pasting temperatures of kidney bean, mung bean and corn starches by amylograph were $87,\;67\;and\;80^{\circ}C$ respectively, and those of them were lowered by defatting. The peak viscosity, height at $50^{\circ}C$, consistency and setback on amylogram of starches decreased by defatting but increased by lipid-reintroduction.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.37-44
• /
• 2006

Specular reflections provide the visual feedback that describes the material type of an object, its local shape, and lighting environment. In photorealistic rendering, there have been a number of research available to render specular reflections effectively based on a local reflection model. In traditional cel animations and cartoons, specular reflections plays important role in representing artistic intentions for an object and its related environment reflections, so the shapes of highlights are quite stylistic. In this paper, we present a method to render and control stylized specular reflections using projective textures based on principal curvature analysis. Specifying a texture as a pattern of a highlight and projecting the texture on the specular region of a given 3D model, we can obtain a stylized representation of specular reflections. For a given polygonal model, a view point, and a light source, we first find the maximum specular intensity point, and then locate the texture projector along the line parallel to the normal vector and passing through the point. The orientation of the projector is determined by the principal directions at the point. Finally, the size of the projection frustum is determined by the principal curvatures corresponding to the principal directions. The proposed method can control the position, orientation, and size of the specular reflection efficiently by translating the projector along the principal directions, rotating the projector about the normal vector, and scaling the principal curvatures, respectively. The method is be applicable to real-time applications such as cartoon style 3D games. We implement the method by Microsoft DirectX 9.0c SDK and programmable vertex/pixel shaders on Nvidia GeForce FX 7800 graphics subsystems. According to our experimental results, we can render and control the stylized specular reflections for a 3D model of several ten thousands of triangles in real-time.

• Applied Biological Chemistry
• /
• v.41 no.7
• /
• pp.516-521
• /
• 1998

Solubility patterns and gelatinization properties of two waxy rice starches, Sinsunchalbyeo and Hwasunchalbyeo, were investigated. Shapes of all starch granules were round and polygonal, and their X-ray diffraction patterns were all A type. Amylose content and water binding capacity of Sinsunchalbyeo were similar to those of Hwasunchalbyeo. The swelling powers and solubilities of two starches were increased with increasing temperature in range of $65{\sim}95^{\circ}C$, and those of Hwasunchalbyeo was higher. Iodine affinities of soluble fractions in Sinsunchalbyeo starch were higher than those in Hwasunchalbyeo at the same temperature and both were increased with increasing temperature. λmax of soluble fraction of Sinsunchalbyeo starch was highest at $75^{\circ}C$ of heating temperature. The transmittance of starch suspensions were increased rapidly at $60{\sim}65^{\circ}C$. By Rapid Visco Analyzer, initial gelatinization temperature of Sinsunchalbyeo was $67.2^{\circ}C$, and that of Hwasunchalbyeo was $68.2^{\circ}C$. In DSC analysis, onset temperature for gelatinization of Sinsunchalbyeo and Hwasunchalbyeo were $61.3^{\circ}C\;and\;62.9^{\circ}C$, respectively.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.153-162
• /
• 2016

We investigated the physicochemical properties and starch structure of various rice varieties including 15 colored cultivars. NKHC showed the highest level of protein, lipid, and total dietary fiber levels. Reddish brown rice showed higher lipid content than that in black rice cultivars. Apparent amylose content of waxy and non-waxy colored rice varieties was within the range of 3~5% and 15~18%, respectively. IP exhibited the highest total starch (TS) content, whereas, NKHC and HJJ showed lower TS content than that in other cultivars. Pasting temperature of all colored rice cultivars, except IP, was about $68^{\circ}C$. Peak viscosity of IP, JJJ, Hong, and GGHM showed high values of 138, 130, 128, and 124, respectively. All the colored rice cultivars presented A-type X-ray diffraction pattern and polygonal shapes of starch granules were observed using scanning electron micrographs (SEM). Major groups of amylopectin chain lengths were B (12 < DP ${\leq}$ 24) and A (DP ${\leq}$ 12). SMHC showed the highest B chain content and the lowest A chain content (P < 0.05). These experimental results provided useful information for scientists and the food industry regarding colored rice starches.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.252-257
• /
• 2000

The physicochemical and pasting properties of amaranth starches isolated from five cultivars, Andy, Suvarna, Nu World, K266-1, K432, grown in Korea, were investigated. The shapes of starch granules were all polygonal and size was in the range $1.14{\sim}1.48\;{\mu}m$ for all five cultivars. X-ray diffractograms were shown typical A type diffraction patterns for all amaranth starches. The protein and crude lipid contents of starches were $0.13{\sim}0.23%$ and $0.01{\sim}0.05%$, respectively. The apparent amylose contents ranged from $2.79{\sim}4.35%$ and the water binding capacities were $128.05{\sim}135.80%$. The transmittances of 0.1% amaranth starch suspensions except K266-1 increased rapidly above $65^{\circ}C$, thereafter increased slowely. The initial pasting and peak temperature ranges of five cultivars by RVA were $71.3{\sim}73.7^{\circ}C$ and $81.5{\sim}84.0^{\circ}C$, respectively. The peak and cooling viscosities followed the order : Nu World>Andy>Suvarna>K432>>K266-1. Nu World was shown the highest peak (166), final (103) and cooling viscosities (30 RVU). K266-I exhibited the lowest setback (-38) of all five cultivars. Gelatinization (To) and peak temperature (Tp) of amaranth starches in DSC thermograms were $65.7{\sim}68.0^{\circ}C$ and $70.6{\sim}75.8^{\circ}C$, respectively. Enthalpies followed the order: K266-1

• Journal of Periodontal and Implant Science
• /
• v.37 no.sup2
• /
• pp.427-445
• /
• 2007

To improve osseointegration at the boneto-implant interface, several studies have been carried out to modify titanium surface. Variations in surface texture or microtopography may affect the cellular response to an implant. Osteoblast-like cells attach more readily to a rougher titanium surface, and synthesis of extracellular matrix and subsequent mineralization were found to be enhanced on rough or porous coated titanium. However, regarding the effect of roughened surface by physical and mechanical methods, most studies carried out on the reactions of cells to micrometric topography, little work has been performed on the reaction of cells to nanotopography. The purpose of this study was to examme the response of osteoblast-like cell cultured on blasted surfaces and alkali treated surfaces, and to evaluate the influence of surface texture or submicro-scaled surface topography on the cell attachment, cell proliferation and the gene expression of osteoblastic phenotype using ROS 17/2.8 cell lines. In scanning electron micrographs, the blasted, alkali treated and machined surfaces demonstrated microscopic differences in the surface topography. The specimens of alkali treatment had a submicro-scaled porous sur-face with pore size about 200 nm. The blasted surfaces showed irregularities in morphology with small(<10 ${\mu}m$) depression and indentation among flatter-appearing areas of various sizes. Based on profilometry, the blasted surfaces was significantly rougher than the machined and the alkali treated surfaces (p$TiO_2$) were observed on alkali treated surfaces, whereas not observed on machined and blasted surfaces. The attachment morphology of cells according to time was observed by the scanning electron microscope. After 1 hour incubation, the cells were in the process of adhesion and spreading on the prepared surfaces. After 3 hours, the cells on all prepared surfaces were further spreaded and flattened, however on the blasted and alkali treated surfaces, the cells exhibited slightly irregular shapes and some gaps or spaces were seen. After 24 hours incubation, most cells of the all groups had a flattened and polygonal shape, but the cells were more spreaded on the machined surfaces than the blasted and alkali treated surfaces. The MTT assay indicated the increase on machined, alkali treated and blasted surfaces according to time, and the alkali treated and blasted surfaces showed significantly increased in optical density comparing with machined surfaces at 1 day (p<0.01). Gene expression study showed that mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin of the osteoblast-like cells showed a tendency to be higher on blasted and alkali treated surfaces than on the machined surfaces, although no siginificant difference in the mRNA expression level of ${\alpha}\;1(I)$ collagen, alkaline phosphatase and osteopontin was observed among all groups. In conclusion, we suggest that submicroscaled surfaces on osteoblast-like cell response do not over-ride the one of the surface with micro-scaled topography produced by blasting method, although the microscaled and submicro-scaled surfaces can accelerate osteogenic cell attachment and function compared with the machined surfaces.