• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.212-216
• /
• 2013

As virtual reality technologies are advanced rapidly, how to render 3D objects across modalities is becoming an important issue. This study is therefore aimed to investigate human discriminability on the curvature of 3D polygonal surfaces with focusing on the vision and touch senses because they are most dominant when explore 3D shapes. For the study, we designed a psychophysical experiment using signal detection theory to determine curvature discrimination for three conditions: haptic only, visual only, and both haptic and visual. The results show that there is no statistically significant difference among the conditions although the threshold in the haptic condition is the lowest. The results also indicate that rendering using both visual and haptic channels could degrade the performance of discrimination on a 3D global shape. These results must be considered when a multimodal rendering system is designed in near future.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.1
• /
• pp.45-59
• /
• 1996

Ultrafine powders(UFPs) of aluminum nitride(AlN) have been synthesized by chemical reactions in the nitrogen atmosphere and the gaseous aluminum evaporated from Al powders in thermal plasmas produced by a DC plasma torch. A synthesis system consisting of a plasma torch, a finely-controllable powder feeder, a reaction chamber, and a quenching-collection chamber have been designed and manufactured, and a filter for gathering AlN UFPs produced by the quenching process subsequent to the synthesis is set up. The synthesis process is interpreted by numerical analyses of the plasma-particle interaction and the chemical equilibrium state, respectively, and a fully-saturated fractional factorial test is used to find the optimum process conditions. The degrees and ultrafineness of synthesis are evaluated by means of SEM, TEM, XRD, and ESCA analyses. AlN UFPs synthesized in the optimum process conditions have polygonal shapes of the size of 5-100 nm, and their purities differ depending on collecting positions and filter types, and the maximum purity obtained is 72 wt% at the filter.

• Textile Coloration and Finishing
• /
• v.14 no.5
• /
• pp.261-267
• /
• 2002

Cotton fabrics were immersed in aqueous solution of N-methylmorpholine N-oxide(NMMO) with various concentrations, padded by 300% of pick-up, concentrated at $90^\circ{C}$ for 30min under constant-length condition, washed, and dried, to examine a possibility of linen-like finishing by the solvent bonding between fibers. With increasing the concentration of NMMO, cross-sections of fibers changed to oval or polygonal shapes and not only the fibers but also the warp and weft were bonded each other, which produced linen-like effect on the fabrics in the aspects of appearance and mechanical properties such as the Increase of stiffness and shear properties. The thickness, moisture regain and dyeability were increased with the concentration of NMMO.

• International Journal of Ocean System Engineering
• /
• v.1 no.2
• /
• pp.95-101
• /
• 2011

Perforated plates with cutouts (or holes) are widely used in structural members. These cutouts provide stress concentration in plates. Extensive studies have been carried out on stress concentration in perforated plates, which consider cutout shapes, boundary conditions, bluntness of cutouts, and more. This study presents stress concentration analyses of perforated plates with not only various cutouts and bluntness but also different cutout orientations. Especially, the effect of cutout orientation on stress concentration is emphasized since structural members have become more complicated recently. To obtain stress concentration patterns, a finite element program, ANSYS, is used. For the designated goal, three parameters are considered as follows: the shapes of polygonal cutouts (circle, triangle, and square), bluntness (a counter measure of radius ratio, r/R), and rotation of cutouts (${\theta}$). From the analyses, it is shown that, in general, as bluntness increases, the stress concentration increases, regardless of the shape and rotation. A more important finding is that the stress concentration increases as the cutouts become more oriented from the baseline, which is the positive horizontal axis (+x). This fact demonstrates that the orientation is also a relatively significant design factor to reduce stress concentration. In detail, in the case of the triangle cutout, orienting one side of the triangle cutout to be perpendicular to the applied tensile forces is preferable. Similarly, in the case of the square cutout, it is more advantageous to orient two sides of square cutout to be perpendicular to the applied tensile force. Therefore, at the design stage, determining the direction of a major tensile force is required. Then, by aligning those polygon cutouts properly, we can reduce stress concentration.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.477-481
• /
• 1992

As a series of fundamental research projects to produce doenjang (Korean fermented soy paste) of better quality, two kinds of doenjang were manufactured from a traditional meju (Korean soy bean koji) and the mixed with Aspergillus oryzae and Bacillus natto, and histological changes in the cell structures of soy bean of the two were reported doenjang samples were observed and compared during the entire period of fermentation processes. Cell walls of the soy bean were ruptured by pressure and heat during the pressure cooking process and some of them were observed to have the ghost-like shapes. Remarkable differences in the plasmolysis of the cytoplasms were observed between the seed coat and the inner part of soy bean. Small vacuoles resulting from the fusion of the glycoprotein globules by protease and from the hydrolysis of the starch granules by amylase were also observed. Penetration of microorganisms was transferred from the seed coat to the inside of soy bean as the fermentation proceeded. Slimy substances were observed on the seed coat and the parenchyma cells of soy bean fermented with the mixed with Aspergillus oryzae and Bacillus natto. Cell walls of soy bean became difficult to stain and they showed unusual, polygonal shapes as the fermentation proceeded. Samples fermented with the mixed with Aspergillus oryzae and Bacillus natto showed more remarkable tendencies than traditional meju.

• Journal of KIISE:Databases
• /
• v.30 no.4
• /
• pp.362-371
• /
• 2003

In this paper, we propose an optimal interest point extraction method to support shape-base image classification and indexing for image database by applying a dynamic threshold that reflects the characteristics of the shape contour. The threshold is determined dynamically by comparing the contour length ratio of the original shape and the approximated polygon while the algorithm is running. Because our algorithm considers the characteristics of the shape contour, it can minimize the number of interest points. For n points of the contour, the proposed algorithm has O(nlogn) computational cost on an average to extract the number of m optimal interest points. Experiments were performed on the 70 synthetic shapes of 7 different contour types and 1100 fish shapes. It shows the average optimization ratio up to 0.92 and has 14% improvement, compared to the fixed threshold method. The shape features extracted from our proposed method can be used for shape-based image classification, indexing, and similarity search via normalization.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.223-230
• /
• 2023

This study attempted to concider the morphological change of red blood cells after whole body irradiation. Blood samples used red blood cells of white mice and mouse after irradiation. Transmission electron microscope observation results, Anisocytosis was observed in red blood cells 20 days after 5 Gy irradiation. Triangle and tetrapod were observed for small red blood cell types. Poikilocytosis, sickle-shaped Drepanocyte, and Acantocyte were observed in general-sized red blood cells. Schizocyte was observed in red blood cells 20 days after 7 Gy irradiation. Scanning electron microscope observation results, Dacryocyte was observed with microcytes. It was also confirmed that red blood cells were get tangled with each other. In addition, polygonal shapes and half-moon shapes were also observed. In conclusion, it is judged that the modified form of pathological study is more important than the numerical change in the study of red blood cells by radiation exposure. In conclusion, it was confirmed that modified morphological studies are more important than numerical changes in the study of red blood cells by radiation exposure.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.1
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• Journal of Korea Foundry Society
• /
• v.16 no.2
• /
• pp.158-164
• /
• 1996

In copper continuous casting, the soot, which is the incomplete pyrolitic product of acetylene, has been used as a mold coat. In this work, under constant acetylene pressure, the characteristics of soot and the optimum condition of sooting were investigated with different acetylene and oxygen flow rate. The soot particles deposited on the mold surface had mainly spherical shape and their sizes were about 20nm. After reaction with melt, their shapes were changed into polygonal type due to the graphitization. With increasing oxygen flow rate up to $0.6{\ell}/min$, the amount of residues of soot after heat treatment were kept nearly constant. But the amount of residues increased rapidly with further increasing oxygen flow rate. Degree of graphitization was maximum at $0.4{\ell}/min$ and $5{\ell}/min$ of oxygen and acetylene flow rate, respectively.

• Textile Coloration and Finishing
• /
• v.22 no.1
• /
• pp.51-60
• /
• 2010

This research works on the effects of drawing conditions on the physical properties of the drawn worsted yarns. The drawn worsted yarns were made by the yarn drawing system under various drawing conditions such as concentration of reducing agent, draw ratio, setting time of drawn yarn, and concentration of oxidizing agent. The drawn worsted yarns from 2/80Nm to 2/90Nm were obtained from 2/60Nm worsted yarns, the surface and cross-sectional shapes and tensile properties of these various specimens were measured and discussed with the various drawing conditions. The drawing of worsted yarn made constituent wool fiber scratched and made it changing to polygonal cross-sectional shape. The tenacity and modulus were increased with draw ratio and concentration of reducing agent. And tensile strain was increased with draw ratio, which decreased with concentration of reducing agent.