• Journal of Microbiology and Biotechnology
• /
• 제3권1호
• /
• pp.24-30
• /
• 1993

In order to develop a novel yeast which produces the charateristic aroma of soy sauce, a protoplast fusion between Zygosaccharomyces rouxii WFS4 and Torulopsis versatilis IAM 4993 was carried out. Auxotrophic mutants as selective markers were obtained from Zygosaccharomyces rouxii and Torulopsis versatilis by treatment of N-methyl-N -nitro-N-nitrosoguanidine. The conditions of the protoplast formation and the regeneration for fusion were examined. The protoplast fusion using polyethylene glycol 4000 led to the fusion frequency of $4~5{\times}10^{-7}\;cells/ml$. Among fusants, a fusant ST723-F31 presented the best results in terms of the aromaticity of fragrance, the growth pattern, the resistance against salt and the degree of growth according to pH. It makes easy to control the production and the balance of aroma components so that it gives a good flavor, shortens the fermentation period and, simplifies the preparation process when using a bioreactor into which fusant is immobilized.

• 약학회지
• /
• 제52권5호
• /
• pp.394-401
• /
• 2008

In order to access the suppressive effects of piroxicam (PX) and hydrolyzed products of Scutellariae Radix (PSH) on arthritis, we investigated whether PSH gel could suppress the progression of collagen-induced arthritis. PX, one of nonsteroidal anti-inflammatory drugs has been used in the systemic and topical treatment in a variety of inflammatory conditions. Scutellariae Radix, one of the herbal medicines, was used for the purpose of anti-inflammatory and anti-bacterials. For the purpose of transdermal absorption of the hydrogel preparations, two classes of hydrogels (PX, PSH) were formulated with carbomer 940, diethylene glycol monoethyl ether, polyethylene glycol-8-glyceryl caprylate/caprate and triethanolamine. In carrageenan-induced edema in rat hind paws, inhibition of foot swelling was more increased in PSH than PX hydrogel. Rheumatoid factors including serum IgG, IgM and collagen specific antibody were present much lower in PSH gel treated mice than control. Histological examination revealed that PSH hydrogel inhibited infiltration of inflammatory cells into affected paw joint, compared with control. The PSH hydrogel would be a suitable preparation to increase transdermal treatment for anti-inflammatory effects on collagen-induced arthritis.

• 한국미생물·생명공학회지
• /
• 제20권4호
• /
• pp.384-389
• /
• 1992

식물근부균 Fusarium solani의 생육을 강력히 길항하는 Bacillus sp. YBL-7을 토양으로부터 분리하였으며 그 길항기작이 항생물질임을 이미 보고하였다. 분리된 생물방제균 Bacillus sp. YBL-7 균주들 siderophore, 가수분해능 등의 타 방제기능을 도입할 수 있는 다기능적인 방제균으로 육종하기 위해 plasmid vector pE194를 이용하여 효율적인 형질전환 system을 확립하고자 하였으며, 이때 필요한 여러가지 조건을 조사하였다. 생물방제균 Bacillus sp. YBL-7 원형질체 형성의 최적조건은 5시간 배양된 균체를 사용함으로써, 최종농도가 200${\mu}g$/ml인 lysozyme을 $37^{\circ}C$에서 90분간 처리함으로써 원형질체 생성율이 가장 높았다. 삼투압안정 완충제인 SMM bufferso의 sucrose 농도는 0.5M에서 안정하였고, mannitol 재생 배지에서 원형질체를 재생시켰을 경우 첨가된 agar의 농도가 1.2%에서, mannitol은 0.7M의 농도에서 가장 재생율이 높았다. 형질전환율은 polyethylene glycol 농도가 40%(w/v)일 때 가장 높았으며, plasmid DNA와의 접촉시간과 발현배양시간은 각각 10분, 120분에서 가장 효과가 좋았다. 또한 plasmid DNA의 농도는 5$\mu$g/ml 첨가에서 가장 높았으며, 형질전환된 숙주균주 Bacillus sp. YBL-7내에서의 pE194는 매우 안정하게 유지되었으며, 외붕 전자가 도입된 전환체와 숙주균주가 동일한 억제력을 갖는 것으로 확인되었으며, agarose gel 상에서도 고유의 plasmid pE194의 band를 확인 할 수 있었다.

• 한국초지조사료학회지
• /
• 제15권4호
• /
• pp.265-273
• /
• 1995

Seeds of chicory were collected and selected with good germination, emergence and productivity. To develop chicory as a new forage crop seeds were primed with polyethylene glycol (PEG 6000) and coated with some chemicals, and tested in laboratory and field. The results obtained are summarized as follows: 1. Among the seed lines collected, PUlgAH, PU21TH, PU37CH and PU30TK were germinated more quickly and took less time for germination than the others. 2. PUI8AH was the best in emergence and growth although PU21TH showed superior germinative ability among the lines collected. 3. Chicory seeds primed with 20~25% PEG solution for three days at $10^{\circ}C$, or the seeds treated with 25% PEG solution at $15^{\circ}C$ regardless the treatment period showed good germination performances. 4. Osmotic priming with PEG accelerated the germination of chicory, but not in the field. 5. Coated seeds geminated more slowly in Petridishes but showed superior emergence and growth to those of primed or untreated seeds. Treatment 3 showed the best performances in pot experiment. 6. Coated seeds showed remarkable increase in establishment and dry matter yield especially in sod sowing compared to the other sowing method. 7. Most nutrient contents except iron and manganese of chicory were much higher than those of mixed pasture .

• 한국작물학회지
• /
• 제44권2호
• /
• pp.134-137
• /
• 1999

An experiment was carried out to determine the effects of priming and growth regulator treatment of seeds on the emergence and seedling growth of rice, Oryza sativa L. (cv. 'Ilpumbyeo'). Normal seeds were primed in a -0.6 MPa polyethylene glycol solution at 15$^{\circ}C$ for four days with air-bubbling. Then both primed and non-primed seeds were soaked in water, 100 ppm GA$_3$, 2 ppm ABA, and 10 ppm kinetin solutions for 24 hours. The seeds were planted in soil at 3 and 5 cm depths and allowed to germinate in a growth cabinet at 2$0^{\circ}C$. Generally, the emergence rate at the 3 cm seeding depth was higher and emerged faster compared with the 5 cm seeding depth. The emergence rate of primed seeds was higher and emerged faster compared to non-primed seeds. GA$_3$ and kinetin treatments were the most effective to improve the emergence rate of non-primed seeds. Coleoptile length at the 5 cm seeding depth was longer than that at the 3 cm seeding depth. Leaf number, plant height, and root length of primed seedlings were higher compared with non-primed seeds. GA$_3$ promoted the elongation of plant height and mesocotyle length.

• 산업식품공학
• /
• 제13권4호
• /
• pp.251-261
• /
• 2009

In vitro physiological functions such as jack bean (Canavalia ensiformis) urease inhibitory activity and retarding effect of glucose/bile acid of Aloe vera gel concentrated by the optimized DIS (Dewatering Impregnation & Soaking) process conditions were examined. Urease inhibitory activity of DIS aloes ranged from 84.6 to 94.4%, which was similar to or higher than 86.3% of fresh aloe. Also, urease inhibitory activity of DIS aloes was maintained at initial levels after heat treatment (90$^{\circ}C$, 10 min.) and drying treatment (freeze or hot air drying). Urease inhibition pattern from Lineweaver-Burk plot indicated general non-competitive inhibition, and inhibition constants ($K_{IE}$ and $K_{IES}$) of DIS aloes were 41-149 and 87-163 $\mu$L/mL, respectively. DIS(glucose) and DIS(polyethylene glycol) exhibited the highest retarding effect of glucose and bile acid. Their retarding effects were about 1.6 and 1.8 folds higher than that of fresh aloe after 0.5 and 1 hr of the dialysis, respectively. Conclusively, the above in vitro physiological functions of Aloe vera gel concentrated by DIS process suggested that aloe products treated with DIS would have the potential benefits for protection against Helicobacter pylori and reduction of blood glucose and cholesterol levels.

• 한국작물학회지
• /
• 제31권1호
• /
• pp.56-61
• /
• 1986

옥수수품종 (Dekalb XL 72B)과 대두품종 ( Willi -ams)의 발아와 묘신장을 두 온도, 세 토양수분 포텐셜 및 네 polyethylene glycol(PEG) 8,000 수준에서 측정하였다. 각 품종의 20처리종자를 0.2% Thiram에 처리하여 가비중 1.20으로 압축된 살균사양토에 2.0cm 깊이로 파종 분할구배치법 사반복으로 실시하였다. 1. PEG로 한 삼투처리는 고온에서나 저토양수분포텐셜 조건에서 효과가 거의 없었다. 2. 대두는 옥수수보다 높은 묘수분함량을 보였고 두 작물 모두 토양수분 포텐셜과 온도가 증가할수록 수분흡수가 증가되었다. 3. 옥수수의 묘장이 35$^{\circ}C$에서는 대두보다 길었으나 15$^{\circ}C$에서는 짧았다. 4. 옥수수의 건물중은 35$^{\circ}C$에서 감소되었고 대두의 건물중은 토양수분 포텐셜이 증가할수록 감소되었다.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제21권2호
• /
• pp.101-110
• /
• 2018

Purpose: Functional constipation (FC) is a common gastrointestinal (GI) problem affecting children's well-being and quality of life. Although polyethylene glycol (PEG) is recommended as the first line therapy, it is not always applicable in lower socioeconomic populations. Hence, this study aimed to compare clinical courses of FC in children treated with different medications in order to identify prognostic factors related to treatment outcomes. Methods: We reviewed the medical records of patients aged ${\leq}15$ years diagnosed with FC according to the Rome IV criteria from 2007 to 2015 at the GI clinic, Songklanagarind Hospital. Baseline characteristic, medical history, and treatment outcomes were collected at first and subsequent visits. Results: Exactly104 patients (median age at diagnosis, 2.8 years) were diagnosed with FC. The number of follow-up visits per patient ranged from 1 to 35. The median duration of follow-up was 18.0 months (range, 6.0-84.2 months). PEG was given to 21% of patients. During the follow up period, 76% of patients experienced first recovery with a median time to recovery of 9.8 months. There were no significant differences in time until first recovery and relapse between patients who received and those who did not receive PEG (p=0.99 and 0.06, respectively). Age >6 years, normal defecation frequency, no history of cow's milk protein allergy, and use of laxatives were associated with successful outcomes. Conclusion: Treatment outcomes between patients who had and never had PEG demonstrated no significant difference in our study. Hence, current practices in laxative prescriptive patterns may be effective.

• 한국환경과학회지
• /
• 제20권11호
• /
• pp.1499-1507
• /
• 2011

Practical disposal of transformer insulation oil laden with PCBs (polychlorinated biphenyls) by a chemical treatment has been studied in field work. The transformer insulation oil containing PCBs was treated by the required amounts of PEG (polyethylene glycol) and KOH, along with different reaction conditions such as temperatures and times. The reaction of PEG with PCBs under basic condition produces arylpolyglycols, the products of nucleophilic aromatic substitution. Removal efficiencies of PCBs in insulation oil before and after chemical treatment were examined. The removal efficiency of PCBs was very low at lower temperatures of 25 and $50^{\circ}C$. Under the reaction condition of PEG 600/KOH/$100^{\circ}C$/2hr, removal efficiency of PCBs was approximately 70%, showing completely removal of PCBs containing 7~9 chlorines on biphenyl frame which appear later than PCB IUPAC Number 183 (2,2',3,4,4',5',6-heptaCB) in retention time of GC/ECD. However, when increasing the reaction temperature and time to $150^{\circ}C$ and 4 hours, removal efficiency of PCBs reached 99.99% without any formation of PCDDS/PCDFs during the process. Such reaction conditions were verified by several official analytical institutions. In studying the reaction of PEG with PCBs, it confirmed that the process of chemical treatment led to less chlorinated PCBs through a stepwise process with the successive elimination of chlorines.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.335-341
• /
• 2012

Recently, the demand for the miniaturization of printed circuit boards has been increasing, as electronic devices have been sharply downsized. Conventional multi-layered PCBs are limited in terms their use with higher packaging densities. Therefore, a build-up process has been adopted as a new multi-layered PCB manufacturing process. In this process, via-holes are used to connect each conductive layer. After the connection of the interlayers created by electro copper plating, the via-holes are filled with a conductive paste. In this study, a desmear treatment, electroless plating and electroplating were carried out to investigate the optimum processing conditions for Cu via filling on a PCB. The desmear treatment involved swelling, etching, reduction, and an acid dip. A seed layer was formed on the via surface by electroless Cu plating. For Cu via filling, the electroplating of Cu from an acid sulfate bath containing typical additives such as PEG(polyethylene glycol), chloride ions, bis-(3-sodiumsulfopropyl disulfide) (SPS), and Janus Green B(JGB) was carried out. The desmear treatment clearly removes laser drilling residue and improves the surface roughness, which is necessary to ensure good adhesion of the Cu. A homogeneous and thick Cu seed layer was deposited on the samples after the desmear treatment. The 2,2'-Dipyridyl additive significantly improves the seed layer quality. SPS, PEG, and JGB additives are necessary to ensure defect-free bottom-up super filling.