• Journal of the Korean Society of Tobacco Science
• /
• v.16 no.1
• /
• pp.84-89
• /
• 1994

Potato virus Y (PVY) is an important viral disease in burley tobacco in Korea and is mostly transmitted by green peach aphid, Myzus penicae, in nature. Effects of barrier nets on the immigration of the aphid population into tobacco fields and on the control of PVY were investigated in 3 tobacco fields with 1.8 m - height polyethylene (PE) nets on their outer - sides in Iseo - Myeon, Wanju - Kun, Cheonbuk. Immigration of aphids to the tobacco yields started at late April and reached maximum at early June. The immigrating aphid population was apparently blocked by the barrier nets to be reduced by 54-73%. PVY severity was also reduced by the barrier nets. However, the control value was variable, ranging 24-67%, which suggests that effect of the PE net barrier on the prevention of aphid-borne virus might be variable depending on the location and slope of the fields.

• Korean Journal of Ecology and Environment
• /
• v.52 no.1
• /
• pp.28-39
• /
• 2019

This study was conducted to elucidate microplastics detection of freshwater ecosystems in Geum river. Samples are collected at 6 points in freshwater, 5 points in fishes. Freshwater was sampled 100 L per each points and fish species were Opsariichthys uncirostris amurensis, Hemibarbus labeo, Pseudogobio esocinus, Zacco platypus, Micropterus salmoides and Cyprinus carpio. FTIR analyis was adopted to identify microplastic types. Extracted microplastics were PES (polyester), PE (polyethylene), PP (polypropylene), PET (polyethylene terephthalate), PVC(Polyvinyl chloride) in freshwater, and PES, PE, PP, PET, PVC in fishes. Our results were expected to be used basic research information for further study in microplastics of freshwater ecosystems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.2
• /
• pp.125-131
• /
• 2016

The biodegradable film application can escape from plastic environmental pollution. This experiments studied the effect of biodegradable mulch film on the soil microbial community using fatty acid methyl ester method in soybean production field. The soil $NO_3$-N content in polyethylene mulch film (PE) soil was significantly higher than biodegradable mulch film soil (p < 0.05). The soil microbial community of Gram negative bacteria showed significantly higher in biodegradable mulch film soil than PE mulch film soil (p < 0.05). In addition, biodegradable mulch film soil had significantly low ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ compared with those of PE mulch film soil (p < 0.05), indicating that microbial stress decreased. The ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ should be considered as a potential responsible factor for the obvious differentiation that was observed between the biodegradable mulch film soil and PE mulch film soil in a upland field. The results of this experimentation show the potential of using biodegradable mulch film in place of PE.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.398-401
• /
• 2007

The performance characteristics of Polyethylene-Nitrous oxide (PE-N2O) hybrid rocket motor with the variation of the grain geometry was investigated. To compare the performance parameters under the different port number, single and four port grains were used in this study. In order to improve the performance by enhancing mixing between fuel and oxidizer, the fuel grain having the mixing chamber was additionally studied. From the motor firing tests, it is found that the motor having 4-port fuel grain with the mixing chamber showed the highest performance among all cases. Therefore we have confirmed that with only the geometrical change of the fuel grain, it was possible to give quite influential improvement on the motor performance

• Applied Chemistry for Engineering
• /
• v.24 no.6
• /
• pp.668-671
• /
• 2013

This paper describes activated carbon block filters prepared by extrusion for water purifier. The specific surface area of the activated carbon blocks affecting the properties of a polymer binder were investigated. Polyethylene (PE) particles were used as a binder polymer and the effect of particle sizes on changes in the specific surface area of activated carbon blocks in addition to the adsorption properties of chloride anion in the aqueous solution were investigated. The sizes and shapes of PE particles were measured using SEM. The specific surface area of activated carbon was $1186m^2/g$. The specific surface area of PE binder was $444m^2/g$ and $940m^2/g$ with the particle sizes of $200{\mu}m$ and $20{\mu}m$, respectively. In order to verify the performance of the filter, chlorine adsorption experiments were conducted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.426-433
• /
• 2019

After an earthquake, fire and gas explosions are more likely to cause more casualties in cities with many apartment buildings and large complex buildings. In order to prevent this, seismic design is necessary for the fire protection sprinkler system. However, most systems currently use stainless-steel pipes, although synthetic resin pipes are used in some special places. These materials are susceptible to vibration and earthquakes. This study evaluated the displacement absorption flexibility of polyethylene (PE) and aluminum (Al) multi-layered composite pipes to increase the seismic performance in a vibration environment and during earthquakes. The seismic performance was compared with that of a stainless-steel and PE pipes. The seismic characteristics can be measured by measuring the amount and extent of vibration transmitted by the sprinkler pipe. This method can be used to judge the seismic characteristics to attenuate the vibration during an earthquake. The seismic characteristics of the pipe were verified by comparing the logarithmic attenuation rate to the initial response displacement of the vibration generated by the transverse vibration measurement method.

• Polymer Science and Technology
• /
• v.4 no.1
• /
• pp.30-34
• /
• 1993

• 한국가스학회:학술대회논문집
• /
• 1998.09a
• /
• pp.323-329
• /
• 1998

• Resources Recycling
• /
• v.30 no.1
• /
• pp.53-59
• /
• 2021

Waste vinyl generated from household waste has been used as a solid refuse fuel (SRF) due to the presence of impurities such as soil, metal, and glass; however, the amount of SRF used has been decreasing owing to recent environmental problems, thereby necessitating the need for recycling. In this study, the mixed recycled raw material produced from household waste vinyl and polyethylene (PE) single recycled raw material produced from agricultural waste vinyl were examined. Raw material analysis revealed that waste vinyl was mainly composed of polyethylene, and approximately 2% of ash remained in the mixed recycled raw material, whereas no ash was found in the PE single recycled raw material. In addition, the analysis of tensile strength according to the mixing ratio of the two recycled raw materials revealed that the highest tensile strength was approximately 16 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). In addition, the highest bending strength was approximately 39 MPa under the heat treatment temperature of 200 ℃, compression pressure of 30 MPa, and a mixing ratio of 3:7 (mixed:PE single). Therefore, the possibility of recycling waste vinyl was suggested by investigating the change in strength characteristics according to the mixing ratio of the recycled raw materials.

• Membrane and Water Treatment
• /
• v.14 no.1
• /
• pp.19-25
• /
• 2023

The studies on the effect of different plastic properties (e.g., types, shapes, presence of additivies) on the sorption of contaminants in the agricultural environment are limited. In this study, Cu and Pb, the commonly found heavy metals in the environment, were used to investigate the sorption capacities of microplastics (MPs). The Pb sorption capacity increased in the order of polystyrene (PS)<polyethylene (PE)<polyvinyl chloride (PVC). The estimated Cu sorption capacity was greater for the PE films than the PE fragments, while the sorption strength was greater for the PE fragments. This suggests that the shapes of MPs can affect the contaminant sorption capacities. With the PE fragments, the Pb sorption capacity was greater than the Cu sorption capacity by 10-12 times. Also, the Pb and Cu sorption capacities were greater for the PE fragments with additives than the PE fragment without additives. After the sorption of Pb or Cu on MPs, the toxic effects of the Pb or Cu solutions were decreased, suggesting that the toxic effects of contaminants can be affected by the co-presence of MPs in the environment. Overall, the results show that different types and shapes of MPs and the presence of additives can affect the heavy metal sorption capacities of MPs.