• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.332-340
• /
• 2008

Two component polyurethane (PU) flame retardant coatings were prepared by blending trichloro modified polyesters (TCMPs) and isophorone diisocyanate isocyanurate. TCMPs were synthesized by polycondensation of trichlorobenzoic acid (TCBA), a flame retardant component, with adipic acid, 1,4 butanediol, and trimethylolpropane. The content of TCBA was varied in 10, 20, and 30 wt% for the reaction. Theses new flame retardant coatings showed various properties comparable to other non flame retardant coatings. Moreover, we carried out the combustion test and the flammability test for our flame retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TCBA were determined as no burn. The results of flammability test for the coatings with 20 wt% and 30 wt% of TCBA contents indicated the limiting oxygen index (LOI) values of 26% and 29% respectively, which implied relatively good flame retardancy.

• 공업화학
• /
• 제3권2호
• /
• pp.280-287
• /
• 1992

테레프탈산, 비페닐 디카르복시산과 히드로퀴논을 용액중합하여 전방향족 액정 폴리에스테르를 합성하고 테레프탈산과 비페닐 디카복시산의 몰비가 액정중합체의 열적성질, 열안정성 및 메소상의 구조에 미치는 영향을 DSC, TGA, 편광현미경 및 X선회절기로 조사하였다. 본 연구에서 합성한 중합체는 모두 열방성 액정중합체였고 네마틱 액정상을 나타내었으며, 용융온도 및 등방화온도는 중합체중의 비페닐렌구조가 증가함에 따라 약간씩 증가하였다. 또한 중합체의 열안정성은 중합체중의 비페닐렌구조가 증가함에 따라 개선되었으며, 비페닐렌구조를 가지는 중합체의 결정도는 상당히 높아서 약 33%정도로 나타났다.

• 폴리머
• /
• 제26권4호
• /
• pp.439-444
• /
• 2002

n-Alkyloxy기를 가지는 4가지 종류의 서로 다른 benzilidene anhydrides (2a~d)를 4-(n-alkyloxy)benzaldehyde (1a,b)와 diethyl succinate와의 Stobbe condensation, 가수분해, 탈수고리화반응으로 이어지는 연속적인 반응을 통하여 성공적으로 합성하였다. 단량체의 화학적 구조를 분광학적 방법으로 분석하여 합성된 단량체 (2a~d)는 (Z,Z)-이성체로 존재함을 확인하였다. 중합은 질소분위기하 150~$210^{\circ}C$의 온도범위에서 괴상중합법으로 행하여졌다. 합성된 고분자의 화학적 구조와 열적 성질을 각각 분광학적 방법과 TGA, DSC를 이용하여 조사하였다. 합성된 고분자의 성질은 곁사슬의 길이에 따른 화학적 구조에 크게 의존함을 알 수 있었다.

• 폴리머
• /
• 제31권5호
• /
• pp.442-446
• /
• 2007

알칼리 가용성, 광경화형 폴리에스터를 합성하기 위해 플루오렌형 에폭시 아크릴레이트에 다양한 산 2 무 수물을 반응시켰다. LCD (liquid crystal display) 컬러 필터용 블랙매트릭스를 제조하기 위해서 합성된 폴리에스터와 카본블랙 등을 혼합하여 포토레지스트 용액을 조제한 후 리소그래피 공정을 통해 유리 기판 위에 블랙매트릭스패턴을 형성하였다. 합성된 다양한 폴리에스터의 특성과 리소그래피 패턴을 비교 조사하였다.

• Journal of Microbiology and Biotechnology
• /
• 제22권3호
• /
• pp.371-377
• /
• 2012

The present study describes medium-chain-length polyhydroxyalkanoates (mcl-PHAs) production by the Pseudomonas Gl01 strain isolated from mixed microbial communities utilized for PHAs synthesis. A two-step fed-batch fermentation was conducted with glucose and waste rapeseed oil as the main carbon source for obtaining cell growth and mcl-PHAs accumulation, respectively. The results show that the Pseudomonas Gl01 strain is capable of growing and accumulating mcl-PHAs using a waste oily carbon source. The biomass value reached 3.0 g/l of CDW with 20% of PHAs content within 48 h of cultivation. The polymer was purified from lyophilized cells and analyzed by gas chromatography (GC). The results revealed that the monomeric composition of the obtained polyesters depended on the available substrate. When glucose was used in the growth phase, 3-hydroxyundecanoate and 3-hydroxydodecanoate were found in the polymer composition, whereas in the PHAs-accumulating stage, the Pseudomonas Gl01 strain synthesized mcl-PHAs consisting mainly of 3-hydroxyoctanoate and 3-hydroxydecanoate. The transcriptional analysis using reverse-transcription real-time PCR reaction revealed that the phaC1 gene could be transcribed simultaneously to the phaZ gene.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.448-451
• /
• 2007

DuPont Teijin $Films^{TM}$ (DTF) have developed engineered substrates specifically for the flexible electronics market. $Teonex^{(R)}$ Q65, $Melinex^{(R)}$ ST506 and ST504 are biaxially oriented crystalline polyesters with the option of planarised surfaces. These films are emerging as competitive materials for the base substrate in OLED displays and active matrix backplanes. Given the demanding dimensional reproducibility requirements in the display applications, it is critical to control the several factors that can influence the film distortion in order to achieve the ultimate performance. This paper will discuss the impact of thermal stress, mechanical stress and the processing environment on dimensional reproducibility of polyester film and give examples of how this impacts on the film in device manufacture.

• 한국세라믹학회지
• /
• 제37권8호
• /
• pp.760-767
• /
• 2000

Recently, the protection of construction is demanded with environmental pollution. These protect modes are use of concrete admixture, coat of protective polymer and impregnate of surface with chemicals etc. The most widely used impregnation is economical and effective. The define of Impregnation for construction protect is reacted in and consolidated substrate after absorbed. The impregnation agents are Polyesters, Acrylic monomers, Epoxy and Silicone derivatives. Commonly, because the Silane has good water repellency and environmental advantages that it widely used to water proofing agents, dampproofing agents and absorption reducer for concrete of bridges. When application of Silane, it occurs pollution and harmfulness as included organic solvent. The manufactures have tired to emulsification of Silane for the reducing of the defects. The Silane emulsion is vary unstable and does not stored long periods, and it is diminished in good properties with internal reaction. In this study we tried to emulsification of Silane for effectiveness improvement and reduce pollution and hazard and discussed properties variation of emulsion. The Silane emulsions are achieved emulsifying with W/O and O/W type surfactants. It used 0.24% PVA as protective colloid and stable phase is creamy. The creamy Silane emulsion performance as the penetration depth and water absorption rate are above 4 mm and below 0.1. It stable about 6 month at room temperature.

• 한국의류학회지
• /
• 제29권2호
• /
• pp.347-355
• /
• 2005

Biodegradability of cotton/polyester blend fabric was investigated employing activated sluge test, soil burial test and enzyme hydrolysis. Surface changes of the degraded sample were observed through a microscopy. Changes in X-ray diffraction patterns and crystallinity were examined using X-ray diffractometer. Experimental results revealed that biodegradability of cotton/polyester blend fabric was proportional to the blending ratio of cotton, not showing any synergy effect. Polyester 100% hardly degraded in this study. Through the comparison of the experimental method it was shown that the biodegradabilities determined from activated sludge test and enzymatic hydrolysis except soil burial test were linearly related to the blending ratio of cotton in the blent fabrics. It is probably because the biodegradability determined from the retention of tensile strength of fabrics buried in soil was affected by the stress distribution of polyesters throughout the fabric. From the microscopic observations it was revealed that fungi were grown on the fabric surface and the colors turned yellow, brown and black. X-ray diffraction patterns showed that the heights of crystalline peak coming from cotton part in blend fabrics decreased whereas those coming from polyester part increased comperatively as time passed by. Crystallinities of cotton 100% fabric increased slightly at the begining and then decreased continuously.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.151-159
• /
• 2008

The flame-retardant coatings were prepared by blending the synthesized triphosphorus modified polyester in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. It was confirmed that no deterioration of physical properties of PU coatings was observed with the increasing phenylphosphonic acid (PPA) contents. Flame retardancy was tested by a $45^{\circ}$ Meckel burner method and LOI method. With the $45^{\circ}$ Meckel burner method, CATBTP-20C and CATBTP-30C that contain 20 wt% and 30 wt% of PPA, flame retarding component, respectively, showed the first grade flame retardancy with $2.8{\sim}3.9\;cm$ of char length ; and, with LOI method, they exhibited a good flame retardancy as a range of $30{\sim}32%$ of combustion values.

• Journal of Microbiology and Biotechnology
• /
• 제31권2호
• /
• pp.338-347
• /
• 2021

Polyhydroxyalkanoates (PHA) are a family of microbial polyesters that are used as biodegradable plastics in replacement of conventional plastics for various applications. However, the high production cost is the barrier for PHA market expansion. This study aimed to utilize food waste as low-cost feedstock to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei. The effects of acetate (Ac), propionate (Pr), butyrate (Bu), and the short-chain carboxylates derived from food waste were examined on the microbial growth and PHBV production. Results showed that a mixture of carboxylates provided a 55% higher PHBV yield than glucose. The food-waste-derived nutrients achieved the yields of 0.41 to 0.54 g PHBV/g Ac from initial loadings of 450 mg/l to 1,800 mg/l Ac of total carboxylates. And the consumption of individual carboxylate varied between different compositions of the carbon source. The present study demonstrates the potential of using food waste as feedstock to produce PHBV by Haloferax mediterranei, which can provide economic benefits to the current PHA industry. Meanwhile, it will also help promote organic waste reduction in landfills and waste management in general.