• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3445-3447
• /
• 2012

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.215-218
• /
• 1998

Poly(ethylene-2,6-naphthalene dicarboxylate)(PEN)의 분자구조는 주사슬내에 PET의 벤젠환 자리에 나프탈렌환으로 치환된 구조로서, 분자자체의 특성상 강직성을 가지며 PET에 비하여 고탄성률과 고융점을 가짐으로써 산업용 재료로써 주목되고 있음은 잘 알려진 사실이다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.167-168
• /
• 2003

Dimethyl-2,6-naphthalenedicarboxylate(2,6-NDC)와 ethylene glycol(EG)로부터 유도되는 폴리에틸렌 나프탈레이트(PEN)는 폴리에틸렌 테레프탈레이트(PET)보다 열적 및 기계적 특성이 우수한 열가소성 고분자이며[1-2], 폴리에틸렌 글리콜(PEG)은 diol기를 함유한 친수성 고분자로서 의약품 및 기타 가공제로 널리 쓰이는 물질이다. 이미 PET는 이러한 PEC를 PET 합성과정에서 공단량체로 사용해 공중합시킴으로서 친수성을 갖는 PET로 개질하고자 하는 연구[3-4]가 다수 보고되어 왔으나, PEN의 경유는 아직 이에 관한 연구보고가 없는 실정이다. (중략)

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.67-76
• /
• 2004

The effects of drawing temperature and draw down ratio on thermal properties, crystallinity and orientation of poly(trimethylene terephthalate)/poly(ethylene terephthalate) (PTT/PET) 100/0 ,90/10, and 80/20 blends have been investigated. The crystallinity and glass transition temperature increased while cold crystallization temperature and cold enthalpy decreased due to the development of orientation and stress induced crystallization by the cord drawing. Introducing PET to PTT decreased the crystallinity of PTT. However, it enhanced the orientation of PTT/PET blends drawn at below the glass transition temperature of PET. This lead to the increase of tensile modulus and tensile strength of PTT/PET blends. The shrinkage increased with increasing orientation, which might be minimized by the development of crystalline morphology of PTT in the course of cold drawing.

• KSBB Journal
• /
• v.26 no.4
• /
• pp.333-340
• /
• 2011

In this study, gemcitabine-loaded methoxy poly(ethylene glycol)-b-poly(L-lactide) (MPEG-PLLA) microparticles with different PEG block lengths were prepared by a W/O/W double emulsion technique. The present study focuses on the investigation of the influence of various preparative parameters such as the ratio of internal water phase and oil phase, polymer concentration, solvent composition of organic phase and salt concentration of external water phase on the morphology and encapsulation efficiency of the microparticles. The microparticles fabricated at high volume ratios of internal water phase to oil phase and at high polymer concentrations showed a relatively high encapsulation efficiency and low porosity. When a dichloromethane/ethyl acetate mixture was used as solvent, both the encapsulation efficiency and drug loading of the microparticles decreased as the level of ethyl acetate increased. The addition of a salt (NaCl) to the external water phase significantly improved the encapsulation efficiency up to 40%, and the microparticles became more spherical with their size and porosity decreased.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.41-48
• /
• 2001

Polyurethane(PU) microgels were synthesized from poly(caprolactone) diol(PCD) and/or poly(ethylene glycol)(PEG), diisocyanate and 1,2,6-hexane triol by solution polymerization method. A critical gelation concentration of the PU microgels with, mole ratios of PCD/PEG were the important factors influencing the formation and property microgel or macrogels. The physical and thermal properties of the PU microgels prepared with depending upon the structure of diisocyanate, mole ratio of PCD/PEG, and molecular weight of PEG were investigated. It was found that PU microgels were distributed by polydisperse, spherical small particles below 300nm and showed the properties of low viscosity.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.549-554
• /
• 2002

Thermosensitive poly(organophosphazenes) bearing methoxy-poly(ethylene glycol) (MPEG) and alkylamines as substituents have been synthesized and characterized by elemental analysis, NMR spectroscopy, GPC, and DSC. All the polymers exhibited crystallinity, which was probably induced by the MPEG side chain of the polymers. All the polymers exhibited the lower critical solution temperature (LCSTs) in the range of 28 to $94^{\circ}C$ depending on several factors such as mole ratio of the substituents, kinds of PEG and alkylamines. The higher content of MPEG and shorter chain length of alkylamines of the polymers afforded the higher LCST. The LCSTs of the polymers exhibited almost concentration-independent behavior in the range of 3-30 wt % of the polymers in aqueous solutions. The polymers showed the higher LCSTs in the acidic solutions than in the neutral and basic solutions. The ionic strength of the polymer solution affected the LCST, which decreased with increased NaCl concentration. The polymer bearing almost equimolar substitutuents with the -N-P-N- unit has shown the LCST more sensitive to NaCl and pH than that with the -N-P-O- unit. The polymers were found to degrade in acidic solution but be very stable in alkali solution as well as in the buffer solution of pH 7.4.

• Clean Technology
• /
• v.13 no.3
• /
• pp.173-179
• /
• 2007

In this study the amount of equilibrium sorption of C.I. Disperse Yellow 54 dye in the polymeric textiles such as PTT (poly(trimethylene terephthalate)) and PET (poly(ethylene terephthalate)) textiles was measured in the presence of supercritical carbon dioxide at different temperatures, pressures, and time. The amount of dye sorption increased with temperature and pressure in both PTT and PET textiles, but the increasing rate decreased with pressure. The PTT textile has much larger dye sorption than PET textile. The increasing rate of dye sorption decreased with time at same temperature and pressure for both PTT and PET textiles.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.699-706
• /
• 2001

The effects of uniaxial drawing conditions on the molecular orientation of poly (ethylene 2,6-naphthalate) (PEN) are investigated. Birefringence measurements show that the orientation is significantly enhanced at high draw ratio, low drawing temperature, and fast drawing speed. The characteristics of orientation examined by FTIR- ATR dichroism method represent almost same results. Amorphous orientation function increases with drawing rate at $120^{\circ}C$, but it decreases with drawing rate at $141^{\circ}C$. These behaviors can be explained with the relation between crystallization and chain relaxation rates. It is observed that the orientation of PEN film is accompanied by significant alignment of the naphthalene rings of PEN parallel to the film surface.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.198-201
• /
• 2010

We have worked a surface modification to release a strong agglomeration of multi-walled carbon nanotube(MWCNT) and a incorporation of hydrophilic polymer to improve compatibility between MWCNT and polymers. Carboxylated MWCNT was easily obtained by acid treatment and the carboxylate was converted to acylchloride by thionyl chloride. Then, we tried one more synthesizing routes to achieve covalent bonds with poly(ethylene oxide) having amine end groups of low molecular weight. We measured the polymer content on the surface of MWCNT by TGA and observed increased diameter of MWCNT by SEM and TEM analysis.