• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.710-714
• /
• 1998

Organic electroluminescence devices (ELD) with hetero-junction structure were fabricated utilizing poly(p-phenylne vinylene) (PPV) as emitting layer and electron transport layer (ETL). 2-(4-biphenyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole (PBD) was used as an electron transport agent. Copolymers with stilbene type comonomers, such as poly(styrene-co-PVTS), poly(styrene-co-MeO-PVTS) and poly(styrene-co-MeO-ST) were synthesized to be used as a matrix polymer to disperse electron transport agent (PBD). Among the hetero-junction EL devices fabricated with the above materials, the device with poly(styrene-co-PVTS) as matrix polymer for ETL gave the highest luminance ($120.7cd/m^2$, 13 V). EL devices made with poly(styrene-co-MeO-PVTS) or poly(styrene-co-MeO-ST) matrix exhibited lower luminance than the one with polystyrene matrix and the single layer EL (ITO/PPV/Mg) device.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.8-13
• /
• 2007

To overcome drawbacks of the nylon 6/poly (acrylonitrile-co-butadiene-co-styrene) (ABS) blend, nylon 6 blend with poly (acrylonitrile - co-styrene - co-acrylic rubber) (ASA) which containing poly (butyl acrylate) as a rubber phase in substitute of poly (butadiene) in ABS, was examined. Poly (styrene-co-maleic anhydride) (SMA) containing 25 wt% of maleic anhydride (MA) or poly (styrene- co-acrylo-nitrile-co-maleic anhydride) (SANMA) containing less than 3 wt% MA was used as a compatibilizer to fabricate blends having high impact strength. Changes in the mechanical properties of nylon 6/ASA blend with compatibilizer content were similar with those of nylon 6/ABS blend. Blends haying high impact strength was produced when blends contained more than about 20 wt% rubber. Blends containing SAM or SANMA as a compatibilizer were stayed in a injection molding machine at the molding temperature and afterwards specimens for the examination of the impact strength was prepared. Impact strength of blends containing SMA was decreased with retention time, while that of blends containing SANMA was not changed with retention time.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.339-344
• /
• 2002

Poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) diblock copolymer containing high syndiotactic poly (vinyl alcohol) (PVA) was synthesized by the saponification of poly(vinyl pivalate-b-styrene) (poly(VPi-b-St)). For the block copolymer, poly(vinyl pivalate) (PVPi) with trichloromethyl end group was obtained via telomerization of vinyl pivalate with carbon tetrachloride as a telogen and 2,2-azobisisobutyronitrile (AIBN) as an initiator. Then resulting poly(vinyl pivalate) with trichloromethyl end group was used as an effient macroinitiator for the synthesis of poly(VPi-b-St) using atom transfer radical polymerization (ATRP) in the presence of CuCl/2,2'-bipyridine at 130 $^{\circ}C$. The poly(vinyl pivalate) macroinitiator, poly(VPi-b-St), poly(VA-b-St) were characterized by GPC, FT-IR and $^1$H-NMR. And the analysis showed that integrity of the block copolymer was maintained during saponification reaction.

• Applied Chemistry for Engineering
• /
• v.2 no.1
• /
• pp.70-76
• /
• 1991

Water soluble poly(sulfonated styrene-co-acrylic acid) was polymerized with sulfonated styrene and acrylic acid in the presence of silver sulfate at $99^{\circ}C$ for 4 hrs. The complex formation of poly(sulfonated styrene-co-acrylic acid) with Cu(II) was carried out. The maximum absorption wavelength of the poly(sulfonated styrene-co-acrylic)-Cu(II) system at different pH values was observed at 274 nm and 295 nm. The reduced viscosity of the poly(sulfonated styrene-co-acrylic acid)-Cu(II) complex were measured in the various pH ranges. The formation constants and stability constants of poly(sulfonated styrene-co-acrylic acid)-Cu(II) complex were calculated from Bjerrum method. The changes of enthalpy, free energy and entropy in the above reaction were determined by Ringbom method.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.397-402
• /
• 2005

Core-shell Poly(styrene-co-N-isopropylacrylamide) (poly(St-co-NIPAm) was prepared by soap-free emulsion polymerization of styrene (St) and N-isopropylacrylamide (NIPAm) in aqueous solution with potassium persulfate (KPS) as an initiator. The effects of St/NIPAm ratio, concentrations of monomer and crosslinker were studied. Also, Thermo sensitivity of microgels prepared was investigated. Particle size of microgels increased with increasing mol ratio of NIPAm to styrene. Transmittance of the microgel dispersion decreased rapidly when heated above a low critical solution temperature (near $32{\sim}34^{\circ}C$, cloud point). Swelling ratio of the microgel increased with increasing of the concentration of monomer (NIPAm) and decreased proportional to the concentration of crosslinker.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.247-255
• /
• 1992

Polystyrene-poly(caprolactone) (PS-PCL) block copolymer was synthesized from macroazoinitiator, and its compatibilizing effect in poly(2, 6-dimethyl-1, 4-phenylene oxide) (PPO)/poly(styrene-co-acrylonitrile) (SAN, 25wt% acrylonitrile) blend was studied. PS block and PCL block in the block copolymer had shown miscibility with PPO and SAN respectively. The dissolution of SAN into PPO domain was promoted by the addition of the PS-PCL block copolymer.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.299-300
• /
• 2007

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.133-136
• /
• 2008

In order to decrease carbon dioxide, one of the green house gas, poly(styrene carbonate) has been synthesized from carbon dioxide and styrene oxide with zinc glutarate as a catalyst. The polymer has been identified as an alternating copolymer by spectroscopic analysis, FT-IR, $^1H$-NMR, and $^{13}C$-NMR. The number average molecular weight ($M_n$) of the polymer is $5.0{\times}10^4g/mol$ and the glass transition temperature ($T_g$) is $88^{\circ}C$ and its melting point ($T_m$) is $240^{\circ}C$. The cyclic carbonate, styrene carbonate, has been obtained by thermal degradation of the polymer via the unzipping mechanism.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.569-571
• /
• 2006

지구의 온난화를 가속시키는 주요물질인 이산화탄소($CO_2$)와 styrene oxide를 Zinc Glutarate를 촉매로 하여 800-1000psi, $750^{\circ}C$에서 반응시켜 합성한 Poly(styrene carbonate)(PSC)를 질소분위기하 $750^{\circ}C$에서 열분해하여 고리형 styrene carbonate를 합성하였다. 생성물은 GC-Mass로 분석하여 확인하였다.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.226-232
• /
• 2001

The properties of poly(ethylene terephthalate) (PET)/maleic anhydride-grafted polypropylene (MAgPP)/poly(styrene-co-maleic anhydride)(PScMA) ternary blend were investigated. The ternary blend was immiscible based on the glass transition temperatures measured by dynamic mechanical analyzer (DMA). The degradation of MAgPP during melt mixing for 30 min at 280$^{\circ}C$ did not affect the properties of the ternary blend. The interaction among the components was confirmed from the rheological properties, which was increased with the PSCMA contents. In terms of the mechanical properties, it was observed to satisfy the mixture rule for a multiple system.