• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.39-45
• /
• 2009

PVA films were crosslinked with dimethylol dihydroxy ethylene urea (DMDHEU) and three polycarboxylic acids of butanetetracarboxylic acid (BTCA), citric acid and malic acid Different factors influencing the crosslinking treatment with BTCA were investigated including BTCA and sodium hypophosphite (SHP) concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated based on weight change of the PVA films. The gel fraction of PVA films increased with increasing curing temperature and time. And the resistance to water and thermal stability of the crosslinked PVA films improved with the BTCA crosslinking treatment. While crosslinking with citric acid gave the highest gel fraction among the crosslinkers, crosslinking with malic acid showed the highest absorbancy in 0.9% saline solution, which was attributed to lower crosslink density and high number-average molecular weight between crosslinks. The superabsorbent PVA films could be prepared by adjusting the crosslinking condition of PVA with polycarboxilic acids.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.496-503
• /
• 1992

An ISFET urea sensor was fabricated by immobilizing the urease using photosensitive polymer, poly(vinyl alcohol)-SbQ on the H$^+$ sensing $Si_3$$N_4$ thin film of pH-ISFET. The sensor could determine the urea concentration in the range of 1∼50 mg/dl with fast response and good repeatability. For its application to clinical analysis, the interferences of the various materials which cause inhibition in urease catalytic reactions in blood was investigated. The results of the urea measurements in blood plasma using the ISFET urea sensor were compared with these of conventional spectrophotometric method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.321-324
• /
• 2005

This paper presents a preliminary study on the influence of material ductility on diagonal tension behavior of shear-wall panels. There have been a number of previous studies, which suggest that the use of high ductile material such as ECC (Engineered Cementitious Composite) significantly enhanced shear capacity of structural elements even without shear reinforcements involved. The present study emphasizes increased shear capacity of shear-wall panels by employing a unique strain-hardening ECC reinforced with poly(vinyl alcohol) (PVA) short random fibers. Normal concrete was adopted as the reference material. Experimental investigation was performed to assess the failure mode of shear-wall panels subjected to knife-edge loading. The results from experiments show that ECC panels exhibit a more ductile failure mode and higher shear capacity when compared to ordinary concrete panels. The superior ductility of ECC was clearly reflected by micro-crack development, suppressing the localized drastic fracture typically observed in concrete specimen. This enhanced structural performance indicates that the application of ECC for a in-filled frame panel can be effective in enhancing seismic resistance of an existing frame in service.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.1-5
• /
• 2010

The PVA (poly-vinyl alcohol) insulators were spun coated onto ITO coated glass substrates with the capacitors of Glass/ITO/PVA/Al structure. The effects of PVA concentrations (3.0, 4.0 and 5.0 wt%) on the morphology and electrical properties of the films were investigated. As the concentration of PVA increased from 3.0 to 5.0 wt%, the leakage current of device decreased from 17.1 to 0.23 pA. From the AFM measurement, the RMS value decreased with increasing PVA concentration, showing the improvement of insulator film roughness. The capacitances of the films with PVA concentrations of 4.0 and 5.0 wt% were about 28.1 and 24.2 nF, respectively. The lowest leakage current of 1.77 PA was obtained at the film thickness of 117.5 nm for the device with fixed PVA concentration of 5.0 wt%.

• Journal of the Korean Ceramic Society
• /
• v.27 no.5
• /
• pp.605-612
• /
• 1990

In Pb1-xLax(Zry, Tiz)1-x/4O3 system, it selects the composition 7/65/35 (x=7, y=65, z=35) that was reported to have eminent Pyroelectric properties, and that is sintered with PbZrO3＋0.3wt.% PbO2 atmosphere powder. From the sintered ceramic and Poly Vinyl Alcohol, the thin wafers are fabricated with 0-3connectivity, and they are researched in Pyroelectric properties and the others according to volume ratio between ceramic and polymer. It was possible to fabricate the film containing ceramic up to 80vol% in PVA polymer. The increment of PLZT ceramic volume fraction improve the pyroelectric coefficient of the composite. On Pyroelectric coefficient and the figure of merit, a little inflection caused by glass point(Tg) of PVA appeared. The degree of inflection is proportioned to the amount of PVA.

• Journal of Conservation Science
• /
• v.7 no.2
• /
• pp.45-53
• /
• 1998

The Kong-Chung Jung's relics made of wooden materials were pre-examined for conservation. Kong-Chung Jung was a General of the Chosun Dynasty and his weapons were made of wood. The pre-examining method was focused on the quality and species of the wooden weapons. X-ray radiation was used for the observation of wood structure, and the condition of the relics was relatively good although they contained some cracks. The examination of species using optical microscope showed that the species of each relics were Pinus densiflora of hanging scroll pole, Lozoste lancifolia of a top of flagnole, Fraxinus sp. of a flagpole, Phyllostachys sp. of arrow shafts. For the conservation of the relics, celyl alcohol as dimensional stability chemicals was used and poly(vinyl acetate) and epoxy adhesives were also used for the joining and restoring of the relics.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.2
• /
• pp.220-225
• /
• 2012

In batch culture for Poly(vinyl alcohol) (PVA)-degrading enzyme (PVAase) production by a mixed culture, higher pH (pH 7.5) was favorable for PVAase production at the prophase of cultivation, but lower pH (pH 7.0) was favorable at the anaphase. This situation was caused by the fact that the optimum pH for different key enzymes [PVA dehydrogenase (PVADH) and oxidized PVA hydrolase (OPH)] production is various. The activity and average specific production rate of PVADH reached the highest values at constant pH 7.5, whereas those of OPH appeared at pH 7.0. A two-stage pH control strategy was therefore developed and compared for its potential in improving PVAase production. By using this strategy, the maximal PVAase activity reached 2.05 U/ml, which increased by 15.2% and 24.2% over the fermentation at constant pH 7.5 and 7.0.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.153-155
• /
• 1998

PTFE 합성공정에서 대량으로 사용하는 고가의 음이온계 유화제를 분리/회수하는 것은 경제적인 문제 뿐만 아니라 환경적으로도 매우 중요하다. 음이온계 유화제의 회수에는 Water-evaporation, ion-exchange, freezing, electrodialysis등의 방법을 사용할 수 있다. 그러나 회수에 드는 경비가 높고 장치가 복잡하다는 단점이 잇다. 반\ulcorner에 막분리 공정은 장치가 간단하고 상대적으로 경비가 적게 든다는 장점이 있다. 본 연구에서는 음이온계 유화제를 분리/회수하기 위해서 역삼투 공정을 사용하였다. 그러나 역삼투 공정과 같이 압력을 분리의 구동력으로 하는 막분리 공정에서는 농도분극 및 막오염 현상에 의한 투과량의 감소가 심각하게 일어나며 전체적으로 막분리 공정의 경제성을 떨어뜨리는 주된 요인이 된다. 특히 이온성 막을 사용할 경우 막과 이온성 용질간의 정전기적 포텐셜이 화학적 포텐셜과 함께 투과분리의 구동력을 이루게 되므로 투과거동이 매우 달라지게 된다. 본 연구에서는 막 재료의 이온특성과 음이온성 용질의 농도에 따른 막오염 현상의 관찰 및 이것이 투과거동에 미치는 영향을 관찰하였다. 이를 위해 Sodium alginate, Chitosan, Poly(vinyl alcohol)을 이용하여 각각 음이온성, 양이온성, 중성 막을 제조하여 투과거동을 관찰하였다.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.28-34
• /
• 2004

The polarizing film application exploits the unique physicochemical properties between PVA(Poly vinyl alcohol) film and CTA(Cellulose triacetate) film. However, hardly any research was aimed at improving the adhesion characteristics of the CTA film by radio frequency(RF) plasma treatment at argon(Ar) gaseous state. In this report, we deal with surface treatment technology for protective CTA film developed specifically for high adhesion applications. After Ar plasma, surface of the films is analyzed by atomic force microscopy(AFM), roughness parameter and peel strength. Furthermore, the wetting properties of the CTA film were studied by contact angle analysis. Results obtained for CTA films treated with a glow discharge showed that this technique is sensitive to newly created physical functions. The roughness and peel strength value increased with an increase in treatment time for initial treatment, but showed decreasing trend for continuous treatment time. The result of contact angle measurement refer that the hydrophilicity of surface was increased. AFM studies indicated that no considerable change of surface morphology occurred up to 3 minutes of treatment time, but a considerable uneven of surface structure resulted from treating time after 5 minutes.

• Journal of Korean Society on Water Environment
• /
• v.38 no.4
• /
• pp.171-176
• /
• 2022

Recently, an autotrophic single-stage nitrogen removal (ASSNR) process based on the anaerobic ammonium oxidation (ANAMMOX) reaction has been proven as an economical ammonia treatment. It is highly evident that double-layered gel beads are a promising alternative to the natural biofilm for ASSNR because of the high mechanical strength of poly(vinyl alcohol) (PVA)/alginate structure and efficient protection of ANAMMOX bacteria from dissolved oxygen (DO) due to the thick outer layer. However, the thick outer layer results in severe mass transport limitation and consequent lowered bacterial activity. Therefore, the effects of the thickness of the outer layer on the overall reaction rate were tested in the biofilm model using AQUASIM for ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB) and ANAMMOX bacteria. A thickness of 0.5~1.0 mm is preferred for the maximum total nitrogen (TN) removal. In addition, a DO of 0.5 mg/L resulted in the best total nitrogen removal. A higher DO induces NOB activity and consequent lower TN removal efficiency. The optimal density of AO B and NO B density was 1~10% for a 10% ANAMMOX bacterial in the double-layered PVA/alginate gel beads. The real effects of operating parameters of the thickness of the outer layer, DO and concentrations of biomass balance should be intensively investigated in the controlled experiments in batch and continuous modes.