• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.5
• /
• pp.426-433
• /
• 2008

We first demonstrated simultaneous patterning and passivation of P3HT active layer with photosensitive PVA. The passivation layers were obtained by annealing the organic layers after developing PVA and subsequent over-etching the P3HT layer. The fabricated OTFTs were electrically characterized. The OTFTs exhibited the mobility of ${\sim}5.9{\times}10^{-4}\;cm^2/V{\cdot}s$ and on/off current ratio of ${\sim}10^4$. After passivation, the results showed the extended lifetime of ${\sim}250$ hours with photosensitive PVA layer.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.421-427
• /
• 2010

Alizarin Red S modified screen printed carbon electrodes were developed for the electrochemical detection of aluminum ion. The electrodes developed use screen-printed carbon electrodes(SPCEs) coupled with chemical modification with an organic chelator, Alizarin Red S(ARS), for aluminum ion detection in aqueous solution. For sensor fabrication ARS was directly immobilized on the surface of SPCEs using PVA-SbQ(The poly(vinyl alcohol) bearing stryrylpyridinium groups). Aluminum concentrations were indirectly estimated by amperometric determination of the non-complexed ARS immobilized on the electrodes, after its complexation with aluminum. The sensitivity of the sensor developed was $3.8\;nA{\mu}M^{-1}cm^{-2}$ and the detection limit for aluminum was $25\;{\mu}M$.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.1
• /
• pp.35-40
• /
• 2002

We prepared a novel dosage form, peel-off type soft hydrogel using poly(vinyl alcohol), and evaluated the effect of skin penetration enhancer on the indomethacin release from soft hydrogel by in vitro permeation and in vivo absorption test. In this study, we used four enhancers-urea, dimethyl urea, 1,1,3,3-tetramethyl urea, and pirotiodecane (1-[2(decylthio)ethyl]azacyclopentane-2-one, $HPE-101^{circledR}$). In addition, we evaluated the primary skin irritation test of soft hydrogel using rabbit. From these results, we could find the pirotiodecane was a prominent enhancer, and soft hydrogel seemed to be safe and have no irritancy.

• Journal of Radiation Industry
• /
• v.2 no.3
• /
• pp.129-133
• /
• 2008

PVA nanofibers containing silver nanoparticles were prepared by two methods. The first method was electrospinning of irradiated solution. The prepared $PVA/AgNO_3$ solution was irradiated by gamma-rays. And then the irradiated solution was electrospun. The second method was irradiation of electrospun nanofibers. Nanofibers prepared by electrospinning of unirradiated $PVA/AgNO_3$ solution. The morphology of the nanofibers was observed with a SEM, TEM. When the irradiated $PVA/AgNO_3$ solution were electrospun, the average size of the Ag nanoparticles was increased, but their number was decreased.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.12
• /
• pp.1249-1256
• /
• 1997

Single phase La1-xSrxCoO3 (x≤0.2) was synthesized as a uniform sized 100 nm particulates with relatively high surface area of 20-30 m2/g, at low temperature (≥600 ℃), from a polymeric gel precursors prepared by using poly(vinyl alcohol) as homogenizer. No minor phase developed during the crystallization when polymer/metal mole ratio was higher than 3. As the polymer/metal mole ratio was raised in the gel, the amount of carbonaceous residues in the amorphous solid precursor prepared by heating the gel at 300 ℃ increased. Most of the residues were eliminated by exothermic thermal decomposition around 400 ℃. The amount of residual carbon (less than 1%) left in the crystalline La1-xSrxCoO3 decreased as more polymer was used, eliminating detrimental effect which might be posed by using large amount of organic homogenizer. The crystal structure of La1-xSrxCoO3 synthesized at temperature lower than 800 ℃ was observed to be shifted from rhombohedral to more symmetric cubic. The structure shifted back to rhombohedral as the cubic sample was annealed at 1000 ℃.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.870-876
• /
• 1996

Microcapsules containing 2,4,4'-trichloro-2-hydroxydiphenyl ether (DP) and perfumes were prepared by the coacervation using poly (vinyl alcohol) and crosslinking agents. Internal phase content, percent releasing of core materials, antimicrobial activities of microcapsules and fabrics treated with them were investigated. The internal content of microcapsules containing perfumes and DP are increased with increasing perfumes. The internal content of cacharia in the microcapsue was higher than that of lemon and its maimum value was 93%. The microcapsules containing perfumes and DP did not release cacharia and lemon at roonl temperature. But the amount of perfumes released from microcapsules were increased with temperature and time of microcapsules containing DP and perfumes showed 100% reduction percentage of bacteria. The size of obstruction of fabrics treated with microcapsule containing DP and perfumes were increased with DP content in microcapsules.

• Advances in materials Research
• /
• v.3 no.4
• /
• pp.183-197
• /
• 2014

Copolymers of gelatin and poly (vinyl alcohol), (PVA) grafted by acrylic acid (AAc) with excellent water absorption and retention abilities under neutral conditions were successfully synthesized using $^{60}Co$ gamma radiations in presence of ammonium persulphate (APS), as water soluble initiator and sodium bicarbonate ($NaHCO_3$) as foaming agent. The optimum synthesis conditions pertaining to maximum swelling percentage were evaluated as a function of gelatin/PVA ratio, amount of water, concentration of APS, $NaHCO_3$, monomer concentration and total irradiation dose. Maximum percent swelling (1694.59%) of the copolymer, gelatin-co-PVA, was obtained at optimum $[APS]=2.92{\times}10^{-1}mol/L$, $[NaHCO_3]=7.94{\times}10^{-2}mol/L$ and 1.5 mL of water at total dose of 31.104 kGy while in case of grafted copolymer, (gelatin-co-PVA)-g-poly(AAc), maximum percent swelling (560.86%) was obtained using $8.014{\times}10^{-1}mol/L$ of AAc in 9 mL water with 31.104 kGy preirradiation dose. The pristine and grafted copolymers were characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning electron Microscopy (SEM), Thermal gravimetric analysis (TGA) and X-Ray Diffraction (XRD) methods. The copolymers loaded with an antiseptic, Povidone, were used as wound dressing materials for wounded gastrocnemius muscle of mice and the results exhibit that (gelatin-co-PVA)-g-poly (AAc) copolymer is a potent wound dressing material as compared to the copolymer.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.969-975
• /
• 2009

This article describes the topical delivery and localization of budesonide through the hairless mouse skin. Two poly(ethylene oxide)-block-poly($\varepsilon$-caprolactone)-block-poly(ethylene oxide) (PEO-PCL-PEO) triblock copolymers (T 222 and T 252) having different CL:EO ratios were added in the preparation of budesonide particles stabilized with poly(vinyl alcohol) (PVA) and Tween 80 under ultrasonication. For comparison, a commercial PEO-PPO-PEO triblock copolymer (F68) was studied under the same condition. To demonstrate the effects of the triblock copolymer, the particle size of budesonide emulsion, entrapment efficiency, and in vitro release were measured and compared. The budesonide particles stabilized by the triblock copolymers had a diameter of ca. 350 nm with entrapment efficiencies of 66-76%. The In vitro release profiles of all samples showed an initial burst followed by sustained release. The skin penetration and permeation of budesonide were analyzed by using a Frantz diffusion cell. T 222 and T 252 exhibited higher total permeation amounts, but lower budesonide penetration amounts, than F68. The results suggest that the partitioning of budesonide in each skin layer can be adjusted in order to avoid skin thinning and negative immune response arising from the penetration of budesonide in blood vessels.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.542-548
• /
• 2003

Nanoparticles with unsaturated poly(hydroxyalkanoate)s (UPHAs) biosynthesized with Pseudo-monas oleovorans were prepared by spontaneous emulsification solvent diffusion method. The influence of nanoparticle formation was investigated with various experimental parameters such as sonication conditions, sol-vent, surfactant and polymer contents, etc. The physical and chemical properties of UPHAS and its nanoparticles were characterized using $^1$H- and $\^$13/C-nuclear magnetic resonance spectroscopies, attenuated total reflection infrared spectroscopy, differential scanning calorimetry and gel permeation chromatography. The morphology of particles was observed using scanning electron microscope and the size and distribution of nanoparticles were measured with electrophoretic light scattering spectrophotometer. The mean diameter of particles decreased with increasing sonication amplitude and time. The addition of ethanol into UPHAS chloroform solution decreased the particle size presumably due to increased solvent diffusion into water phase. The particle size increased with increased the concentration of UPHAS solution. Under the 2-4％ poly(vinyl alcohol) (PVA) aqueous solution the minimum mean diameter of particles was shown. The higher degree of hydrolysis and degree of polymerization of PVA increased the mean diameter of particles.

• Journal of Bio-Environment Control
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2007

This study was carried out to investigate the effects of tree-spray of calcium formate compound extracted from oyster shell with several active agents on the calcium concentration, fruit skin shape and quality of 'Fuji' apple. The tree-spray of calcium formate compound extracted from oyster shell (Os-CaF, $52.4\;mg{\cdot}kg^{-1}$) appeared to have more effectiveness on the calcium translocation into leaves, fruit skin and flesh than control. Addition of adjuvants to Os-CaF increased calcium concentration of 'Fuji' apple when sprayed three times before harvest. Among the active agents examined, the treatment ascorbic acid and poly-vinyl alcohol (PVA) in leaves, Ag-colloidal and PVA in fruit skin, ascorbic acid, Ag-colloidal, and PVA in fruit flesh exhibited highest effectiveness. Fruit qualities (fruit weight, firmness, soluble solids, acidity and Hunter value) were not affect by Os-CaF on different concentrations and solutions of active agents.