• Macromolecular Research
• /
• 제15권6호
• /
• pp.491-497
• /
• 2007

NPT Monte Carlo simulations were performed to calculate the molecular properties of syndiotactic poly(vinyl chloride) (PVC) and syndiotactic poly(vinyl alcohol) (PVA) melts using the configurational bias Monte Carlo move, concerted rotation, reptation, and volume fluctuation. The density, mean square backbone end-to-end distance, mean square radius of gyration, fractional free-volume distribution, distribution of torsional angles, small molecule solubility constant, and radial distribution function of PVC at 0.1 MPa and above the glass transition temperature were calculated/measured, and those of PVA were calculated. The calculated results were compared with the corresponding experimental data and discussed. The calculated densities of PVC and PVA were smaller than the experimental values, probably due to the very low molecular weight of the model polymer used in the simulation. The fractional free-volume distribution and radial distribution function for PVC and PVA were nearly independent of temperature.

• 접착 및 계면
• /
• 제11권3호
• /
• pp.89-99
• /
• 2010

본 논문에서는 poly(vinyl acetate-co-ethylene)을 산화, 환원 방법으로 중합할 때 poly(vinyl alcohol) (PVOH)이 최종 에멀젼의 물성에 미치는 영향과 pH의 변화가 최종 에멀젼의 물성에 미치는 영향에 대하여 알아보았다. 실험 결과 PVOH의 분자량이 에멀젼 성질에 크게 영향을 미쳤다. 분자량이 낮은 PVOH 이용 시는 점도가 낮은 제품을 얻었고, 분자량이 큰 PVOH를 이용 시는 높은 점도의 제품을 얻었다. 그러나 pH를 변화 시키면서 중합한 제품의 최종 성질은 PVOH에 대하여 다른 결과를 얻었다. 일반적으로 중합도가 높고 부분 검화물의 PVOH를 이용한 poly(vinyl acetate) 에멀젼 최종점도는 상대적으로 매우 높은 점도를 유지하는 데 비하여, VAE 에멀젼에서는 높은 pH에서 합성 시에는 낮은 에멀젼의 점도를 얻었다. 이것은 에멀젼 합성 중에 PVOH의 분자량의 저하에 의한 영향으로 판단된다. pH가 증가 할수록 그라프트율이 감소하고, 분자량이 감소하면서 점도가 낮아진다는 결과를 얻었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.130-134
• /
• 1998

The physical properties of poly(vinyl alcohol) (PVA) are highly dependent on the degree of syndiotacticity, which is determined primarily by the choice of the vinyl ester monomer precursor. Efforts to produce more syndiotactic PVAs, as well to increase the molecular weight, have centered on the polymerization of vinyl trifluoroacetate,$^1$ vinyl trichloroacetate,$^2$ and vinyl pivalate (VPi).(omitted)

• 청정기술
• /
• 제16권2호
• /
• pp.73-79
• /
• 2010

본 연구에서는 여러 가지 친환경적인 장점을 가지고 있는 초임계이산화탄소를 이용하여 비닐아세테이트 (vinyl acetate, VAc)를 분산중합하였다. 일반적인 유화중합에서보다 더 큰 분자량의 폴리비닐아세테이트(poly(vinyl acetate), PVAc)를 더 높은 수율로 생성시키고자 온도를 333.15 ~ 343.15 K, 압력을 20 ~ 40MPa, 개시제를 0.5 ~ 5%, 실리콘계 안정제를 1 ~ 10%, 반응시간을 2 ~ 50 시간으로 변화시켜 가면서 초임계이산화탄소 내에서 VAc를 반응시킨 후 생성되는 PVAc의 수율과 분자량 변화를 알아보았다. 그리고 최종 목표물인 폴리비닐알코올(poly(vinyl alcohol, PVA))를 PVAc로부터 합성하기 위해 비누화를 시키고 비누화 조건이 PVA의 분자량에 미치는 영향을 검토하였다.

• 한국표면공학회지
• /
• 제42권2호
• /
• pp.59-62
• /
• 2009

Antireflection pattern, moth-eye structure, was fabricated on lens using Ultra Violet nanoimprint lithography and flexible template. Ni template with conical shaped structure was used as a master template to molding. The flexible poly vinyl alcohol template was fabricated by molding. This poly vinyl alcohol template was used as an imprint template of imprint at lens. Using Ultra Violet nanoimprint lithography and poly vinyl alcohol template, polymer based moth-eye structure was formed on lens and its transmittance was increased up to 94% from 92% at 550 nm wavelength.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.377-382
• /
• 2011

Poly(vinyl alcohol) (PVA) is an interesting material with good biocompatibility, high elasticity and hydrophilic chacrateristics. In this study, crosslinked hydrogels based on PVA, and poly(acrylic acid) (PAAc) were prepared by gamma-ray irradiation. PVA and PAAc powders were dissolved in deionized water, and then irradiated by a gamma-ray with a radiation dose of 50 kGy to make hydrogels. The hydrogels were then annealed in an oven at $120^{\circ}C$ for 10 min, 30 min and 50 min under nitrogen atmosphere. The properties of a hydrogel such as gel fraction, swelling behavior, thermogravimetric analysis (TGA) and adhesive strength as a function of PAAc content and annealing time were investigated. The gel fraction decreases with decreasing PAAc content and increasing annealing time. The thermal behaviors have shown different patterns according to the annealing time. The adhesive strength increases with increasing PAAc content.

• 접착 및 계면
• /
• 제12권1호
• /
• pp.1-10
• /
• 2011

자동화된 반응 열량계를 이용하여 중합비율을 관찰하면서 blockiness가 다른 PVOH를 이용하여 VAE 에멀젼을 합성하였다. 입자 분포도를 관찰 결과 단량체와 물과 비율에 따른 일정한 그라프트율은 없었다. 초기 단량체-물의 비율이 낮은 곳에서 겔 효과가 관찰되었다. 또한 입자 분포는 넓고 이중 피크가 관찰되었다. 지속적으로 제한적으로 응징집되면서 입자성장이 이루어지는 것이 관찰되었다. 이것은 제한적인 응집현상과 사슬이 PVOH로 그라프팅되어 발생한 결과로 판단된다.

• 한국응용과학기술학회지
• /
• 제11권1호
• /
• pp.53-60
• /
• 1994

The Synthesis of azobenzene containing long chain fatty acid and poly vinyl alcohol by esterification reaction($C_{n}-Azo-PVA$) was optimized, starting from P-(P'-hydroxy phenyl azo)-benzoic acid and the product of reaction containing azobenzene chromophores was investigated by ultraviolet spectrophotometery in toluene solvent at room temperature. In addition, UV absorption spectra of Langmmuir Blodggett (LB) film deposited on quartz plate have been measured and the structure of these compounds were ascertained by means of Ultraviolet and FT-IR. Recrystallization of reaction product in the solvent results the experimental yield obtained about 22.27% P-(P'-octadecyloxy phenyl azo)-benzoic acid-poly vinyl alcohol. Long chain azobenzene derivative-poly vinyl alcohols are induced phtoisomerization by u, v, and visible light irradiation. The LB film of azobenzene containing long chain fatty acids($C_{18}-Azo-PVA$) are possible of being applied to functional molecular devices such as photomemory and light switching.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.135-139
• /
• 1998

Poly(vinyl acetate) (PVAc) from which atactic poly(vinyl alcohol) (PVA) is derived, is always noncrystalline. This was attributed to the irregular steric arrangement of the acetyl groups in PVAc. However, the X-ray diffraction patterns of atactic PVA, a derivative of PVAc, were found to show distinct crystallinity, and to give an identity period of 2,52 ${\AA}$ along the fiber axis, despite the expectation of an irregular arrangement of the hydroxyl groups in atactic PVA, in the same manner as that of the acetyl groups in PVAc.(omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.48-51
• /
• 2003

Poly(vinyl alcohol) (PVA) obtained by the saponification of poly(vinyl ester) like poly(vinyl acetate) or poly(vinyl pivalate) is a linen. semicrystalline polymer, which have been widely used as fibers for clothes and industries, films, membranes, medicines for drug delivery system, and cancer cell-killing embolic materials[1-3]. PVA fibers and films have high tensile and compressive strengths, high tensile modulus, and good abrasion resistance due to its highest crystalline lattice modulus. (omitted)