• 접착 및 계면
• /
• 제24권2호
• /
• pp.69-75
• /
• 2023

최근 자기복원(self-recovery) 코팅층을 가진 자동차용 도장면 보호필름의 적용이 증대되고 있다. 본 연구에서는 poly(urea-urethane) hybrid 자기복원 코팅층을 가진 poly(vinyl chloride) 기재 보호필름에 대한 기본 물성에 대한 평가 결과를 보고한다. Poly(urea-urethane) 기반 코팅층을 구성하고 있는 주요 화합물의 비율과 코팅층의 두께 변화에 따른 자기복원성능을 확인하였으며, 색차 값 측정을 통해 내오염성능을 정량화 하였다. 또한, 소수성 첨가제로 외부 오염에 대한 표면특성을 향상시키기 위하여, 소량의 실리콘계 반응형 첨가제를 코팅 조성물에 함량에 따른 easy-cleaning 효과와 접촉각을 확인하였다. 마지막으로, poly(urea-urethane) 자기복원 코팅층을 가진 보호필름의 장기간 사용에 따른 변색 및 변형에 대한 가능성을 확인하고자 촉진 내후성 평가를 진행하였다.

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.97-102
• /
• 2002

A series of waterbome poly(urethane-urea) anionomers were prepared from isophorone diisocyanate (IPDI), polycaprolactone diol (PCL), dimethylol propionic acid (DMPA), ethylene diamine (EDA), and triethylamine (TEA), NaOH, or Cu($(COOCH_3)_2$) as neutralizing agent. This study was performed to decide the effect of neutralizing agent type on the particle size viscosity, hydrogen bonding index, adhesive strength, antistaticity, antibacterial and mechanical properties. The particle size of the dispersions decreased in the following order: TEA based samples (T-sample), NaOH based samples (N-sample), and Cu($(COOCH_3)_2$) based sample (C-sample). The viscosity of the dispersions increased in the order of C-sample, N-sample, and T-sample. Metal salt based film samples Of and C-sample) had much higher antistaticity than TEA based sample. By infrared spectroscopy, it was found that the hydrogen bonding index (or fraction) of samples decreased in the order of T-sam-pie, N-sample, and C-sample. The adhesive strength and tensile modulus/strength decreased in the order of T-sample, N-sam-pie, and C-sample. The C-sample had strong antibacterial halo, however, T- and N-samples did not

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1997년도 추계총회 및 학술발표회 논문집
• /
• pp.135-139
• /
• 1997

• Elastomers and Composites
• /
• 제53권2호
• /
• pp.86-94
• /
• 2018

The effect of the NCO index and catalyst type on the thermal stability of poly(urethane-isocyanurate) (PUIR) foams was investigated to identify a method for enhancing the flame resistance of PUIR. PUIR foams were prepared using 4,4-diphenylmethane diisocyanate (MDI) and [(diethylene glycol)adipate]diol, which were synthesized by esterification of adipic acid and diethylene glycol. Dabco K-15, Dabco TMR-30, and Toyocat RX-5 were used as the catalysts for trimerization and gelation. The amount of urea and isocyanurate groups in PUIR was semi-quantitatively determined by normalizing their absorbance with the phenyl absorbance measured by FT-IR. The normalization data showed that Dabco TMR-30 effectively generated isocyanurate groups in PUIR. As a result, Dabco TMR-30 effectively raised the decomposition temperature and increased the 800 K and 900 K residues of the PUIR foam synthesized with an NCO index of 200.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 추계 총회 및 학술발표회
• /
• pp.93-95
• /
• 2002

No Abstract, See Full Text

• Macromolecular Research
• /
• 제9권4호
• /
• pp.197-205
• /
• 2001

Platelet adhesion onto elastic polymeric biomaterials was tested in vitro by perfusing human whole blood at a shear rate of 100 sec$\^$-1/ for possible verification of mechanisms of initial platelet adhesion perfusion of blood on the polymeric substrates was performed after treatments either with or without pre-adsorption of 1% blood plasma, and either with or without residence of the protein-preadsorbed substrate in phosphate buffered solution. The surfaces employed were elastic polymers such as poly(ether urethane urea), poly(ether urethane), silicone urethane copolymer, silicone rubber and poly(ether urethane) with the anti-calcifying agent hydroxyethane bisphosphate. Each polymer surface treated was exposed in vitro to the dynamic, heparinized whole blood perfused for upto 6 min and the surface area of platelets initially adhered was measured by employing in situ epifluorescence video microscopy. The blood perfusion was performed on the surfaces treated at the following three different conditions: directly on the bare surfaces, after protein pre-adsorption and after residence in buffer for 3 days of the surfaces protein pre-adsorbed for 2 h. The effects of blood plasma pre-adsorption on the initial platelet adhesion was surface-dependent. The amount of the adsorbed fibrinogen and the surface coverage area of the adhered platelets were dependent on the surface conditions whether substrates were bare surfaces or protein pre-adsorbed ones. To test an effect of possible morphological (re)orientations of the adsorbed proteins on the initial platelet adhesion, the polymeric substrate pre-adsorbed with 1% blood plasma was immersed in phosphate buffered solution for 3 days and then exposed to physiological blood perfusion. The surface area of the platelets adhered on these surfaces was significantly different from that of the surfaces treated with protein pre-adsorption only. These results indicated that platelet adhesion was dependent on the surface property itself and pre-treatment conditions such as blood perfusion without any pre-adsorption of proteins, and blood perfusion either after protein pre-adsorption or after subsequent substrate residence in buffer of the substrate pre-adsorbed with proteins. Understanding of these results may guide for better designs of blood-contacting materials based on protein behaviors.

• 보존과학회지
• /
• 제34권1호
• /
• pp.23-29
• /
• 2018

도자기 복원을 위한 폴리우레아를 합성하여 메움제로 제조한 후 이를 도자기 보존 처리과정에 필요한 성형에 적용하였다. 합성된 폴리우레아는 이액 반응형 경화 재료로 경화되는 과정에서 수축이 없고 무황변 소재로 제조되었다. $180kg/cm^2$의 접착 강도와 $200kg/cm^2$의 전단 강도를 비교하여 볼 때, 기존의 시판 에폭시 퍼티의 수준으로 제조되었으며, 구조상 유사 형태인 우레탄 복원제의 문제점으로 지적되었던 기포가 발생하지 않았으며 경화 시간과 가사 시간도 첨가되는 반응 촉매의 량에 따라 조절할 수 있었다. 현대 유물 복원에 사용된 조성의 폴리우레아의 경우 가사 시간 약 1 시간, 완전 경화 시간 ($T_{90}$) 12 시간 정도를 나타내고 있었으며 $2{\times}2{\times}2cm$ 크기의 시편을 xylene에 첨가하였을 때 약 2 시간 후에서부터 분리가 시작되어 24 시간 후에는 용액 내에서 완전 분말화가 이루어져서 가역성을 나타내고 있었고 이를 직접 현대 유물에 적용하여 복원 가능성과 편리성, 채색성 등을 나타내는 것을 확인하였다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.63-64
• /
• 2009

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술대회지
• /
• pp.77-81
• /
• 2004

The massive structures are not free to move with vibration, differential settlement, thermal stresses because, construction and expansion joint, crack etc., can be large enough to cause leakage as deformation of waterproofing. It has been depended on the test method of tensile/tear strength which is waterproofing performance as behavior of concrete structure crack. However, not to practically confirm the creep applied to concrete surface, even waterproofing membrane have more performance than definite strength and elasticity. Therefore, in this study will focus on the test method to consider a resistance performance about loose adhesion and deformation of waterproofing and behavior of concrete structure as construction/expansion joint, crack. Performance test method on the influence as behavior of concrete structure crack is to choose waterproofing materials and construction method which possible to confront with behavior of 50mm crack in the atmosphere and low temperature. Examine the deformation of waterproofing membrane and loose adhesion which can occur to structure in general job site, suggest standard testing method to analyze correlation waterproofing membrane and structure with 5-types of materials used in this study, such as Adhesion membrane and sheet complex, sheet and urethane complex, self-adhesive sheet, spray poly-urea, spray membrane of rubberized Asphalt.