• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.87-89
• /
• 2003

Thermoplastic polyurethane(PU)-based blend membranes were prepared by the solvent evaporation process. The gas sorption, diffusion, and permeation properties of PU-based blend membranes have been studied. The morphology of PU-based blend membranes was investigated by SEM. The result showed that phase separation occurred with increasing blend ratio. $CO_2$ permeation behaviors of blend membranes were affect by blend composition. Thermoplastic polyurethane(PU)-based membranes showed high $CO_2$ permeation and $CO_2$/$N_2$ selectivity of the blend membrane was improved with increasing the blend ratio.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.575-579
• /
• 2002

Two-dimensionally cross-linked ultrathin films of poly(maleic acid-alt-methyl vinyl ether) (MA-MVE) and poly(allylamine) (PAA) were produced by using sodium dioctadecyl sulfate (2C18S) as the monolayer template for Langmuir-Blodgett (LB) depositio n. The template molecules were subsequently removed by thermal treatment followed by extraction. The polyion-complexed monolayers of three components, i.e., template 2C18S, co-spread PAA, and subphase MA-MVE, were formed at the air-water interface. Their monolayer properties were studied by the surface pressure-area isotherm. The monolayers were transferred on solid substrates as Y type. The polyion-complexed LB films and the resulting network films were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The cross-linking to form a polymer network was achieved by amide or imide formation through heat treatment under a vacuum. SEM observation of the film on a porous fluorocarbon membrane filter (pore diameter 0.1 ㎛) showed covering of the pores by four layers in the polyion complex state. Extraction by chloroform followed by heat treatment produced hole defects in the film.

• 공업화학
• /
• 제17권3호
• /
• pp.331-334
• /
• 2006

본 연구에서는 포집부의 재질과 포집장치를 개선하여 배향성이 존재하는 극세섬유를 제조하였다. 방사용액은 polyamide-polyimide copolymer (PAI)를 사용하였다. 포집부의 재질을 변화하고 동일한 전압을 가하여 제조된 극세섬유의 형태를 비교하였다. 한편, 물 포집부와 회수장치로 구성된 장치를 통하여 극세섬유를 제조하고 SEM을 통하여 관찰하였다. 실험결과, 동일한 전압으로 제조된 섬유의 평균직경은 포집부의 재질과 회수방식에 영향을 받지 않았으나 포집부의 재질과 회수방법에 따라 섬유의 형태가 변화하는 것이 관찰되었다. 포집부에 누적시켜 제조된 극세섬유는 배향성이 존재하지 않는 그물형 구조인데 반하여, 별도의 회수장치를 통하여 연속적으로 회수된 극세섬유는 배향성이 존재함을 확인하였다. 이는 물 포집부가 섬유의 유도, 임시집적, 섬유와의 마찰 그리고 이동경로 역할을 하였고, 회수장치는 속도 조절을 통하여 물과 섬유간의 마찰을 제어함으로써 연속적인 회수가 가능한 것으로 판단된다.