• Korean Journal of Plant Resources
• /
• v.14 no.2
• /
• pp.102-107
• /
• 2001

This study was carried out to explore for the possibility of recycling the pine wood sawdusts for the substrate for enokitake (Flammulina velutipes) cultivation. The wood species of sawdusts cultivated for enokitake mushroom were identified mostly as hard pine (Pinus spp.). Distribution of enokitake hyphae was restricted to ray parenchymas and tracheids exposed to fungi. Nevertheless, degree of cell wall degradation by enokitake was slight. Light microscopic observation showed the thinning of secondary cell wall in some tracheids. Under polarized microscopy the 1()ss of birefringence was observed only in a few latewood tracheids. All the middle lamella remained intact. The present work showed clearly that pine sawdusts used as substrate for enokitake cultivation held enough cell wall materials for mushroom cultivation. The relative resistance of softwood cell walls against enokitake fungus was also discussed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.137-146
• /
• 1995

Twenty(20) large commercial buildings located in Seoul with friable sprayed-on surface insulation material on ceilings were investigated for asbestos content in bulk material by polarized light microscopy and for airborne fiber concentrations in buildings by phase contrast microscopy. In addition, such building-related variables as building age, numbers of traffic, airflow, surface conditions of the ceiling, temperature, and humidity were studied for any correlation with airborne fiber concentrations. The results were as follows: 1. Chrysotile asbestos was found in two bulk samples with 3-5% content and with <1%in one sample out of total 20 bulk samples collected. Glass fiber and mineral wool were the two major constituents of the bulk samples. 2. The ceiling surfaces were very friable in 16 buildings and were relatively hard in 4 buildings. The friability of the surface material was dependent upon the type and the amount of binder that had been mixed with the sprayed-on surface material. 3. Airborne fiber concentrations were log-normally distributed and the geometric mean(geometric standard deviation) fiber concentrations in the underground parking lots, inside buildings, and outdoor ambient air were 0.0063(1.97)f/cc, 0.0068(2.29)f/cc, and 0.0033(2.36)f/cc, respectively. 4. No significant relationship of airborne fiber concentrations and all building-related variables studied except humidity was found. The results of this study suggest that the sprayed-on surface insulation material found in some commercial buildings may possibly be contaminated with asbestos. Since most of the ceiling surfaces surveyed were very friable and poorly maintained and the airborne fiber concentrations were relatively high, there is a possibility of asbestos fiber contamination in these buildings, particularly at those buildings with asbestos-contaminated surface material. Since poorly maintained surface conditions were thought to be a source of high airborne fiber concentrations, there is a urgent need of a systematic operation and maintenance program. Further study of non-occupational asbestos exposure in general population utilizing advanced analytical technique such as transmission electron microscopy is highly recommended.

• Korean journal of communication and information
• /
• v.35
• /
• pp.181-210
• /
• 2006

This frame analysis attempts to shed light on the process by which the Korean press constructs crisis as social reality through a series of risk reporting on food safety. Based on the FSSI(Food Safety Sentiment Index) developed by KIHASA(Korea Institute for Health and Social Affairs), 11 cases of food safety reports from 1989 to 2005 were collected from the Korean Integrated News Database System(KINDS) and analyzed to yield the following salient features: risk diffusion frame; attribution of responsibility frame; conflict frame. It was observed that the press exhibited a tendency to approach the food safety incidents from a bi-polarized perspective, amplifying dichotomy between the victim and the perpetrator rather than treating them as scientific, or environmental hazards that require precise and synthesized information for resolution. This occupational habit of attributing status to agents of news was also found to contribute towards construction of crisis as social reality.

• Applied Biological Chemistry
• /
• v.30 no.3
• /
• pp.242-249
• /
• 1987

Physicochemical properties on heat-moisture treatment of sweet potato starch were investigated. Starch granules of sweet potato observed by photomicroscope, polarized-light microscope and scanning electron microscope were round and polygonal. X-ray diffraction pattern was changed from Ca-pattern to A-pattern upon heat-moisture treatment. Water binding capacity was drastically increased as the moisture level was increased. The swelling power and solubility at the same temperature were decreased by heat-moisture treatment. Transmittance of 0.1% starch suspensions was increased rapidly from $65^{\circ}C$ in case of untreated starch and from $70^{\circ}C$ in case of treated starch. The starch on heat-moisture treatment was gelatinized over higher temperature range than the untreated starch.

• Journal of Korean Society for Atmospheric Environment
• /
• v.9 no.3
• /
• pp.191-199
• /
• 1993

This paper describes the results of a systematic study to determine the characteristics of particle generated from various types of asbestos containing material(ACM) and manmade fiber material(MMFM) during operations of cutting and grinding in laboratory and workplace. Tests were conducted with a specially designed glove box which allowed complete sampling of the generated asbestos fibers. Specificially, air measurements were made during ACM and MMFM installation in building. All personal air samples collected were identified by polarized light microscopy(PLM), X-ray diffraction(XRD) and scanning electron microscope with energy dispersive X-ray analysis(SEM/EDXA). Also, the samples were counted by phase contrast microscope(PCM) in order to compare the results with the permissible exposure standard for workplace. Results indicate that the characterisitcs of fibers found in the roofing sheet, the ceiling and the wall insulation boards were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of asbestos, while the characteristics of fibers found in the ceiling insulation board, the floor tile and the sprayed on insulation products in parking area were identical to those of rock wool. The concentrations of airborne fibers from various building materials cut by a grinder for 5 minutes were in the ranges of 0.09 $\sim$ 1.71 fibers/cc(f/cc). The highest concentration(1.71f/cc) was found during grinding the wall insulation board which also contains rock wool. The airborne fiber concentrations generated by installing at workplace were ranged from 0.0009 to 0.029 f/cc. All asbestos fibers from the ceiling insulation board at workplace were less than 20$\mu$m in length and more than 20% of them had the average aspect ratio greater than 20. Therefore, for the purpose of decreasing asbestos and man-made fiber concentrations at the workplace, the ceiling and wall board should use strong binding material to increase the binding force with fiber. Also, the permissible exposure standard for workplace(2.0f/cc) in Korea should be constituted below the maximum avaiable concentration measured at glove box.

• Journal of Conservation Science
• /
• v.33 no.2
• /
• pp.61-73
• /
• 2017

In order to identify the application techniques of wooden lacquerware artifacts, optical/polarized light microscopy, Fourier transform infrared (FT-IR) spectroscopy, and scanning electron microscopy (SEM) equipped with energy dispersive X-ray analysis (EDX) were conducted on the lacquer films of 61 wooden lacquerware artifacts excavated from the Imdang-dong site, Gyeongsan, Korea. Powdered soil, soot, and charcoal were used as a filler for the undercoat, and iron oxide ($Fe_2O_3$) was used as a red pigment. Five different applying techniques were identified for the undercoat according to the composition of the lacquer. Eight different application techniques were identified for the final coat (on the middle layer and surface layer). Totally seventeen application techniques were identified based on the combination methods of the undercoat and finalcoat. Consequently, the undercoating techniques of Imdang-dong lacquerwares were found to be similar to those of lacquerwares from excavated in other provinces. However, the use of iron oxide as a red pigment at Gyeongsang province is very characteristic compared with others.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.533-538
• /
• 2001

The ZnSe sample grown by chemical bath deposition (CBD) method were annealed in Ar gas at 450$^{\circ}C$ Using extrapolation method of X-ray diffraction pattern, it was found to have zinc blend structure whose lattice parameter a$\_$o/ was 5.6687 ${\AA}$. From Hall effect, the mobility was likely to be decreased by impurity scattering at temperature range from 10 K to 150 K and by lattice scattering at temperature range from 150 K to 29 3K. The band gap given by the transmission edge changed from 2.7005 eV at 293 K to 2.8739 eV at 10 K. Comparing photocurrent peak position with transmission edge, we could find that photocurrent peaks due to excition electrons from valence band, $\Gamma$$\_$8/ and $\Gamma$$\_$7/ to conduction band $\Gamma$$\_$6/ were observed at photocurrent spectrum. From the photocurrent spectra by illumination of polarized light on the ZnSe thin film, we have found that values of spin orbit coupling splitting Δso is 0.0981 eV. From the PL spectra at 10 K, the peaks corresponding to free bound excitons and D-A pair and a broad emission band due to SA is identified. The binding energy of the free excitons are determined to be 0.0612 eV and the dissipation energy of the donor -bound exciton and acceptor-bound exciton to be 0.0172 eV, 0.0310 eV, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.281-287
• /
• 2002

The stochiometric composition of AgGaS$_2$ polycrystal source materials for the AgGaS$_2$/GaAs epilayer was prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns it was found that the polycrystal AgGaS$_2$ has tetragonal structure of which lattice constant a$\sub$0/ and c$\sub$0/ were 5.756 ${\AA}$ and 10.305 ${\AA}$, respectively. AgGaS$_2$/GaAs epilayer was deposited on throughly etched GaAs(100) substrate from mixed crystal AgGaS$_2$ by the Hot Wall Epitaxy (100) system. The source and substrate temperature were 590$^{\circ}C$ and 440$^{\circ}C$ respectively. The crystallinity of the grown AgGaS$_2$/GaAs epilayer was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for AgGaS$_2$/GaAs epilayer at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by ${\alpha}$ : 8.695${\times}$10$\^$-4/ eV/K, and ${\beta}$ = 332 K. From the photocurrent spectra by illumination of polarized light of the AgGaS$_2$/GaAs epilayer, we have found that crystal field splitting ΔCr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pain are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.

• Childhood Kidney Diseases
• /
• v.6 no.2
• /
• pp.243-250
• /
• 2002

Amyloidosis comprises a diverse group of systemic and local diseases characterized by organ involvement by the extracellular deposition of fibrils composed of subunits of a variety of normal serum proteins. Secondary amyloidosis is caused by the deposition of amyloid A(AA) protein in chronic inflammatory disease. Juvenile rheumatoid arthritis(JRA) has been known to be the most common cause of secondary amyloidosis. We experienced one case of secondary renal amyloidosis in a 12-year-old girl who had suffered from JRA for several years who had visited our renal clinic to evaluate the proteinuria with microscopic hematuria which was detected by chance at school urine screening examination. Apple green birefringence was observed under polarized light with Congo red stain at)d characteristic electron microscopic findings was also noted in renal tissues which was obtained by percutaneous renal biopsy. In our knowledge, this is the first case report of secondary renal amyloidosis developed in pediatric age in Korea.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.56-59
• /
• 2004

The stochiometric composition of $AgGaS_2$ polycrystal source materials for the $AgGaS_2/GaAs$ epilayer was prepared from horizontal furnace. From the extrapolation method of X-ray diffraction patterns it was found that the polycrystal $AgGaS_2$ has tetragonal structure of which lattice constant $a_0$ and $c_0$ were 5.756 ${\AA}$ and 10.305 ${\AA}$, respectively. $AgGaS_2/GaAs$ epilayer was deposited on throughly etched GaAs (100) substrate from mixed crystal $AgGaS_2$ by the Hot Wall Epitaxy (HWE) system. The source and substrate temperature were $590^{\circ}C$ and $440^{\circ}C$ respectively. The crystallinity of the grown $AgGaS_2/GaAs$ epilayer was investigated by the DCRC (double crystal X-ray diffraction rocking curve). The optical energy gaps were found to be 2.61 eV for $AgGaS_2/GaAs$ epilayer at room temperature. The temperature dependence of the photocurrent peak energy is well explained by the Varshni equation, then the constants in the Varshni equation are given by ${\alpha}=8.695{\times}10^{-4}eV/K$, and $\beta$=332 K. From the photocurrent spectra by illumination of polarized light of the $AgGaS_2/GaAs$ epilayer, we have found that crystal field splitting $\Delta$ Cr was 0.28 eV at 20 K. From the PL spectra at 20 K, the peaks corresponding to free and bound excitons and a broad emission band due to D-A pairs are identified. The binding energy of the free excitons are determined to be 0.2676 eV and 0.2430 eV and the dissociation energy of the bound excitons to be 0.4695 eV.