• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.55-65
• /
• 2014

Radar remote sensing is appropriate for rice monitoring because the areas where this crop is cultivated are often cloudy and rainy. Especially, Synthetic Aperture Radar (SAR) can acquire remote sensing information with a high temporal resolution in tropical and subtropical regions due to its all-weather capability. This paper analyzes the relationships between backscattering coefficients of rice measured by RADARSAT-2 SAR and growth parameters during a rice growth period. And we applied the relationships to crop monitoring of paddy rice in North Korea. As a result, plant height and Leaf Area Index (LAI) increased until Day Of Year (DOY) 234 and then decreased, while fresh weight and dry weight increased until DOY 253. Correlation coefficients revealed that Horizontal transmit and Horizontal receive polarization (HH)-polarization backscattering coefficients were correlated highly with plant height (r=0.95), fresh weight (r=0.92), vegetation water content (r=0.91), LAI (r=0.90), and dry weight (r=0.89). Based on the observed relationships between backscattering coefficients and variables of cultivation, prediction equations were developed using the HH-polarization backscattering coefficients. Concerning the evaluation for the applicability of the LAI distribution from RADARSAT-2, the LAI statistic was evaluated in comparison with LAI distribution from RapidEye image. And LAI distributions in Pyongyang were presented to show spatial variability for unaccessible areas.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.981-987
• /
• 2016

We present a cost-effective dual polarization quadrature phase-shift coherent receiver module using a silica planar lightwave circuit (PLC) hybrid assembly. Two polarization beam splitters and two $90^{\circ}$ optical hybrids are monolithically integrated in one silica PLC chip with an index contrast of $2%-{\Delta}$. Two four-channel spot-size converter integrated waveguide-photodetector (PD) arrays are bonded on PD carriers for transverse-electric/transverse-magnetic polarization, and butt-coupled to a polished facet of the PLC using a simple chip-to-chip bonding method. Instead of a ceramic sub-mount, a low-cost printed circuit board is applied in the module. A stepped CuW block is used to dissipate the heat generated from trans-impedance amplifiers and to vertically align RF transmission lines. The fabricated coherent receiver shows a 3-dB bandwidth of 26 GHz and a common mode rejection ratio of 16 dB at 22 GHz for a local oscillator optical input. A bit error rate of $8.3{\times}10^{-11}$ is achieved at a 112-Gbps back-to-back transmission with off-line digital signal processing.

• Journal of the Korean earth science society
• /
• v.45 no.4
• /
• pp.318-326
• /
• 2024

Black ice, a thin and nearly invisible ice layer on roads and pavements, poses a significant danger to drivers and pedestrians during winter due to its transparency. We propose an efficient black ice detection system and technique utilizing Global Positioning System (GPS)-reflected signals. This system consists of a GPS antenna and receiver configured to measure the power of GPS L1 band signal strength. The GPS receiver system was designed to measure the signal power of the Right-Handed Circular Polarization (RHCP) and Left-Handed Circular Polarization (LHCP) from direct and reflected signals using two GPS antennas. Field experiments for GPS LHCP and RHCP reflection measurements were conducted at two distinct sites. We present a Normalized Polarized Reflection Index (NPRI) as a methodological approach for determining the presence of black ice on road surfaces. The field experiments at both sites successfully detected black ice on asphalt roads, indicated by NPRI values greater than -0.1 for elevation angles between 45° and 55°. Our findings demonstrate the potential of the proposed GPS-based system as a cost-effective and scalable solution for large-scale black ice detection, significantly enhancing road safety in cold climates. The scientific significance of this study lies in its novel application of GPS reflection signals for environmental monitoring, offering a new approach that can be integrated into existing GPS infrastructure to detect widespread black ice in real-time.

• Journal of the Optical Society of Korea
• /
• v.8 no.2
• /
• pp.83-89
• /
• 2004

A variable optical attenuator with a bending-sensitive fiber (BSF) that can be used in optical networks is developed. The refractive index profile of the BSF is divided into four regions which are inner core, center dip of inner core, outer core and clad. The 3-dimensional finite difference beam propagation method (3D FD-BPM) is utilized to find the characteristics of the BSF, so the mode profile of the BSF and optical power attenuation according to the bending are investigated, and the equivalent model of the BSF is made. By using this equivalent model of the BSF, the BSF is fabricated, and the refractive index profile of the BSF is measured, which is similar to refractive index profile of the proposed BSF. The fabricated variable optical fiber attenuator (VOFA) consists of the BSF in a rectangular rubber ring with a fixed bend radius (BR) in a steady state. The VOFA using the proposed BSF was able to attenuate the optical power by more than about －38 ㏈ at certain wavelengths (1540∼1560 nm) based on adjusting the mechanical pressure applied to the upper surface of the rectangular rubber ring with the bent BSF. In addition, the proposed VOFA produced an insertion loss of 0.68 ㏈, polarization dependent loss (PDL) of about 0.5 ㏈, and return loss of less than －60 ㏈.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.9
• /
• pp.50-55
• /
• 1999

In this paper we proposed a variable optical attenuator using the side polished fiber coupled with a refractive index matching liquid. Small variation of refractive index of matching liquid can induce very large change of optical loss due to the coupling between the fiber mode and radiation mode. The thermo-optic effect of matching liquid was used to ontrol the optical attenuation. The side polished fiber block was fabricated using the silicon V gloove. Experimental results showed that $5^{\circ}C$ temperature variation was enough to adjust full range attenuation. The polarization dependent loss and insertion loss of the fabricated devices were 0.5dB and 0.2dB respectively.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.1
• /
• pp.1-12
• /
• 2014

Living environments in rural area have become deteriorated rapidly. Increase of aging population, decline in agricultural income, polarization of wealth in rural community due to rural returners have caused severe decline and imbalance of living environments in rural area. Responding to this circumstances, governments currently develop projects for improving living environments focusing on individual housing which were excluded from governmental supports because those had been regarded as private property. Nevertheless, there are still some gaps and problems in evaluating the quality of living environment and suggesting effective solutions. It would be because standards and guidelines of the projects have been based on urban housing system. In order to support the implementation of the projects, this research has developed an index for evaluating and monitoring the quality of living environments in rural area. By applying Delphi method, the index has been created in four categories of 'security', 'convenience', 'comfortability', and 'durability' 'Security' consists of structural safety, crime, disaster, accident prevention. 'Convenience' includes three divisions of living, traffic, farm working. 'Comfortability' is divided into sanitation, indoor environments, and aesthetic appreciation. Lastly, 'durability' has four divisions of energy conservation, environmental friendliness, efficiency, and economics. Each sub-division also has different items from three to twelves. In the case of an index for performance evaluation, items have been derived from energy conservation(6-items), and environmental friendliness(7-items). Items developed as an index for evaluating rural living environments in this research might be good background information for remodeling project in rural housing development.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.129-143
• /
• 2014

The purpose of this study is to evaluate the availability of dual-polarization radar rain for flood routing in Chungju Dam watershed($6,625.8km^2$) using KIMSTORM (Grid-based KIneMatic wave STOrm Runoff Model). The Sobaek dual-polarization radar data for 1 heavy rain and 3 typhoon(Khanun, Bolaven, and Sanba) events in 2012 were obtained from Han River Flood Control Office. The spatio-temporal patterns between the two data were similar showing the ratio of radar rain to ground rain with 0.97. The KIMSTORM was set to $500{\times}500m$ resolution and a total of 45,738 cells(198 rows${\times}$231 columns) for the watershed. For radar rain and 41 ground rains, the model was independently calibrated using discharge data at 3 streamflow gauging stations(YW1, YC, and CJD) with coefficient of determination($R^2$), Nash and Sutcliffe Model Efficiency(ME), and Volume Conservation Index(VCI). The $R^2$, ME, and VCI 0.80, 0.62 and 1.08 for radar rain and 0.83, 0.68 and 1.10 for ground rain respectively.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.151-167
• /
• 2015

Korean movie maintain their market share from the highest 59.7% to the lowest 42.1% during the last ten years in Korea. However, with the multiplex and wide release strategy, the monopolies of four major distribution companies and three multiplex chain, the polarization of Korean movie's Box Office performance is deepening. With Gini-Index, concentration of film admission has been deepened in intensity from 0.53 in 2004 to 0.85 in 2014. Using Thomas Piketty's method, Movie attendance proportion of Highest 10% of the box office ranking for 2014 sharply increased to 71.2% from 30.28% in 2004 and the lowest 50% of box office ranking dropped from 11.03% in 2004 to 0.08% in 2014. Concentrations of the number of Screen, Screening, the seating Capacity have the same analogy with the polarization of film admission. However, concentration of seating share has maintained a modest increase from 0.22 in 2004 to 0.38 in 2014. This analysis shows that polarization of Korean movie box office performance is not the sole result of Natural selection of market but the result of the monopolies of distribution companies and Multiplex chains.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.178-181
• /
• 2005

Silicon oxynitride (SiON) layers deposited upon a $SiO_2/Si$ buffer layer placed upon silicon wafers have been obtained by using PECVD from $SiH_4,\;N_2O$, and $N_2$. It can be seen that the refractive index, measured by using a prism coupler, for the SiON films can be varied between 1.4480 and 1.4958 at a wavelength of 1552 nm by changing the process parameters. Optical planar waveguides with a thickness of $6{\mu}m$ and a refractive index contrast ($\Delta$n) of $0.36\% have been deposited. Also, etching experiments were performed using ICP dry etching equipment on thick SiON films grown onto Si substrates covered by a thick $SiO_2$ buffer layer. A polarization maintaining single-mode fiber was used for the input and a microscope objective for the output at $1.55{\mu}m$. As a result, a low index contrast SiON based waveguide is fabricated with easily adjustable refractive index of core layer. It illustrates that the output intensity mode is a waveguiding single-mode.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.156-161
• /
• 1998

We developed aerosol flame deposition method and made stress-free Pyrex-based optical waveguide on silicon substrate using this method. Zr is doped to control the refractive index of Pyrex waveguide layers. The refractive index of the film changes from 1.460 to 1.475 as the content of Zr changes from 0 to 3 wt%. Er is doped to see the possibility of applying this Pyrex waveguide as PLC-type (Planar Lightwave Circuit) optical amplifier. The refractive index of the film changes from 1.460 to 1.465 as the content of Zr changes from 0 to 1 wt%. Light launching using a prism coupler to the fabricated waveguide showed good quality for application to PLC. The polarization dependence of refractive-index of the Pyrex film is measured to be less than $2{\times}10^{-4}$.