• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.354-359
• /
• 2003

The microwave dielectric characteristics of (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ (0$\leq$x$\leq$1.0) ceramics were investigated by crystalstructure, variations of ionic polarizability, and microstructures. As x increased, (1-x)(Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)O$_2$-x(Mg$\_$1/3/Ta$\_$2/3/)O$_2$ transformed to tetragonal structure. Because the ionic radius of (Mg$\_$1/3/Ta$\_$2/3/)$\^$4+/was slightly bigger than one of (Al$\_$$\frac{1}{2}$/Ta$\_$$\frac{1}{2}$/)$\^$4+/, the cell parameters increased with increase of (Mg$\_$1/3/Ta$\_$2/3/)O$_2$concentration and coincided with prediction of the molecular additivity rule. As x increased, the compositions revealed ordered phase and were of single phase above 60 mol%. The increase of the ordered phase and grain size enhanced the Q and when ordering was completed at x over 0.6, the grain size was major factor for the increase in the a. Though the grain size increased, however, the porosity deteriorated the q. Therefore, the a depended on the order/disorder, the porosity, and the grain size in regular order.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.280-284
• /
• 2003

To develope of diagnosis and estimation system for utility of fungicides and insecticides as crop protection agents, various 10 physicochemical parameters, hydrophobicity (LogP), dipole moment (DM), HOMO energy, LUMO energy, molar refractivity $(MR:\;cm^3/mol)$, polarizability $(Pol:\;A^3)$, van der Waals molecular surface area $(A^2)$, van der Waals molecular volume $(Vol:\;cm^3)$, molecular weight (amu), hydration energy (Kcal/mol) for the active ingredients of 133 fungicides and 152 insecticides were calculated. And then the distribution ranges for each of the physicochemical parameters in fungicides, sterol biosynthesis inhibitors (DMI: demethylation inhibitor), insecticides and acetylcholine esterase inhibitors (AChE) were confirmed. It is suggested that the various compounds based on the range of the physicochemical parametes could be predicted for possibilities as fungicides and insecticides.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.9
• /
• pp.685-692
• /
• 2018

Using Babinet's principle and generalized sheet transition conditions(GSTCs), an analysis method for metascreens is proposed. First, the relation of a complementary screen between a metafilm and metascreen with the same dimensions was confirmed using Babinet's principle. These properties were verified by comparing the reflection coefficient of the patch and the transmission coefficient of the mesh. The patch and mesh are the basic structures of metafilms and metascreens, respectively. Based on these findings, it is also confirmed that the reflection coefficient of the patch surface calculated by GSTCs has the same value as the transmission coefficient of the mesh surface. It is expected that the proposed analysis methods can be applied to the magnitude, phase, and polarization of electromagnetic waves in the various unit structures of a given metasurface.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.85-93
• /
• 1988

Solvolyses of t-butylhalides (X = Cl, Br, I) in quasi isodielectric solvent system, MeOH-nitromethane, MeOH-nitrobenzene and MeOH-ethyleneglycol have been studied kinetically. Methanolyses for t-butylhalides in MeOH-NM and MeOH-NB show rate maxima at 40~100 % (v/v) MeOH. The rate maxima observed have been interpreted as a result of cooperative enhancement of polarity-polarizability and hydrogen bonddonor ability of solvents. The influences of polarity-polarizability and hydrogen bonddonor ability on reactivities of substrates have been discussed in terms of Y value changes. The solvolysis rates for t-butylhalides in E.G. are more than 20 fold faster than those in MeOH and this was attributed to the solvent structure of E.G.

• Journal of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.45-51
• /
• 1985

Rate constants and activation parameters for the methanolysis of t-butyl halide (t-BuCl, t-BuBr, t-BuI) in various MeOH-DMSO mixtures were measured by conductometric method. Taft's solvatochromic parameters, such as polarity-polarizability(SPP's), ${\pi}^{\ast}$, hydrogen bond donor (HBD) acidity, ${\alpha}$, and hydrogen bond acceptor (HBA) basicity, ${\beta}$ of the solvents, were determined by the so called solvatochromic method using five indicators. The variation of methanolysis rate with the solvent composition was discussed on the basis of the activation parameters and the correlation of the rates with the solvatochromic parameters. It is concluded that the polarity-polarizability, HBD acidity and HBA basicity of the mixtures had an effect on the ionization of t-butyl halide cooperatively, also that the specific interaction between the leaving groups and the solvents, such as ion-dipole and hydrogen bond acceptor-donor interaction, is the most important factor of solvent effects on the stabilization of transition states.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.152-156
• /
• 2000

The effect of cupric ion concentration on the throwing power has been studied in the electrodeposition of Cu on the porous reticular electrodes with the electrolytes of $CuSO_4\;and\;H_2SO_4$. Sulfuric acid electrolytes with lower concentration of $CuSO_4$ improved throwing power in electrodeposition of copper not only due to higher cathodic polarizability but also due to higher conductivity of the electrolytes. The increase in conductivity of the electrolytes at low concentration of $CuSO_4$ could be also illustrated by the decrease in viscosity of the electrolytes. It was found that both the throwing power and the limiting current density should be taken into account in the electrodeposition of Cu on the reticular electrodes. According to the experimental results, the electrolyte of 0.2M $CuSO_4$ and 0.5M $H_2SO_4$ was found to be the most appropriate condition at the current density of $10mA/cm^2$.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.214-218
• /
• 2009

Second-order rate constants ($k_N$) have been measured for nucleophilic substitution reactions of S-4-nitrophenyl thiobenzoate with a series of alicyclic secondary amines in $H_2O$ containing 20 mol % DMSO at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. The Br$\phi$nsted-type plot exhibits a downward curvature, i.e., $\beta_{nuc}$ decreases from 0.94 to 0.34 as the amine basicity increases. The reactions in the aqueous DMSO have also been suggested to proceed through a zwitterionic tetrahedral intermediate (T${\pm}$) with change in the RDS on the basis of the curved Br$\phi$nsted-type plot. The reactions in the aqueous DMSO exhibit larger $k_N$ values than those in the aqueous EtOH. The macroscopic rate constants ($k_N$) for the reactions in the two solvent systems have been dissected into the microscopic rate constants ($k_1\;and\;k_2/k_{-1}$ ratio) to investigate effect of medium on reactivity in the microscopic level. It has been found that the $k_2/k_{-1}$ ratios are similar for the reactions in the two solvent systems, while $k_1$ values are larger for the reactions in 20 mol % DMSO than for those in 44 wt % EtOH, indicating that the larger $k_1$ is mainly responsible for the larger $k_N$. It has been suggested that the transition state is more stabilized in 20 mol % DMSO through mutual polarizability interaction than in 44 wt % EtOH through H-bonding interaction.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.345-346
• /
• 2002

The electrical and rheological properties of a chitosan malonate suspension in silicone oil was investigated by varying the electric fields, volume fractions of particles, and shear rates, respectively. The chitosan malonate susepnsion showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of multiple chains upon application of an electric field. The shear stress for the suspension exhibited a linear dependence on the volume fraction and an electric field power of 1.88. On the basis of the results, the newly synthesized chitosan malonate suspension was found to be an anhydrous ER fluid.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.1391-1396
• /
• 2014

In the present study, ten metal free non-linear optical (NLO) compounds have been designed. These compounds have designed by structural modification of (2-cyano-5-(4-(phenyl(4-vinylphenyl)amino)phenyl) penta-2,4-dienoic acid (TC4). Density functional theory was used for structure optimization and determination of photo-physical properties. These compounds contain triphenylamine as electron-donor and cyanoacrylic acid as acceptor. Five ${\pi}$-spacers are used to connect the donor and acceptor. Two auxiliary donors are also used to assist the donor. Results of this study indicate that stronger electron-donating auxiliary groups and longer ${\pi}$-conjugation enhance NLO response. Major absorption peaks of all systems were in the visible region. These absorption peaks are associated with the ${\pi}-{\pi}^*$ transitions of the entire molecule. From calculations it is clear that all system will be good NLO material. The present calculations will provide new ways for experimentalists to synthesize high-performance NLO material.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1046-1050
• /
• 2004

Six physical properties (enthalpy, density, decomposition temperature, solubility in water, pKa values, and hydronium potential) were examined by molecular modeling techniques. The molecular connectivity index, Wiener distance index, and Ad hoc descriptor are employed as structural parameters to encode information about branching, size, cyclization, unsaturation, heteroatom content, and polarizability. This paper examines the correlation of the molecular modeling techniques parameters and the physicochemical properties of amino acids. As a results, calculated values were in agreement with experimental data in the above six physical properties of amino acids and the molecular connectivity index was superior to the other indices in fitting the calculated data.