• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.

• 천문학회보
• /
• 제39권1호
• /
• pp.84.2-84.2
• /
• 2014

The intermediate polar V1323 Her = RXS J180340.0+401214 returned from its faint state 19.4-20.5 mag (mean brightness during the run, the instrumental system close to R or clear filter) (vsnet-alert 16958). On March 1, 2014, the brightness was 17.50 (clear filter) and next night 17.8 (R). During previous observations on January 24, the object was 19.6. We reported this findings to vsnet-alert 16958 and to The Astronomer's Telegramm (ATel #5944). The characteristics of the runs obtained before/after a switch between the high and low states will be presented.

• 한국산업보건학회지
• /
• 제7권1호
• /
• pp.3-18
• /
• 1997

This study was conducted to evaluate desorption efficiencies by types of desorption solvent for polar and non-polar organic compounds collected on activated charcoal tubes. Analytes tested were toluene, m-xylene, isobutyl alcohol, n-butyl alcohol, cellosolve acetate, and butyl cellosolve. Three different concentration levels of spiked sample were made. Types of cosolvent mixed with the main solvent, $CS_2$, were methanol, pentanol, and dimethylformamide (DMF) and the cosolvent for methylenechloride was methanol. The amounts of cosolvent added to the main solvent were 1, 5, and 10% by volume (v/v%), respectively. The results were as follows: 1. For all mixed solvents except 1% methanol and 1% pentanol with $CS_2$, desorption efficiency significantly increased, compared with that of $CS_2$ alone. 2. Desorption efficiency increased by increasing analyte loading on charcoal tube regardless of mixed solvents used and the material polarity. 3. For all cosolvents mixed with $CS_2$ by 1% and 5% volume, desorption efficiency for non-polar compound was significantly higher than that of polar compound. For the 10% mixed solvents and the methylenechloride mixed with methanol, the results were opposite. 4. The lowest mean percent bias of 4.79% was obtained from the 5% DMF-$CS_2$ mixed solvent, followed by 4.82% from the 10% DMF-$CS_2$ solvent while the highest bias of 23.26% was from the solvent of $CS_2$ alone. Based on the results of this study, in order to increase desorption efficiency, it is recommended to add such cosolvents as methanol, pentanol, and DMF to $CS_2$, preferably 5% by volume for analyzing polar compounds collected in charcoal tubes.

• Ocean and Polar Research
• /
• 제31권4호
• /
• pp.297-304
• /
• 2009

We investigated the response of the westerly winds over the Southern Ocean (SO) to glacial boundary conditions for the Last Glacial Maximum using the CCM3 atmospheric general circulation model. In response to glacial boundary conditions, the zonally averaged maximum SO westerly winds weakened 20-35% and were displaced toward the equator by 3-4 degrees. This weakening of the SO westerly winds arose from a substantial increase in mean sea level pressure (MSLP) in the southern part of the SO around Antarctica relative to the northern part. The increase in MSLP around Antarctica is associated with a marked temperature reduction caused by an increase in sea ice cover and ice albedo feedback during the glacial time. The weakened westerly winds in the SO and their equator-ward displacement might play a role in reducing the atmospheric $CO_2$ concentration by reducing upwelling of the carbon rich deep water during the glacial time.

• 대기
• /
• 제20권3호
• /
• pp.367-377
• /
• 2010

Variation of tracer distribution during the vortex-breakup period in the Antarctic region was observed by the data from the Improved Limb Atmospheric Spectrometer (ILAS) and ILAS-II. All four trace species including methane, nitrous oxide, ozone, and water vapor show similar patterns of vertical gradient in spite of different structures of zonal mean mixing ratio. Timings of vortex breakup on each level are estimated by two different methods, and they are compared with zonal standard deviations following the latitude circle of each trace species. Although the tracers have different chemical life times and sink/source, the zonal standard deviation patterns show remarkable similarities. The zonal standard deviation shown here to measure the zonal asymmetry of tracer distribution is believed to diagnose the timing of the Antarctic polar-vortex breakup reasonably well.

• Bulletin of the Korean Chemical Society
• /
• 제28권9호
• /
• pp.1477-1484
• /
• 2007

Artificial neural networks (ANNs), for a first time, were successfully developed for the prediction partial molar heat capacity of aqueous solutions at infinite dilution for various polar aromatic compounds over wide range of temperatures (303.55-623.20 K) and pressures (0.1-30.2 MPa). Two three-layered feed forward ANNs with back-propagation of error were generated using three (the heat capacity in T = 303.55 K and P = 0.1 MPa, temperature and pressure) and six parameters (four theoretical descriptors, temperature and pressure) as inputs and its output is partial molar heat capacity at infinite dilution. It was found that properly selected and trained neural networks could fairly represent dependence of the heat capacity on the molecular descriptors, temperature and pressure. Mean percentage deviations (MPD) for prediction set by the models are 4.755 and 4.642, respectively.

• 대한의용생체공학회:의공학회지
• /
• 제44권5호
• /
• pp.329-335
• /
• 2023

Perceived age is defined as age estimated based on physical appearance. Perceived age is an important indicator of the overall health status of the elderly. This is because people who appear older tend to have higher rates of morbidity and mortality than people of the same chronological age. Although perceived age is an important indicator, there is a lack of objective methods to quantify perceived age. In this paper, we construct a quantified perceived age model from face images using a convolutional neural network. The face images are enlarged to super-resolution and the skin, an important feature in perceived age, is made clear. Moreover, through Tanh-polar transformation, the central area of the face occupies a relatively larger area than the boundary area, helping the neural network better recognize facial skin features. The experimental results show mean absolute error (MAE) of 6.59, showing that the proposed model is superior to existing method.

• 멤브레인
• /
• 제25권1호
• /
• pp.32-41
• /
• 2015

용매 비용매 치환 상전이 공정과 증기 유도 상전이 공정을 결합하여 성능이 향상된 폴리술폰 정밀역과막을 제조하였다. 본 연구에서 제조된 비대칭막은 폴리술폰(고분자), 디메틸 포름아미드(용매), 폴리비닐리돈(친수성 고분자 첨가제), 폴리에틸렌글리콜(극성 고분자 액상 첨가제)로 이루어진 혼합 용액에 디메틸술폭사이드(극성 아프로틱 비용매), 물(극성 프로틱 비용매 첨가제)을 첨가하여 제막용 캐스팅 용액을 물과 이소프로판올 혼합용액에 침지하여 얻었다. 극성 아프로틱 비용매와 극성 프로틱 비용매의 첨가는 멤브레인의 구조를 제어하는데 유용한 방법이며 이를 습윤 공기를 캐스팅 용액에 노출시켜 준 응고상태를 만들어줌으로써 멤브레인의 내부 구조를 제어하고자 하였다. 또한 응고조의 조성을 물/이소프로판올의 혼합비를 통하여 조절하였다. 순수 투과도, 기공 크기 분포도, 표면 친수도 및 구조 분석이 이루어졌으며, 그 결과 평균 기공의 크기를 거의 $0.2{\mu}m$ 정도 향상시키는 효과를 가져왔으며 수 투과 유량 또한 1000-1800 LMH 정도 향상시키는 결과를 나타내었다.

• 천문학회보
• /
• 제34권1호
• /
• pp.91-91
• /
• 2009

• KSBB Journal
• /
• 제18권5호
• /
• pp.385-392
• /
• 2003

초임계 이산화탄소를 이용한 효율적인 DDS 설계를 위한 기초연구로서 순수한 초임계 이산화탄소와 초임계 이산화탄소와 상용성이 있으면서 고분자에 대해서는 비용매로 작용하는 극성 공용매로 변형된 초임계 이산화탄소를 이용하여 생체분해성 고분자인 L-PLA의 미세입자 형성에 대하여 고찰하였다. L-PLA용액의 농도가 증가할수록 입자 크기는 증가하였으며, 약 4%이상의 농도에서는 입자들 간의 강한 응집으로 인하여 입자의 형태가 구형에서 섬유상으로 변화하였다. 침전기 내 초임계 유체의 온도가 높아짐에 따라 생성된 입자의 크기가 증가하였으며, 온도가 높아질수록 입자의 분포는 불균일하게 나타났다. 용액 유량이 증가함에 따라 전체적으로 구형 입자의 생성이 증가하였으며, 입자의 평균 크기는 증가하는 것으로 나타났다. 순수한 초임계 이산화탄소를 사용한 경우 모든 실험 조건에서 입자 회수율은 약 30∼40% 정도로 나타났다. 입자 회수율을 향상시키기 위해 극성 공용매를 초임계 이산화탄소와 혼합하여 입자를 제조하였다. 메탄올과 에탄올을 이산화탄소 대비 몰비 0.5로 혼합한 경우 회수율은 각각 80%와 70%로 매우 높은 값을 나타냈으며, 평균 직경 1 $\mu\textrm{m}$이하의 매우 작은 입자를 제조할 수 있었다.