• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.40-48
• /
• 2013

Utilization of CCTV in crime prevention for public safety is accepted as the most effective measure in terms of crime prevention and control. Also, it is frequently used as a device that shows evidence of an unexpected situation or record on public social relationship. However, it is rare to find a study that qualitatively accessed the monitoring performance of a certain space depending on the choice and positioning of CCTVs. Thus, this study suggested a technology that can quantitatively compare and assess the monitoring performance of CCTVs depending on view angle and effective sight range of cameras as well as the monitoring performance depending on positioning measures. For the analysis, the concept of 3-dimensional surveillance field in the form of a frustum was suggested while deriving 3-dimensional range of sight and quantitative monitoring performance by applying Isovist theory. For the analysis technology, space of analysis subject, point of view (camera), and target point (measurement node) were installed at a 3-dimensional space and in use of ray-tracing algorithm, the line segment that was visually connected between the point of view and target point was extracted and accumulated. For such verification, analysis application was constructed and then applied to four alternative models on view angle and distance as well as four alternatives on positioning in order to verify its efficacy. Through the experiment, it was possible to compare and assess visibility depending on alternatives while quantifying the results by understanding the shadow areas beyond the monitoring range.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.478-484
• /
• 2014

본 논문에서는 Kinect Depth 카메라에서 손가락의 방향을 이용한 마우스 커서의 위치 선정에 관한 새로운 방법을 제안한다. 제안하는 방법은 손가락의 방향이 카메라를 향해 있을 경우는 거리변환을 이용한 손의 중점좌표를 이용한다. 손가락의 방향이 카메라를 향해 있지 않을 경우에는 손가락의 끝점 좌표를 이용한다. 손의 중점좌표는 전처리를 거친 영상의 거리변환 결과에서 가장 밝은 픽셀의 좌표를 이용하여 구한다. 손가락의 방향이 카메라를 향해 있을 경우에는 손가락의 끝점 좌표와 손의 중점 좌표 사이의 거리가 가까워지므로 중점좌표를 이용하여, 위치 선정의 정확도를 향상시킬 수 있게 된다. 손가락의 끝점 좌표는 손 영역만을 추출한 영상에서 팔 부분을 제거하여 영상의 중심에서 가장 멀리 떨어져있는 픽셀을 이용하여 구한다. 본 논문에서 제안하는 커서 위치 선정의 정확도를 측정하기 위해 임의의 5개의 기준 좌표를 선정하고 기준 좌표와 측정된 마우스 좌표사이의 오차를 500회 반복하여 측정하여 에러율을 측정한 결과, 평균 11 % 미만의 오차율을 나타내어 제안한 방법의 정확도를 확인할 수가 있었다.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권10호
• /
• pp.373-378
• /
• 2016

실내 위치 측위 관련 IPS(Indoor Positioning System)의 기술이 계속적인 연구 및 개발이 진행되고 있으며, 이에 따른 핑거프린팅 및 삼변 측량 기술이 지속적으로 연구되어 왔다. 하지만 이와 같은 기술은 AP(Access Point)를 이용하여 측위하기 때문에 광범위 측위에 있어 불안전한 RSSI 값의 측정으로 인한 측위 정밀도가 신용적이지 않다. 본 논문에서는 이와 같은 광범위 내 정밀 측위 문제점을 개선하고자 기존의 핑거프린팅 기법의 Cell 구성이 아닌 Sector 개념을 도입하였다. 각 Sector는 서로 간에 관여를 하지 않고 해당 Sector 내에서만 핑거프린팅 기법을 수행하여 효울 및 정밀성을 고려한 시스템을 제안하며, 기존의 핑거프린팅과 비교하여 효율성을 수학적 기법으로 입증하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.438-445
• /
• 2000

Positioning garlic cloves in upright standing in garlic field has been regarded as a very important job because it affects clove rooting, growing and, eventually, quality and yield in garlic production, Because of the geometrical uniqueness and irregularity of garlic cloves in shape, the planting operation has been conducted by manual work that needs a tremendous human labors and increases garlic production cost. The overall objective of this research was to develop garlic planting machine through investigating physical properties of garlic and designing clove upright positioning device after figuring out the factors affecting metering device and upright clove positioning mechanism. With the outcomes of the metering and posture positioning experiment, a garlic clove planter having twelve planting rows was developed for 37kW type tractor and feasibility test was carried out in the field. And, According to the performance test and cost analysis, the planter could accomplish planting operation of one hectare plot in 6.3 hours giving 48 times better efficiency, 6.3hrs/ha, and 74.2% of production cost reduction effect, 1,092,546won/ha, than the manual works of 299hrs/ha and 282,258won/ha. And, break-even point ofthe planter was calculated as of 2.71 hectares.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.13-22
• /
• 2010

In this paper, we propose a management system for positioning and indicating the surveyed control point using RFID and UMPC. This system is composed of digital control point, management system and application. The digital control point transmits information of the surveyed control point and the management system receives the data from the digital control points and manages the scattered digital control points. The system offers three services for managing the surveyed control point. The first service is control point monitoring service for identifying the change of location, locating the missing control point and the second service is control point search service notifying selected control point to user, and the third service is control point land management service for editing the control point information in the land. Therefore, this system makes it easy for administrators to access the control point information of the scattered surveyed control point through the country and enhances the managing efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.890-895
• /
• 1990

A theoretical and experimental study of a single link flexible arm a tip mass is presented for the translational end-point positioning. The problem of shifting the end-point from its initial position to the commanded position by the amount of W $_{d}$ is considered for the open loop control such that the base follows up the given path function. The theoretical results are obtained by applying the method of the Laplace transform to the governing equation, and the solution is calculated by the method of numerical inversion. Experimental results are obtained and compared with the theoretical ones.s.

• 한국멀티미디어학회논문지
• /
• 제20권1호
• /
• pp.74-81
• /
• 2017

In learning stage of the preliminary Cut-off indoor positioning scheme, RSSI and UUID data received from beacons at each reference point(RP) are stored in fingerprint map. The fingerprint map and real-time beacon information are compared to identify the nearest K reference points through which the user position is estimated. If the number of K is zero, this scheme cannot estimate user position. We have improved the preliminary Cut-off scheme to get the estimated user position even in the case. The improved scheme excludes the beacon of the weakest signal received by user mobile device and identifies neighborhood reference points using the other beacon information. This procedure are performed repetitively until K > 0. The simulation results confirm that the proposed scheme outperforms K-Nearest-Neighbor (KNN), Cluster KNN and the conventional Cut-off scheme in terms of accuracy while the constraints are guaranteed to be satisfied.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.209-214
• /
• 2019

Precise point positioning (PPP) requires precise orbit and clock products. International GNSS service (IGS) real-time service (RTS) data can be used in real-time for PPP, but it may not be possible to receive these corrections for a short time due to internet or hardware failure. In addition, the time required for IGS to combine RTS data from each analysis center results in a delay of about 30 seconds for the RTS data. Short-term orbit prediction can be possible because it includes the rate of correction, but the clock correction only provides bias. Thus, a short-term prediction model is needed to preidict RTS clock corrections. In this paper, we used a long short-term memory (LSTM) network to predict RTS clock correction for three minutes. The prediction accuracy of the LSTM was compared with that of the polynomial model. After applying the predicted clock corrections to the broadcast ephemeris, we performed PPP and analyzed the positioning accuracy. The LSTM network predicted the clock correction within 2 cm error, and the PPP accuracy is almost the same as received RTS data.

• Structural Engineering and Mechanics
• /
• 제89권6호
• /
• pp.589-599
• /
• 2024

This study presents the usability of the high-rate single-frequency Precise Point Positioning (SF-PPP) technique based on 20 Hz Global Positioning Systems (GPS)-only observations in detecting dynamic motions. SF-PPP solutions were obtained from post-mission and real-time GNSS corrections. These include the International GNSS Service (IGS)-Final, IGS real-time (RT), real-time MADOCA (Multi-GNSS Advanced Demonstration tool for Orbit and Clock Analysis), and real-time products from the Australian/New Zealand satellite-based augmentation systems (SBAS, known as SouthPAN). SF-PPP results were compared with LVDT (Linear Variable Differential Transformer) sensor and single-frequency relative positioning (SF-RP) solutions. The findings show that the SF-PPP technique successfully detects the harmonic motions, and the real-time products-based PPP solutions were as accurate as the final post-mission products. In the frequency domain, all GNSS-based methods evaluated in this contribution correctly detect the dominant frequency of short-term harmonic oscillations, while the differences in the amplitude values corresponding to the peak frequency do not exceed 1.1 mm. However, evaluations in the time domain show that SF-PPP needs high-pass filtering to detect accurate displacement since SF-PPP solutions include trends and low-frequency fluctuations, mainly due to atmospheric effects. Findings obtained in the time domain indicate that final, real-time, and MADOCA-based PPP results capture short-term dynamic behaviors with an accuracy ranging from 3.4 mm to 8.5 mm, and SBAS-based PPP solutions have several times higher RMSE values compared to other methods. However, after high-pass filtering, the accuracies obtained from PPP methods decreased to a few mm. The outcomes demonstrate the potential of the high-rate SF-PPP method to reliably monitor structural and earthquake-induced ground motions and vibration frequencies of structures.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.89-91
• /
• 1997

Conventional linear control schemes often fail to provide precise positioning of a control object under the influence of friction, deadzone, saturation, etc. This paper proposes a control scheme for a precise point-to-point positioning system, which behaves well even under the above influences. The proposed scheme is composed of a fuzzy-neural controller. The neural network is employed to improve the performance of the fuzzy logic. To illustrate the effectiveness of this scheme, experiments are carried out for the cases of a fuzzy controller, the proposed fuzzy-neural controller, and the results are compared with each other.