• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.33-39
• /
• 2014

Domestic and international researches, about intelligent systems based on a variety of location recognitions using location information, have actively proceeded. The representative location recognition method based on PTMP(Point To Multi Point) communication uses TOA(Time Of Arrival) to calculate distances to a fixed node that you want to recognize a position. The method is used to obtain the fixed node location information from three nodes location information that is applied by the triangulation method. There are disadvantages, an infrastructure should be established at a specific space and the system established cost is needed, in the location recognition method based on the PTMP communication, In this paper, the ranging based PTP(Point To Point) location recognition method is proposed to revise the disadvantage of PTMP location recognition method. And then it is compared with PTMP communication location recognition to evaluate performance. In this way, PTMP and PTP communication location recognition systems based on ranging were constructed and tested in an indoor environment. Experiment results show that the proposed PTP location recognition method could be confirmed to improve accuracy more than 3 times when it was compared with the existed PTMP location recognition method.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.71-77
• /
• 1996

This paper describes the development of on the machine measuring(OMM) system which can directlry measure the three dimensional machined dimensilnal accuracy using scanning probe in milling machine. Two algolithms, continuous path(CP) measurement using UC program and CAD data assisted point to point(PTP) measurement, were developed regarding specification of scanning probe. The OMM system was contructed to verify the developed system suing the proposed algorithm, and actually measured three kinds of machined TV shadow mask molds. The developed system was evaluated it's repeatability and compared with the current measurement system of CMM(Coording Measuring Machine) in terms of relative accuracy and time reduction and productivity increase.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.34-42
• /
• 1998

This paper describes an analysis of measuring error of on the machine measuring(OMM) system which directly measures machined surface dimensions using scanning probe on a CNC milling machine. 21 inch TV shadow mask mould clamped to a pallet was measured using PTP(point to point) measuring algorithm in OMM system and the results were compared with those using coordinate measuring machine(CMM). The OMM error was evaluated by probe error, stylus contact error, center shift error, repeatability, work-piece clamping error and etc. The results show that elastic deformation of the pallet is most affecting factor on the measuring error, thus pallet design and clamping method need very careful cosiderations.

• International Journal of Contents
• /
• v.10 no.4
• /
• pp.69-74
• /
• 2014

General location aware systems are only applied to indoor and outdoor environments using more than three transmitters to estimate a fixed object location. Those kinds of systems have environmental restrictions that require an already established infrastructure. To solve this problem, an Object Location Estimation (OLE) algorithm based on PTP (Point To Point) communication has been proposed. However, the problem with this method is that deduction of performance parameters is not enough and location estimation is very difficult because of unknown restriction conditions. From experimental tests in this research, we determined that the performance parameters for restriction conditions are a maximum transmission distance of CSS communication and an optimum moving distance interval between personal locations. In this paper, a system applied OLE algorithm based on PTP communication is implemented using a CSS (Chirp Spread Spectrum) communication module. A maximum transmission distance for CSS communication and an optimum moving distance interval between personal locations are then deducted and studied to estimate a fixed object location for generalization.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.2
• /
• pp.318-323
• /
• 2013

For fast and accurate motion of 6-axis articulated robot, more noble motion control strategy is needed. In general, the movement strategy of industrial robots can be divided into two kinds, PTP (Point to Point) and CP (Continuous Path). Recently, industrial robots which should be co-worked with machine tools are increasingly needed for performing various jobs, as well as simple handling or welding. Therefore, in order to cope with high-speed handling of the cooperation of industrial robots with machine tools or other devices, CP should be implemented so as to reduce vibration and noise, as well as decreasing operation time. This paper will realize CP motion (especially joint-linear) blending in 3-dimensional space for a 6-axis articulated (lab-manufactured) robot (called as "RS2") by using LabVIEW$^{(R)}$ (6) programming, based on a parametric interpolation. Another small contribution of this paper is the proposal of motion blending simulation technique based on Recurdyn$^{(R)}$ V7 and Solidworks$^{(R)}$, in order to figure out whether the joint-linear blending motion can generate the stable motion of robot in the sense of velocity magnitude at the end-effector of robot or not. In order to evaluate the performance of joint-linear motion blending, simple PTP (i.e., linear-linear) is also physically implemented on RS2. The implementation results of joint-linear motion blending and PTP are compared in terms of vibration magnitude and travel time by using the vibration testing equipment of Medallion of Zonic$^{(R)}$. It can be confirmed verified that the vibration peak of joint-linear motion blending has been reduced to 1/10, compared to that of PTP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.4 no.1
• /
• pp.38-42
• /
• 1979

This paper reports that a DDD system controlled by Stored Program Control(SPC) method was constructed and performance testresults were presented using a microprocessor instead of using conventional Wired Program Control(WPC) method. It is shown that the system was designed using a STD O/G unit which has only Point to Point(PTP) access function due to selector driving method as a O/G repeater of this system without any modification. When the system is adopted to a toll exchange system for medium and / or small city, it is expected that the system can be made with small size, high reliability and no use of conventional selector switches. It is also predicted that variation of communication route can be easily realized by simple program modification.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.83-89
• /
• 2001

In this paper, we discuss the vibration suppression control of spatial redundant flexible manipulators through pseudo-inversed of Jacobian. In order to verify our method, the experiments are performed for PTP(Point To Point) motion of spa-tial flexible manipulators(1) with no redundancy(2) with one redundant DOF(degree of freedom). Finally, a comparison between these results is presented to show the performance of out approach.

• IE interfaces
• /
• v.11 no.1
• /
• pp.199-205
• /
• 1998

This paper describes the development of on-the-machine measuring(OMM) system which can directly measure the two and three dimensional machined accuracy using a scanning probe in milling machine. Two algorithms, NC program based continuous path(CP) measurement and CAD data assisted point to point(PTP) measurement, are developed for three dimensional measurements, with consideration of the characteristics of the scanning probe. The algorithms are used to develop an auto measuring system. The delveloped system is compared with the CMM (Coordinate Measuring Machine) in terms of accuracy and repeatability. The OMM system is expected to realize measurement time reduction and hence result in high productivity.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2043-2045
• /
• 2003

본 연구에서는 자기부상 방식의 스테이지 시스템 설계 및 제작을 행하고 시스템의 제어성능평가를 하고자 한다. 본 논문에서는 제어성능의 효율성을 향상시키기 위하여 부상체(Platen)의 기계적인 모델링을 행하고 Platen의 PTP(point to point) 및 궤도추종제어가 가능한 슬라이딩 모드제어기를 제안하였다. 제안한 슬라이딩 모드제어기는 모델링 오차 및 외란에 대해서도 강인한 제어성능을 얻을 수 있으며 수치시뮬레이션을 통하여 그 유용성을 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.237-241
• /
• 2008

Femtocells are cellular access points that connect to a mobile operator's network using residential DSL or cable broadband connections. They have been developed to work with a range of different cellular standards including CDMA, GSM and UMTS. Like legacy base station, the frequency accuracy and phase alignment is necessary for ensuring the quality of service (QoS) for applications such as voice, real-time video, wireless hand-off, and data over a converged access medium at the femtocell. But, the GPS has some problem to be used at the femtocell, because it is difficult to set-up, depends on the satellite condition, and very expensive. So, some techniques are discussed to alternate with the legacy GPS system. NTP, PTP, Synchronous Ethernet use the ethernet to synchronize distributed clocks in packet networks. AGPS support reliable position information than the legacy GPS in poor signal conditions. But, These method also have some problems. So, hybrid timing method like A-GPS+PTP and TV+GPS was developed to make up the weak point of GPS. This paper introduces the each method and compare each other and y propose much better solution for timing synchronization at the Femtocell