• 제목/요약/키워드: Point of zero charge

검색결과 49건 처리시간 0.03초

Ultisol과 Alfisol 및 Inceptisol 토양에서 토양표면전하 측정에 사용된 이온흡착법, 전위차 적정법 및 역적정법간의 비교 (Comparison of the Ion Adsorption Method, Potentiometric Titraion and Backtitration Technique for Surface Charge measurement in Ultisol, Alfisol, and Inceptisol)

  • 이상은;;박준규;임수길
    • 한국토양비료학회지
    • /
    • 제26권3호
    • /
    • pp.160-171
    • /
    • 1993
  • Ultisol(필리핀의 Luisiana 토양)과 Alfisol(필리핀의 Maahas 토양)및 Inceptisol(한국의 용지통) 토양의 표면전하 특성을 전위차 측정법과 역적정법 및 이온흡착법 등의 세가지 방법으로 정량하였고 분석법간의 차이를 비교한 결과는 아래와 같다. 1. 이온흡착법(또는 CEC-AEC method)으로 구한 PZNC(point of zero net charge)값은 Luisiana토양과 Maahas 토양 및 용지통에서 각각 3.1, 2.2 및 2.9였다. 따라서 이들 토양의 자연 pH조건에서는 음전하를 보였다. 2. 전위차 적정법과 역적정법에서 구한 PZSE(point of zero salt effect)값은 Maahas토양 외의 두 토양에서 일치하였다. 3. PZNC값은 PZSE값에 비해 모든 토양에서 낮았는데 이는 영구음전하의 영향으로 생각되었다. 한편 Uehara and gillman(1980)의 이론에 의해 구한 영구음전하는 Luisiana 토양과 Maahas 토양 및 용지통에서 각각 2.6, 4.5 및 0.4me/100g로 pH 7에서 측정된 CEC중 상당히 적은 부분을 차지하였다. 4. 역적정법은 pH가 너무 높거나 낮을 때 전위차 적정법이 표면전하를 과다 평가하는 결점을 보완해 주었으나 여전히 이온흡착법에 비해 과대 평가하고 있어 영구전하의 영향이 큰 보통 토양에서는 이온흡착법의 사용이 나을 것으로 판단되었다.

  • PDF

고다공성 카본 에어로젤(C-Aerogel) 표면 특성 (Surface Properties of the High Porous Carbon Aerogels)

  • 김지혜;이창래;정용수;김양도;김인배
    • 한국표면공학회지
    • /
    • 제41권3호
    • /
    • pp.114-120
    • /
    • 2008
  • The pyrolysized carbon xerogel and aerogels were prepared from the sol-gel polymerization of resorcinol-formaldehyde(RF) followed by the dry process under ambient pressure and supercritical carbon dioxide condition respectively. The thermal behaviour of RF polymer xerogel was investigated with TGA analyzer to correspond with the pyrolysis process. The surface properties such as particle size, morphology and the point of zero charge of the pyrolysized porous carbon aerogels were studied for the precious metal catalyst supported media. It was found that the volume of the polymer aerogel decreased because of the significant linear shrinkage and weight loss of polymer gel during the carbonization. The point of zero charge of the carbon aerogel pyrolysized at $1050^{\circ}C$ under inert gas flow was about 10.

Analysis of the Singular Point of Cyclic Voltammograms Recorded with Various Scan Rates

  • Chang, Byoung-Yong
    • Journal of Electrochemical Science and Technology
    • /
    • 제8권3호
    • /
    • pp.244-249
    • /
    • 2017
  • This paper presents the results of an investigation into the isoamperic point of cyclic voltammograms, which is defined as the singular point where the voltammograms of various scan rates converge. The origin of the unique point is first considered from a theoretical perspective by formulating the voltammetric curves as a system of linear equations, the solution of which indicates that a trivial solution is only available at the potential at which the net current is zero during the reverse potential scan. In addition, by way of a mathematical formulation, it was also shown that the isoamperic point is dependent on the switching potential of the potential scanning. To validate these findings, theoretical and practical cyclic voltammmograms were studied using finite-element based digital simulations and 3-electrode cell experiments. The new understanding of the nature of the isoamperic point provides an opportunity to measure the charge transfer effects without the influence of the mass transfer effects when determining the thermodynamic and kinetic characteristics of a faradaic system.

납으로 오염된 카올리나이트의 양이온교환능력 및 계면동전위 특성 (Cation Exchange Capacity and Zeta Potential Characteristics of Kaolinite Contaminated with Lead)

  • 장경수;강병희
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
    • /
    • pp.38-43
    • /
    • 2002
  • A series of tests were performed to investigate the effects of pH and contamination level on cation exchange capacity and zeta potential in kaolinite loaded with lead. Test results show that cation exchange capacity of kaolinite is found to be in the range from 4 to 20meq/100g and it increased with increasing pH up to the converged number about 20meq/100g over pH 8. And then CEC has a tendency to reduce and converge to zero with increasing the concentration of Pb in the kaolinite surface. Moreover, zeta potential of kaolinite contaminated with lead is found to be in the range from -10 to 5mV, and zero point of charge is measured at about pH 3.5. Zeta potential of kaolinite contaminated with lead decreases with increasing pH values and decreasing Pb concentration of kaolinite.

  • PDF

Effects of solution, sorbate, and sorbent chemistries on polycyclic aromatic hydrocarbon sorption to hydrated mineral surfaces

  • Yim, Soobin
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.132-135
    • /
    • 2003
  • Solution chemistry, sorbate chemistry, and sorbent chemistry were widely investigated to find important factors that affect PAH sorption on mineral surfaces and to elucidate its microscopic mechanism. The solution chemistry, pH and ionic strength caused measurable change of HOC sorption reaction to minerals. The detectable change of Ka occurred at a pH region crossing the PZC (Point of Zero Charge) of each mineral. The PAH hydrophobicity, one of sorbate chemistry, was observed to have a strong correlation with PAM sorption to mineral. Mineral surface area was not found to be a predominant factor controlling PAH sorption. The mineral type might be more likely to play a crucial role in controlling the PAH sorption behavior. The CEC (Cation Exchange Capacity) of mineral, representing surface charge density, has meaningful correlation with regression slope of sorption coefficients (log $K_{d}$) versus aqueous activity coefficients (log Υ$_{w}$).).).

  • PDF

망간 산화물에 의한 3가 크롬의 산화 (Kinetics of Chromium(III) Oxidation by Various Manganess Oxides)

  • 정종배;;임선옥
    • Applied Biological Chemistry
    • /
    • 제37권5호
    • /
    • pp.414-420
    • /
    • 1994
  • 망간 산화물 birnessite, pyrolusite, hausmannite의 표면에서 일어나는 3가 크롬의 산화현상을 조사하였다. 이들은 zero point of charge, 표면적, 그리고 결정도 등에서 차이가 많은데, 크롬 산화현상은 모두 1차 반응이었으며 반응용액의 pH 및 최초 3가 크롬농도가 반응에 큰 영향을 미쳤다. 일반적으로 hausmannite에 의한 산화가 가장 빨랐으며 pyrolusite에 의한 산화는 상대적으로 매우 느렸다. 용액 pH와 최초 3가 크롬농도의 상호 작용이 전체 반응속도를 조절하는 것 같으며 pH가 높고 3가 크롬농도가 높을 경우 망간산화물 표면에 3가 크롬 침전되거나 complex를 형성할 수 있을 것이다. Birnessite와 hausmannite에서는 $pH\;3.0{\sim}5.0$ 범위에서 pH가 낮을수록 산화력이 높았으나 pyrolusite의 경우에는 pH가 높을수록 산화력이 증가하였다. 반응속도는 온도에 또한 민감했다. pH 3.0에서의 산화반응의 activation energies는 일반적으로 diffusion에 필요한 activation energy보다 크게 나타났으나 반응속도를 결정하는 단계가 무엇인지는 확실하지 않다.

  • PDF

레피도크로사이트(lepidocrocite) 표면의 비소 흡착 특성 규명 (Study on Adsorption Features of Arsenic onto Lepidocrocite)

  • 이우춘;정현수;김주용;김순오
    • 자원환경지질
    • /
    • 제42권2호
    • /
    • pp.95-105
    • /
    • 2009
  • 합성된 레피도크로사이트(lepidocrocite)에 대한 비소의 흡착특성을 규명하기 위하여 체계적인 연구를 수행하였다. 본 연구에서 합성된 레피도크로사이트는 $94.8\;g/m^2$의 큰 비표면적을 가졌으며, 전위차 적정법(potentiometric titration)에 의해 측정된 영전하점(point of zero charge, PZC)은 6.57로 나타났는데, 레피도크로사이트의 비소에 대한 높은 제거능은 이러한 특성들에 기인한 것으로 판단된다. pH $2.0{\sim}12$ 범위에서 3가(아비산염 형태) 비소가 5가(비산염 형태) 비소보다 합성된 레피도크로사이트에 대한 흡착력이 크게 나타나서 3가 비소가 5가 비소보다 레피도크로사이트에 대한 친화력이 더 크다는 것을 알 수 있었다. 5가 비소의 흡착은 pH가 2.0에서 12까지 증가하면서 지속적으로 감소한 반면, 3가 비소는 pH가 8.0까지 증가할 때까지는 흡착도 증가하다가 그 이후의 높은 pH조건에서는 흡착이 급격히 감소하는 것으로 조사되었다. 이는 pH에 따라서 레피도크로사이트의 표면전하 특성과 두 비소 종의 존재형태가 변화하기 때문인 것으로 판단된다. 흡착 반응속도에 대한 실험 결과에 의하면, 두 비소 종 모두 4시간 이내에 빠르게 흡착이 완료되는 것으로 나타났는데, 이러한 결과는 레피도크로사이트에 의한 비소의 제거는 주로 흡착반응 이라는 것을 입증한다. 이와 더불어 본 연구결과는 power function과 elovich 모델이 레피도크로사이트에 대한 두 비소 화학종의 흡착반응속도를 모사하는데 가장 적합한 것으로 조사되었다.