• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2100-2105
• /
• 2008

A numerical analysis was conducted to predict the heat transfer characteristics of a high-temperature, high heat flux solar receiver as the end-wall angle varied. The concentration ratio of the solar receiver ranges from 200 to 1000 and the concentrated heat is required to be transported to a certain distance for specific applications. This study deals with a solar receiver incorporating high-temperature sodium heat pipe as well as a typical one that employs a molten-salt circulation loop with the same outer dimensions. The isothermal characteristics in the receiver section is of major concern. The diameter of the solar thermal receiver was 120 mm and the length was 400 mm. FLUENT, a commercial software, was employed to deal with the radiative heat transfer inside the receiver cavity and the convection heat transfer along the channels and heat pipes. The numerical results were compared and analyzed from the view point of heat transfer characteristics the solar receiver system.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.38.1-38.10
• /
• 2016

Background: The aims of this study are to evaluate the lip morphology and change of lip commissure after mandibular setback surgery (MSS) for class III patients and analyze association between the amount of mandibular setback and change of lip morphology. Methods: The samples consisted of 14 class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalogram and cone-beam CT were taken before and about 6 months after MSS. Changes in landmarks and variables were measured with 3D software program $Ondemand^{TM}$. Paired and independent t tests were performed for statistical analysis. Results: Landmarks in the mouth corner (cheilion, Ch) moved backward and downward (p < .005, p < .01). However, cheilion width was not statistically significantly changed. Landmark in labrale superius (Ls) was not altered significantly. Upper lip prominence angle (ChRt-Ls-$ChLt^{\circ}$) became acute. Landmarks in stomion (Stm), labrale inferius (Li) moved backward (p < .005, p < .001). Lower lip prominence angle (ChRt-Li-$ChLt^{\circ}$) became obtuse (p < .001). Height of the upper and lower lips was not altered significantly. Length of the upper lip vermilion was increased (p =< 0.01), and length of the lower lip vermilion was decreased (p < .05). Lip area on frontal view was not statistically significantly changed, but the upper lip area on lateral view was increased and change of the lower lip area decreased (p > .05, p < .005). On lateral view, upper lip prominent point (UP) moved downward and stomion moved backward and upward and the angle of Ls-UP-Stm ($^{\circ}$) was decreased. Lower lip prominent point (LP) moved backward and downward, and the angle of Stm-LP-Li ($^{\circ}$) was increased. Li moved backward. Finally, landmarks in the lower incisor tip (L1) moved backward and upward, but stomion moved downward. After surgery, lower incisor tip (L1) was positioned more superiorly than stomion (p < .05). There were significant associations between horizontal soft tissue and corresponding hard tissue. The posterior movement of L1 was related to statistically significantly about backward and downward movement of cheilion. Conclusions: The lip morphology of patients with dento-skeletal class III malocclusion shows a significant improvement after orthognathic surgery. Three-dimensional lip morphology changes in class III patients after MSS exhibited that cheilion moved backward and downward, upper lip projection angle became acute, lower lip projection angle became obtuse, change of upper lip area on lateral view was increased, change of lower lip area decreased, and morphology of lower lip was protruding. L1 was concerned with the lip tissue change in statistically significant way.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.23-31
• /
• 2007

This study aims to evaluate the illuminance performance of sloped light guide with automated venetian blind systems. For the purpose, a mock-up model was constructed as a prototype of Korean office building with $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and south facing side-window mounted between the clerestory window($2.0m^2$) and the view window($5.6m^2$). The light guide of 1.28m deepth and $29^{\circ}$ tilted angle, is covered with 0.6mm galvanized steel sheet and 97% reflective film. To protect the room from low solar angle, a blind systems, 0.15m deepth and $30^{\circ}$ automated slat angle was installed. To assess illuminance performance, the totally 37 measuring points for illuminance were monitored. For the detailed analysis, photometric sensors were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point) respectively. The performance was measured under clear sky and is monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons of light factor and uniformity are discussed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.443-449
• /
• 2021

In this study, the purpose is to present the foot inclination angle for realizing an image similar to that of the existing examination method and to present the clinical usefulness of the new examination method through comparison between the existing examination method and the newly designed standing foot oblique projection. A foot phantom was used, and the magnification of the image according to the angle was quantitatively evaluated by attaching a nut to the position of the cuboid of the phantom. The internal oblique image acquired using a 30° wedge was set as the standard image. And that image was compared with the images acquired by changing the angle of the foot from 20° to 65° at intervals of 5°. Image evaluation was performed by 3 radiological technologists, and qualitative evaluation using a Likert 5-point scale for evaluation items of true oblique view and quantitative evaluation of the value obtained by measuring the diameter of a nut in each image were performed as image evaluation. For data analysis, reliability analysis between the measure and comparative analysis of the average value for each angle were performed. The qualitative evaluation score for each image was 4.5 to 5 points for most questions in the case of the standard image. And 4 points or less for most questions in the images with a foot angle of 45° or less, and an evaluation score close to the standard image was obtained in the image of 50° or more. And in the quantitative evaluation, the diameter of the nut was measured to be 9.28~9.56 mm. The qualitative evaluation showed a reliability of 0.95~1.0 and the quantitative evaluation was 0.62. As a result of comparing and analyzing the average of the quantitative and qualitative average values for each angle image, the group with the average value most similar to the standard image was images obtained at 55° and 60°, and in the post-analysis, the images of both groups were the same group as the standard image(p<0.01). As a result of this study, it was found that the angle of inclination of the foot for realizing the image most similar to the existing image in the standing foot oblique projection is 55°~60°. In addition, if this test method is applied to the clinic, it is believed that it will help prevent safety accidents such as falls during the test and improve test efficiency by minimizing the movement of patients for the test.

• 한국조경학회지
• /
• 제40권5호
• /
• pp.19-32
• /
• 2012

본 연구의 목적은 대규모 주택단지 개발지로 계획되어 있는 대구광역시 북구 연경동 및 동구 지묘동 일원을 대상지로 선정하여 조망점 선정을 통해 조망대상 및 대상장을 정량적으로 평가해 보고, 이를 토대로 시뮬레이션을 실시하여 계획적 차원에서 개선방안을 제시해 보는데 가장 큰 의의를 두었다. 연구결과를 요약하면 다음과 같다. 우선 조망대상 선정을 위한 문헌분석 결과, 도출된 조망대상은 총 24개로 나타났으며, 최종적으로 도출된 주요 조망대상은 4가지로 나타났다. 다음으로 도출된 조망점 선정기준은 총 15개로 나타났으며, 이들은 다시 공통적인 특성에 따라 조망성, 접근성, 공공성으로 재분류하였다. 예비조망점은 공공성 및 접근성을 평가하여 선정하였으며, 평가 결과, 총 42곳의 예비조망점이 선정되었다. 최종조망점은 선정된 예비조망점을 대상으로 조망성을 평가하여 선정하였으며, 평가 결과 29개의 최종조망점이 선정되었다. 마지막으로 문헌분석 결과, 도출된 평가지표는 총 26개로 나타났다. 조망점별 가치평가 결과, 29곳의 대상장 중 I등급은 2곳, II등급은 3곳, 가장 낮은 V등급에 해당하는 대상장은 3곳으로 나타났다. 다음으로 개선방안을 위한 문제점 분석 결과, 개발계획도면을 고려하지 않은 대상장-1의 경우, 토지모자이크의 다양성 등 4가지 개선지표가 선정되었다. 또한 개발계획도면을 고려한 대상장-2의 경우, 배후 산림으로의 조망이 잘 이루어지며, 시각회랑의 확보가 가능한 건축물 배치 형태는 직각배치, 층수는 약 10층인 것으로 나타났다.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2002년도 춘계학술대회논문집
• /
• pp.21-32
• /
• 2002

In accordance with the development plans of Ulsan harbor, Ulsan new harbor will be contructed considering supporting Ulsan harbor as a safe berthing and departure at single buoy mooring(SBM). In this study, we used a full-mission ship handling simulator adopting 300,000 DWT VLCC manoeuvered at the planned Ulsan SBM. Five masters who have had a long experience of ship maneuvering were called to carry out the simulations, of which each scenario were tried one, completed total of 68 times. The marine traffic safety was assessed in terms of 1) the closest point of approach(CPA) to other SBM and breakwater in the vicinity and the probability of crossing the restricted area of the closest SBM and fairway limit, 2) subjective evaluation such as the mental burden and the maneuvering difficulty of shiphanders, and 3) the opinions of shiphandlers. From the result of this simulation, we have a conclusion as follows; First, because crude oil berthing angle is so small by current S-OiL Co. crude oil buoy by SK Co. No 3 crude oil buoy different view SK Co. No 3 crude oil buoy and interference of current KNOC crude oil buoy, Berthing is impossible, and Emergency departing is very dangerous too operation impossible. Second it is desirable that SK Co. No 2 and No 3 Single buoy Mooring that do different view controls position so that to be not put in straight line each other. Third, SK Co. No 1 and 2 single buoy mooring that do different view to Onsanhang berthing and departing is seized by single buoy mooring by external force ship that set sail does faith control need.

• 한국운동역학회지
• /
• 제16권1호
• /
• pp.151-158
• /
• 2006

The purpose of this study was to find out the kinematical characteristics of arm's basic position in ballet. In order to achieve the purpose of the study, 3D cinematographic analysis was conducted with a ballerina who might performed the perfect arm's basic position. According to the results of this study, it was appeared that the shoulder kept about 78%-82%, the elbow kept about 62%-96%, the wrist kept 52%-109%, and finger kept 48%-110% with the height. Also, movement was formed with $21^{\circ}-77^{\circ}$ of the upper arm angle, $106^{\circ}-164^{\circ}$ of the elbow, $125^{\circ}-140^{\circ}$ of the wrist, and $83^{\circ}-160^{\circ}$ of the shoulder. The left-right ratio of the total arm angle was 98% in the first, second, and third position, and 100% in the forth position. The angle of arm gradient was remained $-68^{\circ}$ in the first position, $-27^{\circ}$ in the second position, $73^{\circ}$ in the third position, and $-11^{\circ}$ in the forth position. Based on the results mentioned above, balance and symmetry of both arms was an important factor in those four positions. Although it is impossible to maintain the position like robot, it may be a good performance if a certain level of extent was remained With respect to this point of view, it may be a good position if the difference between right and left arm in each joint can be remained within 2%. Angle also was an important factor that if the difference in total angle can be remained within 2% it may be an excellent position, there was difference of right and left based on the joint though. Therefore, practice and instruction to make a perfect symmetry as much as possible were needed Also, it would be a good movement if position and angle of joint within 2% difference of right and left arm can be remained In turn, because ballet is movement with expression of the body, beauty of the body and balance of the movement have to be harmonized for beautiful performance. Therefore, it would be a meaningful future study considering the body condition and movement of ballerina to define the beauty.

• 한국콘텐츠학회논문지
• /
• 제17권9호
• /
• pp.173-183
• /
• 2017

본 연구는 VR저널리즘인 뉴욕타임즈의 <난민(THE DISPLACED)>을 중심으로 영상텍스트 분석을 실시하였다. <난민>의 영상텍스트 분석은 앵글, 쇼트(크기, 길이, 이동), 제한된 이용자 주도형 상호작용(시점, 사운드)의 틀로 분석 하였다. 그 결과는 다음과 같다. 첫째, 앵글은 Normal 앵글, Low 앵글 위주로 연출되었다. 둘째, 쇼트는 Medium, Full, Long 쇼트 순으로 연출된 것을 확인 할 수 있었다. 셋째, 쇼트의 길이는 대부분 롱테이크 연출이 많았다. 넷째, 대부분의 영상은 고정된 쇼트로 구성되어졌다. 마지막으로, 제한된 이용자 주도형 상호작용이다. 이는 두 가지 방법으로 나뉘는데 사운드와 독립된 주체의 움직임을 통한 시점유도와 이용자들에게 사실적 상황 인지를 통한 자유로운 시점으로 상호작용을 유도했다. 본 연구는 VR 저널리즘에 대한 보다 심도 있는 논의 전진을 위한 기초 연구라고 할 수 있다.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1355-1364
• /
• 2001

Characteristics of secondary vortices is topologically investigated in the near-wake region of a circular cylinder, where the Taylor's hypothesis does nut hold. The three-dimensional flow fields in the wake-transition regime were measured by a time-resolved PIV for various planes of view. The convection velocities of the Karman and secondary vortices are evaluated from the trajectory of the vortex center. Then, saddle points are determined by applying the critical point theory. It is shown that the inclination angle of the secondary vortices agrees well with the previous experimental data. The flow fields in a moving frame of reference have several critical points and the mushroom-like structure appears in the streamline patterns of the secondary vortices. Since the distributions of fluctuating Reynolds stresses defined by triple decomposition are closely related with the existence of secondary vortices, the physical meaning of them is explained in conjunction with the vortex center and saddle point trajectories.

• 한국조경학회지
• /
• 제31권2호
• /
• pp.58-69
• /
• 2003

The Hemi-sphere projection method produces an image that includes all surrounding visual landscape from a view point. This characteristic can solve the problem of perspective method that has only a limited view angle, and thus can be a potentially effective method for the analysis of visual landscape. This study tried to adopt the hemi-sphere projection method in the evaluation of streetscape, and examined its effectiveness and possibilities. Computer animations using the perspective method and the hemi-sphere method were produced for Bang-Hak Ro, Seoul, and the kames of the animations were reclassed to identify the visibility ratio of physical elements(buildings, sky and mountains). A preference questionnaire was given to 51 university students, and the relationships between the visibility ratio and visual preference were analyzed. The results showed that visual preference of streetscape can be explained by three factors: Openness, Uniformity, and Variousness, accounting for 63.2% of the total variance, and among which Openness showed the highest proportion at 32.1％. The visibility ratio calculated by the hemi-sphere method yielded strong correlation coefficients with Openness, and it was much higher than with the perspective method. The hemi-sphere method also produced significant correlation coefficients about Uniformity and Variousness, but the perspective method could not. The results demonstrated that the hemi-sphere method can provide more accurate observation of visual changes, and that it can be an effective method for the analysis of streetscape.