• Korean Journal of Poultry Science
• /
• v.50 no.4
• /
• pp.267-272
• /
• 2023

This study was conducted to investigate the effect of integrated pest management (IPM) with 3point 5score microscopic monitoring method for laying farms infected with poultry red mites. A total of 8 laying farms infected with poultry red mites were divided into two treatments: 1) integrated pest management with 3point 5score microscopic monitoring method and 2) normal pest management with 3point 5score microscopic monitoring method. The results revealed that there is no significant difference between the groups with respect to the score of poultry red mites not only regardless of disinfection for the laying farms but also from week 4 to week 20 (P>0.05). However, the farm with IPM had a lower (P<0.05) score than those with the normal pest management method on week 24. Based on the result of the present study, controlling the presence of poultry red mites using IPM, along with consistent monitoring and supplementation using the 3point 5score microscopic monitoring method, is deemed effective in reducing the ultimately targeted infection rate of poultry red mites.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.2
• /
• pp.47-55
• /
• 1987

Recently, in precision working, precision is in submicron. Therefore, when we measure various finished goods in superfine measurement, because it is relatively difficult to disregard effect of surroundings, these effect of surroundings must be compensated or canceled. In this study, for roundness measurement, three point method is researched which is able to cancel the effect of rotation accuracy of axis and eccenricity of workpiece. It is difference between this three point method and tradi- tional three point method whose measuring apparatus have three movable pickups posit- ioned with angle and between the pickups. As a results, when rotation accuracy of axis is varied from $0.02\mu\textrm{m}$ to $0.05\mu\textrm{m}$ the width of variation of measured roundness is $0.04\mu\textrm{m}$. And, when eccentricity of workpiece is varied from 0 to $4\mu\textrm{m}$, the width of variation of measured roundness is $0.005\mu\textrm{m}$. These error width are disregardable because they are in 10% of measured roundness. Therefore, by this three point method, the effect of rotation accuracy of axis and the effect of eccentricity of workpiece are canceled. And we are able to select the angle between the pickups ($\phi$ and $\tau$) by means of relation between $F_{k}$ and K.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.99-101
• /
• 2000

Different optimization algorithms have been proposed to solve real and reactive power optimization problems. Most of all, linear programming techniques that employed a simplex method have been extensively used. But, the growth in the size of power systems demands faster and more reliable optimization techniques. An Interior Point(IP) mehod is based on an interior point approach to aim the solution trajectory toward the optimal point and is converged to the solution faster than the simplex method. This paper deals with the use of Successive Linear Programming(SLP) for the solution of the Security Constrained Economic Dispatch(SCED) problem. This problem is solved using the IP method. A comparison with simplex method shows that the interior point technique is reliable and faster than the simplex algorithm.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.22-27
• /
• 1997

In general, the load which acts on the structure is almost independent of time in many locations. In this case. It is difficult to estimate the life with the service load history, because the structure is on the multi- axial and multi-point loading states. In this study, the service load of the excavator which is widely used in industry field was calculated using measured cylinder pressures and displacements. The fatigue life was estimated using the multi-axial and multi-point load counting method. Service load history of 4 pin joint which act independently each other is yielded by mult-axial and multi-point load counting method. The stress spectrum is yielded by superposition of the results of FEM stress analysis applied unit load. Palm- gren-Miner's cumulative Damage is 0.000804 for Von Mises equivalent stress sequence by one side fillet weld S-N curve. This result agress with Bench test results. As a result of this study, the fatigue life esti- mation using the multi-axial and multi-axial and multi-point load counting method is useful.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2018

In this paper, we propose the method to eliminate repetitive processes for key-point detection on multi-scale image space. The proposed method detects key-points from the original image, and select a good key-points using the cluster filters, and create the key-point clusters. And it select reference objects by using direction angles of the key-point clusters, predict the scale of the original image by using the distributed distance ratio. It transform the scale of the reference image, and apply the detection of key-points to the transformed reference image. In the results of the experiment, the proposed method can be found to improve the key-points detection time by 75 % and 71 % compared to SIFT method and scaled ORB method using the multi-scale images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_2
• /
• pp.539-547
• /
• 2013

This research is suggesting the most effective positioning method for GPS based positioning when no GPS reference point is available in the neighborhood. For this purpose, we carried out positioning of the IGS realtime observatories in Australia in various conditions. According to the research, we were certainly assured the one reference point with a short baseline length is more effective for differential positioning than multiple reference points with a long baseline distance beyond 1,000km and suggested the precise point positioning based positioning method can be an excellent substitute when no reference point is available around an unknown point. The research result may be used as the basic data for accurate positioning in poor reference point environments, especially in Antarctica.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.227-230
• /
• 1997

In this paper, robot navigation experiments with a new navigation algorithm are carried out in real environments. The authors already proposed a reactive navigation algorithm for mobile robots using optimal via-point selection method. At each sampling time, a number of via-point candidates is constructed with various candidates of heading angles and velocities. The robot detects surrounding obstacles, and the proposed algorithm utilizes fuzzy multi-attribute decision making in selecting the optimal via-point the robot would proceed at next step. Fuzzy decision making allows the robot to choose the most qualified via-point even when the two navigation goals-obstacle avoidance and target point reaching-conflict each other. The experimental result shows the successful navigation can be achieved with the proposed navigation algorithm for real environments.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.182-187
• /
• 2004

Our research proposes how to, systematically, count function point from initial functional requirements based on natural language. Gradually, Function Point Analysis is used to overcome the limitation of LOC(Line Of Code) for estimating software size. Moreover, it plays an important role in cost management. Function point is derived from initial requirements and is determined by experts who have an education for function point. However, currently there are few researches to cout function point by systematic or automatic rules. Through extending our porposed method, we expect that function point is able to be counted automatically or semi-automatically. This would be our future research

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2034-2042
• /
• 2006

In this study, a complete 3D surface reconstruction method is proposed based on the concept that the vertices, of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out. Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• Korean Management Science Review
• /
• v.14 no.1
• /
• pp.131-149
• /
• 1997

Software cost estimation is an important both for buyers and sellers(developers). We reviewed domestic and foreign researches and practices on software cost estimation with function point method comprehensively, In this paper, we derived four promising alternative function point models. They are an IFPUG(International Function Point User Group)-based model(Model I), a shorthand model for client/sever software systems(Model II), a data-oricnted model for relatively large software projects(Model III), and a general- purpose function point model for non business application softwares as well as business applications(Model IV). Empirical data shows that Model I, II, and IV are very useful function point models. In particular, model II and IV look very useful models since they are concise and accurate. These models can be incorporated in a new improved guideline for software cost estimation. General opinion survey shows that Model I, II and IV are preferable. There are no significant differences in preference between buyers and sellers. The survey also shows that users think function point method is better than step(line of code)-oriented cost estimation methods in many ways including objectivity and estimation accuracy.