• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.23-28
• /
• 2012

The LPG engine technology in Korea has made significant advances with the mass production of LPG vehicle with liquid phase LPG injection system, and have reached to satisfy the SULEV emission regulations. As of now, domestic production of LPG fuelled vehicles in Korea have reached more than 2.4 millions, which is the best in the world. But in the technical point of view, the key technologies for fuel injection system of LPG fuelled engine are mainly dependent on foreign license. Especially, fuel injector in the liquid phase LPG injection system has been imported from C company, which supplies LPG injector worldwide in the name of model D. In the context, it is quite urgent to develop the LPG injector technology in Korea. In this study, WCC coating which is key technology to develop LPG injector by reducing the fuel leakage was developed and tested. Considering the fuel leakage of 0.06cc/min in commercial LPG injector, fuel leakage was reduced down to 0.04cc/min with WCC coating technology and optimization of injector structure.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.2
• /
• pp.1-9
• /
• 1999

Applicability of the pressure gradient method which is formulated based on pressure gradient is verified against turbulent flow analysis. In the pressure gradient method, pressure gradient instead of pressure itself is obtained using continuity constraint. Since correct pressure gradient is found only when mass conservation is satisfied, pressure gradient method can reflect physics of flow field properly The pressure gradient method is formulated with semi-staggered grid system which locates each primitive variables on the same grid point but evaluates pressure gradient in-between. This grid system ensures easy programming and reflection of correct physics in analysis. For verifying applicability of this method, the pressure gradient method is applied to turbulent flow analysis with low Reynolds number $\kappa$-$\varepsilon$ model. Turbulent flows include fully developed channel flow, backward-facing step flow, and conical diffuser flow. Prediction results show that the pressure gradient method can be applied to turbulent flow analysis. However, the pressure gradient method requires somewhat long computation time. Proper way to find optimum under-relaxation factor, $\gamma$, is also need to be developed.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.123-132
• /
• 2018

Reinforced concrete (RC) columns which are the main vertical structural members are exposed to several static and dynamic effects such as earthquake and wind. However, impact loading that is sudden impulsive dynamic one is the most effective loading type acting on the RC columns. Impact load is a kind of impulsive dynamic load which is ignored in the design process of RC columns like other structural members. The behavior of reinforced concrete columns under impact loading is an area of research that is still not well understood; however, work in this area continues to be motivated by a broad range of applications. Examples include reinforced concrete structures designed to resist accidental loading scenarios such as falling rock impact; vehicle or ship collisions with buildings, bridges, or offshore facilities; and structures that are used in high-threat or high-hazard applications, such as military fortification structures or nuclear facilities. In this study, free weight falling test setup is developed to investigate the behavior effects on RC columns under impact loading. For this purpose, eight RC column test specimens with 1/3 scale are manufactured. While drop height and mass of the striker are constant, application point of impact loading, stirrup spacing and concrete compression strength are the experimental variables. The time-history of the impact force, the accelerations of two points and the displacement of columns were measured. The crack patterns of RC columns are also observed. In the light of experimental results, low-velocity impact behavior of RC columns were determined and interpreted. Besides, the finite element models of RC columns are generated using ABAQUS software. It is found out that proposed finite element model could be used for evaluation of dynamic responses of RC columns subjected to low-velocity impact load.

• Clean Technology
• /
• v.7 no.2
• /
• pp.127-132
• /
• 2001

The effects of activated-carbon (AC) packing length on the Pressure Swing Adsorption (PSA) performance was investigated for the hydrogen separation from the multicomponent mixture gas. Linear driving force model was used to describe mass transfer between two phase and coupled Langmuir isotherm was used for each component as a nonlinear adsorption isotherm. When two adsorbents with a different adsorption capacity were packed consecutively in one bed, it is very important to determine the packing ratio of zeolite to activated carbon affecting the purity and recovery of the product. The activated carbon packing length in adsorption tower of 120 cm was determinated by the ending point of $CO_2$ contration. The optimum length of an activated carbon layer was 65 cm for production of high-purity hydrogen.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.995-1001
• /
• 2005

Implicit Integration has become a standard approach to efficient cloth animation, and it guarantees the stability of the system so that large steps can be used. Therefore, it is regarded as the best method for the real-time or interactive animation of cloth. Since the implicit method was introduced for stable cloth animation, various cloth animation techniques based on the method have been proposed. It is now possible to generate the real-time animation of cloth model with thousands of mass-point in general PC environments. Although the implicit method guarantees the stability, the implementation of the implicit method is generally more difficult than that of the explicit method. Even worse, it is very difficult to parallelize the computation process of the implicit method. The cloth animation with implicit method can be formalized as a linear system solving. In this paper we propose an stable and efficient cloth animation techniques based on the implicit method. The proposed method can be easily parallelized. Self-collision is another important issue in cloth animation, we also propose an efficient self-collision avoidance techniques.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.371-378
• /
• 2011

Concrete is affected by various deterioration factors, such as $CO_2$ and chloride ions from the sea, which cause carbonation and salt attack on concrete. These deterioration phenomena cause steel corrosion in RC structures. Although a great deal of research has been carried out in this area thus far, it is difficult to know the point at which corrosion will occur to a reinforced bar. As the diffusion of deterioration factors depends on the water content in concrete, it is imperative to assess the condition of absorbed water content. A mass measuring method was applied to calculate the absorbed water diffusion coefficient, as well as non-linear finite element method(FEM) analysis. As a result, it was found that W/C and unit water content in concrete mixture affect the diffusion coefficient decision.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.157-167
• /
• 2011

Currently, interest on physical distribution is increasing due to burden of oil cost increases as oil price rises day by day. As interest grows, there are number of studies have been conducting on saving the cost of distribution. On the other hand, number of study on service of distribution is insufficient. Actually, subject of service of physical distribution have been studied by number of survey organizations, research organizations and mass media. Although, configuration for each organization is different from each other and it is hard to measure objective satisfactory factor of customers. This means needs for constructing standardized measuring tool as well as research on measuring service quality of distribution is not active. Therefore, this research is to compare and analyze compatibility of service quality measuring using SERVQUAL and SERVPERF and trying to clarify differences affected by importance service quality by each level to actual service quality. Also, this research is to make basic and standardized measuring model to improve quality of physical distribution especially using analysis of service quality and customer satisfaction of pallet pool service which contributes rationalization of distribution and reduce the cost by standardizing specification and size of pallet, allowing sharing of pallet. To conduct this research, case study of a company A is used where it is in a pallet pool business. Using this example, the goal is to give help on pallet pool business a strategic exercise if the business by point out major factors that affect customer satisfaction by collecting customer assessment along with examination of SERVQUAL and SERVPERF in measuring service quality if pallet pool service.

• Advances in aircraft and spacecraft science
• /
• v.3 no.3
• /
• pp.243-257
• /
• 2016

The increase of air traffic volume has brought an increasing amount of issues related to carbon and NOx emissions and noise pollution. Aircraft manufacturers are concentrating their efforts to develop technologies to increase aircraft efficiency and consequently to reduce pollutant discharge and noise emission. Ultra High By-Pass Ratio engine concepts provide reduction of fuel consumption and noise emission thanks to a decrease of the jet velocity exhausting from the engine nozzles. In order to keep same thrust, mass flow and therefore section of fan/nacelle diameter should be increased to compensate velocity reduction. Such feature will lead to close-coupled architectures for engine installation under the wing. A strong jet-wing interaction resulting in a change of turbulent mixing in the aeroacoustic field as well as noise enhancement due to reflection phenomena are therefore expected. On the other hand, pressure fluctuations on the wing as well as on the fuselage represent the forcing loads, which stress panels causing vibrations. Some of these vibrations are re-emitted in the aeroacoustic field as vibration noise, some of them are transmitted in the cockpit as interior noise. In the present work, the interaction between a jet and wing or fuselage is reproduced by a flat surface tangential to an incompressible jet at different radial distances from the nozzle axis. The change in the aerodynamic field due to the presence of the rigid plate was studied by hot wire anemometric measurements, which provided a characterization of mean and fluctuating velocity fields in the jet plume. Pressure fluctuations acting on the flat plate were studied by cavity-mounted microphones which provided point-wise measurements in stream-wise and spanwise directions. Statistical description of velocity and wall pressure fields are determined in terms of Fourier-domain quantities. Scaling laws for pressure auto-spectra and coherence functions are also presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.617-628
• /
• 2019

The currently considered pyrotechnic separation nut is separated through the complicated process, because it has many internal moving parts and two variable-volume chambers connected by the vent hole. Therefore, it has many design parameters. Some of these are the contact angles between internal moving parts, the masses of the internal moving parts, the inner diameter of the push rod protrusion, the initial volumes of the chambers, the mass of the explosive charge, and the diameter of the vent hole. To improve the pyrotechnic separation nut, it is necessary to understand how the behavior of the separation nut is changed according to design parameters. In this point of view, parametric studies are carried out using the previously proposed prediction model for pyrotechnic separation nut behaviors. In each case, the parameter of the interest is changed while the others are kept unchanged. From the results, it is investigated how each design parameter influences the separation behavior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.20-29
• /
• 2021

In the Industry 4.0 era, artificial intelligence has attracted considerable interest for learning mass data to improve the accuracy of forecasting and classification. On the other hand, the current method of detecting anomalies relies on traditional statistical methods for a limited amount of data, making it difficult to detect accurate anomalies. Therefore, this paper proposes an artificial intelligence-based anomaly detection methodology to improve the prediction accuracy and identify new data patterns. In particular, data were collected and analyzed from the point of view that sensor data collected at vehicle idle could be used to detect abnormalities. To this end, a sensor was designed to determine the appropriate time length of the data entered into the forecast model, compare the results of idling data with the overall driving data utilization, and make optimal predictions through a combination of various sensor data. In addition, the predictive accuracy of artificial intelligence techniques was presented by comparing Convolutional Neural Networks (CNN) and Long Short Term Memory (LSTM) as the predictive methodologies. According to the analysis, using idle data, using 1.5 times of the data for the idling periods, and using CNN over LSTM showed better prediction results.