• Journal of Positioning, Navigation, and Timing
• /
• 제12권2호
• /
• pp.157-166
• /
• 2023

Several experiments were carried out to analyze the impact of the modernized Global Positioning System (GPS) L2C signal on pseudorange-based point positioning. Three dual-frequency positioning algorithms, ionosphere-free linear combination, ionospheric error estimation, and simple integration, were used, and the results were compared with those of Standard Point Positioning (SPP). An analysis was conducted to determine the characteristics of each dual-frequency positioning method, the impact of the magnitude of ionospheric error, and receiver grade. Ionosphere-free and ionospheric error estimation methods can provide improved positioning accuracy relative to SPP because they are able to significantly reduce the ionospheric error. However, this result was possible only when the ionospheric error reduction effect was greater than the disadvantage of these dual-frequency positioning algorithms such as the increment of multipath and noise, impact of uncertainty of unknown parameter estimation. The RMSE of the simple integration algorithm was larger than that of SPP, because of the remaining ionospheric error. Even though the receiver grade was different, similar results were observed.

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.110-116
• /
• 1998

For the vibration analysis of 3-dimensional piping system containing fluid flow, a transfer matrix method is presented. The fluid velocity and pressure were considered, that coupled to longitudinal and flexural vibrations. Transfer matrices and point matrices were derived from direct solutions of the differential equations of motion of pipe conveying fluids, and the variations of natural frequency with flow velocity for 3-dimensional piping system were investigated.

• Structural Engineering and Mechanics
• /
• 제65권3호
• /
• pp.263-274
• /
• 2018

In this study, we propose a frequency domain spectral element method (SEM) for the vibration analysis of a multi-span beam subjected to a moving point force. This study is an extension of the authors' previous study for a single-span beam subjected to a moving point force, where the two-element model-based SEM was applied. In this study, each span of a multi-span beam is represented by the Timoshenko beam model and the moving point force is transformed into the frequency domain as a series of each stationary point force distributed on the multi-span beam. The span at which a stationary point force is located is represented by two-element model, but all other spans are represented by one-element models. The vibration responses to a moving point force are obtained by superposing all individual vibration responses generated by each stationary point force. The high accuracy and computational efficiency of the proposed SEM are verified by comparing the solutions by SEM with exact analytical solutions by the integral transform method (ITM) as well as the solutions by the finite element method (FEM).

• 한국습지학회지
• /
• 제15권2호
• /
• pp.233-250
• /
• 2013

강수지표의 변화시점(change point) 분석을 이용하여 기후의 특성이 점진적 또는 급진적으로 변화하는지에 대하여 조사하였다. 강수지표를 크게 총량(amount), 극치(extremes)와 빈도(frequency)로 구분하였고, 각각의 지수를 RIA(Rainfall Index for Amount), RIE(Rainfall Index for Extremes)와 RIF(Rainfall Index for Frequency)로 정의하였다. 계산된 강수지표의 시간에 따른 변화를 알아보기 위하여 BCP(Bayesian Change Point)를 적용하였다. 분석 결과, 남한지역의 강수지표는 연 강우일수와 200년 빈도 확률 강수량을 제외하고는 모두 증가 하는 것으로 확인되었다. RIA는 울릉도 지점에서 변화지점의 유의성에 대해 매우 명확한 모습을 보였고 RIE는 제천, 서귀포와 구미 등에서 비교적 유의한 결과가 확인되었다. 또한, 1990년대 이후에 변동지점의 개수가 증가하고 있으며, 변동지점의 횡적인 폭 또한 비교적 넓어지고 있었다. 이러한 사실에 근거하여 볼 때 강수에 대한 정상성 가정에 대한 재고가 필요하리라 판단되었다.

• 대한전기학회논문지
• /
• 제39권6호
• /
• pp.557-567
• /
• 1990

This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter with frequency control. The natural commutation of all switch element is realized when the switching frequency is below the resonant frequency of the tank circuit, and the analysis is limited to only this region. For the analysis method, state plane technique is adopted, and each operation mode is defined from normalized switching frequency Fsn. Under this condition, circuit performance is analyzed ideally. The physical characteristics of the series resonant converter is easily grasped by this analysis method with frequency control and this analytical results are directly applicable to the actual converter design. The validity of the analysis is verified by comparing with experimental results and the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1808-1817
• /
• 1994

Unsteady aerodynamic analysis of an aircraft is done using a frequency domian 3-D panel method. The method is based on an unsteady linear compressible lifting surface theory. The lifting surface is placed in a flight patch, and angle of attack and camber effects are implemented in upwash. Fuselage effects are not considered. The unsteady solutions of the code are validated by comparing with the solutions of a hybrid doublet lattice-doublet point method and a doublet point method for various wing configurations at subsonic and supersonic flow conditions. The calculated results of dynamic stability derivatives for aircraft are shown without comparision due to lack of available measured data or calculated results.

• 대한전기학회논문지
• /
• 제39권9호
• /
• pp.934-943
• /
• 1990

There are no turn-on losses in the series Resonant Converter which operates above the resonance frequency, and the commutation stress on the switched component is low. For a given Series Resonant Converter with specified load resistance, the output voltage is a function of the operation frequency. This paper describes the static and dynamic characteristic analysis of the Series Resonant DC to DC Converter, which is operating above the resonant frequency, with frequency control. For the analysis method, state plane technique is adopted, and the circuit operation is defined from normalized switching frequency, Fsn. Under this condition, circuit performance is analyzed ideally. The validity of the proposed analysis is verified by comparing with experimental results, the stability of the converter is confirmed against small variations around the operating point by conventional frequency domain analysis, and the stress quantity added to switch component is shown.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.117-126
• /
• 2016

In this paper, a numerical procedure for the natural vibration analysis of plates with openings and carlings based on the assumed mode method is extended to assess their forced response. Firstly, natural response of plates with openings and carlings is calculated from the eigenvalue equation derived by using Lagrange's equation of motion. Secondly, the mode superposition method is applied to determine frequency response. Mindlin theory is adopted for plate modelling and the effect of openings is taken into account by subtracting their potential and kinetic energies from the corresponding plate energies. Natural and frequency response of plates with openings and carlings subjected to point excitation force and enforced acceleration at boundaries, respectively, is analysed by using developed in-house code. For the validation of the developed method and the code, extensive numerical results, related to plates with different opening shape, carlings and boundary conditions, are compared with numerical data from the relevant literature and with finite element solutions obtained by general finite element tool.

• 한국음향학회지
• /
• 제28권4호
• /
• pp.336-342
• /
• 2009

일정한 주파수의 음향신호를 발생시키는 표적이 기동할 때 한 개의 고정된 센서에서 관측된 신호의 주파수는 시간에 따라 도플러 변이가 발생한다. 이러한 도플러 변이 현상을 이용한 기존의 CPA (Closest Point of Approach) 분석으로 센서 수신기에 표적이 최단거리로 근접했을 때의 시간, 거리, 속력 그리고 실제 신호의 중심주파수를 추정할 수 있다. 본 논문에서는 고정된 단일 센서 대신에 일정한 속도로 기동하는 배열센서 수신기에서 주파수뿐만 아니라 표적의 방위각을 관측하여 이로부터 표적의 실제 기동속도를 추정하는 기법을 제안한다. 그리고 제안한 기법의 성능검증을 위해 오차 분석 및 모의 실험을 수행하였다.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.87-92
• /
• 2009

현재까지의 치수대책이나 복구대책은 대부분 당해 연도의 지역별 피해액만을 기준으로 이루어지고 있다. 그러나 지역의 홍수 발생빈도와 홍수피해액 관계를 분석하면 지역의 홍수피해특성을 고려한 보다 합리적인 치수대책을 마련할 수 있다. 본 연구에서는 점빈도 분석을 이용하여 과거 38년('70~'07)간의 전국 시군구별 홍수피해자료를 이용하여 무차원 홍수피해 발생빈도와 피해액간의 상관관계를 분석하였다. 분석결과를 바탕으로 사분면적 해석방법을 도입하여 전국 시군구의 홍수피해 유형을 다빈도-대피해 지역, 다빈도-소피해 지역, 소빈도-대피해 지역, 소빈도-소피해 지역이라는 네 가지 유형으로 구분하였다. 본 연구의 분석결과를 활용하면 시군구별로 홍수피해액별 발생빈도와 발생빈도별 홍수피해액을 손쉽게 비교할 수 있기 때문에 지역의 치수방어년을 설정하는 데에도 많은 도움이 될 수 있다. 또한, 발생빈도별 홍수피해액을 산정할 수 있기 때문에 치수사업의 효과를 분석하거나 예측하기 위한 기초자료로도 충분히 활용할 수 있을 것이다.