• Toxicological Research
• /
• v.11 no.1
• /
• pp.15-21
• /
• 1995

Several populations of lymphocytes possess receptors for autonomic neurotransmitter, which make lymphocytes susceptible to autonomic stimulation. This study was to evaluate the functional alternation of effector cells of the immune system. Female Balb/C mice, 15-20 g, were injected with MA subcutaneously under various conditions. Mixed lymphocyte reaction (MLR) showed certain T cell subsets were affected by MA. The level of interleukin-2 (IL-2) production was inhibited due to a defect in expression of the IL-2 receptor. In mice injected with 20 mg MA/kg, 1 day before assay, phagocytosis of peritoneal macrophages showed $14.07\pm3%$, which was similar degree to 5 mg MA/kg treatment for 4 consecutive days. Phagocytosis was almost recovered to that of control after 4 day in 20 mg/kg injected mice. Maximum inhibition of plaque forming cell (PFC) occurred when MA was given early, indicating the inductive time point of antibody production was affected. The cortisol level increased in the MA treated group (0.05, 0.20, and $0.08{\mu}g$/dl for control, low, and high dose-MA treated mice, respectively). Based on these results, MA has general suppression effects on the immune systems by functional alteration of effector cells. Considering the increment of serum cortisol levels, MA partially impacts the neuroendocrine system to lead to failure of immune response.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.713-719
• /
• 2000

In order to Prepare the$Ge_xSi_{1-x}/Si$(111) heterosructure by solid phase epitaxy (SPE), about 1000A of Au and about 1000A Ge were sequentially deposited on the Si(111) substrate. The resulting Ge/Au/Si(111) samples were isochronically annealed in the high vacuum condition. The behaviors of Au and Ge during thermal annealing and the structural Properties of $Ge_xSi_{1-x}$ films were characterized by Auger electron spectroscopy (AES), X-ray diffraction (XRD) and high resolution transmission electron microscopy (TEM). The a-Ge/Au/Si(111) structure was converted to the Au/GeSi/Si(111) structure. Defects such as stacking faults, point defects and dislocations were found at the GeXSil-X(111) interface, but the film was grown epitaxially with the matching face relationship of $Ge_xSi_{1-x}/$(111)/Si(111). Twin crystals were also found in the $Ge_xSi_{1-x}/$(111) matrix.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.4
• /
• pp.234-239
• /
• 2008

Objective : There are a few reports on the complications of surgery for epilepsy. We surveyed our data to present complications of epilepsy surgeries from the neurosurgeon's point of view and compare our results with other previous reports. Methods : A total of 179 surgical procedures for intractable epilepsy (41 diagnostic, 138 therapeutic) were performed in 92 consecutive patients (10 adults, 82 children) during the last 9.2 years (February. 1997-April. 2006). Their medical records and radiological findings were reviewed to identify and analyze the surgical complications. Results : The diagnostic procedures encompassed various combinations of subdural grid, subdural strips, and depth electrodes. Four minor transient complications developed in 41 diagnostic procedures (4/41=9.8%). A total of 138 therapeutic procedures included 28 anterior temporal lobectomies, 21 other lobectomies, 6 lesionectomies, 21 topectomies, 13 callosotomies, 20 vagus nerve stimulations, 13 multiple subpial transections, and 16 hemispherectomies. Twenty-six complications developed in therapeutic procedures (26/138=18.8%). Out of the 26 complications, 21 complications were transient and reversible (minor; 21/138=15.2%), and 5 were serious complications (major; 5/138=3.6%). Five major complications were one visual field defect, two mortality cases and two vegetative states. There were 2 additional mortality cases which were not related to the surgery itself. Conclusion : Our results indicate that complication rate was higher than previous other reports in minor complications and was comparable in major complications. However, our results show relatively high frequency of mortality cases and severe morbidity case compared to other previous reports. The authors would like to emphasize the importance of acute postoperative care in young pediatric patients as well as meticulous surgical techniques to reduce morbidity and mortality in epilepsy surgery.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.740-746
• /
• 2011

Purpose: In the treatment of the unilateral cleft lip nasal deformities, the correction of the low-nostril height and short-columella are very difficult problems. We report the treatment outcomes of web uni-limb Z-plasty used for correction of unilateral cleft lip nasal deformities by using photographic analysis. Methods: A total of 36 patients with unilateral cleft lip nasal deformities were enrolled in this study, who underwent web uni-limb Z-plasty and were followed up for at least 6 months. First, a triangular flap was made on the medial side of alar-columella web. The nostril apex of cleft side was corrected to a higher point compared to noncleft side by 2 mm. The flap was transposed into the defect of the vestibule. To reduce the bulging of the flap, horizontal cinching sutures were added. Postoperative outcomes were evaluated by using photographic analysis. 2 indices and 1 angle were measured on their photographs taken before and after the surgery. Symmetry was also evaluated by means of the noncleft side to cleft side index. For anthropologic assessment, observers described postoperative outcomes, using Ordinary Scale Method. Results: The postoperative values obtained in photographic analysis improved compared to preoperative ones. More improving anthropologic assessment was shown in post-than pre-operative. Conclusion: Although, further long term follow up is needed, we found this technique to be an effective procedure to the symmetry of nostril apex level and the lengthening of columella in the unilateral cleft lip nasal deformities.

• Archives of Plastic Surgery
• /
• v.39 no.2
• /
• pp.138-142
• /
• 2012

Background : Electrical burns are one of the most devastating types of injuries, and can be characterized by the conduction of electric current through the deeper soft tissue such as vessels, nerves, muscles, and bones. For that reason, the extent of an electric burn is very frequently underestimated on initial impression. Methods : From July 1999 to June 2006, we performed 15 cases of toe tissue transfer for the reconstruction of finger defects caused by electrical burns. We performed preoperative range of motion exercise, early excision, and coverage of the digital defect with toe tissue transfer. Results : We obtained satisfactory results in both functional and aesthetic aspects in all 15 cases without specific complications. Static two-point discrimination results in the transferred toe cases ranged from 8 to 11 mm, with an average of 9.5 mm. The mean range of motion of the transferred toe was $20^{\circ}$ to $36^{\circ}$ in the distal interphalangeal joint, $16^{\circ}$ to $45^{\circ}$ in the proximal interphalangeal joint, and $15^{\circ}$ to $35^{\circ}$ in the metacarpophalangeal joint. All of the patients were relatively satisfied with the function and appearance of their new digits. Conclusions : The strategic management of electrical injury to the hands can be both challenging and complex. Because the optimal surgical method is free tissue transfer, maintenance of vascular integrity among various physiological changes works as a determining factor for the postoperative outcome following the reconstruction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.1
• /
• pp.75-81
• /
• 2011

Dissimilar joining of aluminum 6061-T6 alloy to aluminum 5083-O alloy was performed using friction-stir welding technique. The mechanical properties, hardness, macro- and micro-structure on dissimilar friction-stir-weld aluminium alloy were investigated. Mechanical properties of the weld mainly depend on which Al alloy is placed at the retreating sides of the rotating tool respectively during dissimilar friction-stir weld because the microstructure of stir zone was mainly composed of welded Al alloys of the retreating side. Onion ring pattern was observed like lamella structure stacked by each Al alloy in turn. It apparently results in defect-free weld zone that traverse speed was changed to 124 mm/min under conditions of tool rotation speed like 1250 rpm with 5 mm of tool's prove diameter, 4.5 mm of prove length, 20 mm of shoulder diameter, and $2^{\circ}$ of tilting angle. The 231 MPa of ultimate stress and the 121 MPa of yield point are obtained about the friction-stir-welded Al 6061-T6(AS) to Al 5083-O(RS).

• Korean Institute of Interior Design Journal
• /
• v.21 no.2
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• Structural Engineering and Mechanics
• /
• v.74 no.6
• /
• pp.771-787
• /
• 2020

The paper provides an inside look into experimental measurements, followed by numerical simulations and their related uncertainties. The goal of the paper is to present findings related to blast loading and the handling of defects that are inherent in experiments. Very often it might seem that experiments are simplified reflections of real-life conditions. In most cases this is true, but there is a good reason for that. The more complex an experiment is, the larger the amount of uncertainties that can be expected. This especially applies when the blast loading of concrete is the subject of research. When simulations fail to reproduce the results of experimental measurements, it does not necessarily mean there is something wrong with the numerical model. The problem could be missing information. Put differently, the numerical simulation may lack information that seemed irrelevant with regard to the experiment. In the presented case, a reference simulation with a proven material model unexpectedly failed to replicate the results of an experiment where concrete slabs were exposed to blast loading. This resulted in a search for possible unknowns. When all of the uncertainties were examined, the missing information turned out to be the orientation of the charge to the concrete slab. Since the experiment was burdened with error, a sensitivity study had to take place so the influence of this factor could be better understood. The findings point to the fact that even the smallest defect during experiments must somehow be taken into account when designing numerical simulations. Otherwise, the simulations are not correlated to the experiments, but merely to some expectations.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.2
• /
• pp.101-106
• /
• 2015

Objective : The aim of this study was to explore the immunity in rats transplanted with adipose-derived mesenchymal stem cells (ADSCs) and acellular nerve (ACN) for repairing sciatic nerve defects. Methods : ADSCs were isolated from the adipose tissues of Wistar rats. Sprague-Dawley rats were used to establish a sciatic nerve defect model and then divided into four groups, according to the following methods : Group A, allogenic nerve graft; Group B, allograft with ACN; Group C, allograft ADSCs+ACN, and Group D, nerve autograft. Results : At the day before transplantation and 3, 7, 14, and 28 days after transplantation, orbital venous blood of the Sprague-Dawley rats in each group was collected to detect the proportion of $CD3^+$, $CD4^+$, and $CD8^+$ subsets using flow cytometry and to determine the serum concentration of interleukin-2 (IL-2), tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$) and $interferon-{\gamma}$ ($IFN-{\gamma}$) using enzyme-linked immunosorbent assay (ELISA). At each postoperative time point, the proportion of $CD3^+$, $CD4^+$, and $CD8^+$ subsets and the serum concentration of IL-2, $TNF-{\alpha}$, and $IFN-{\gamma}$ in group C were all near to those in group B and group D, in which no statistically significant difference was observed. As compared with group A, the proportion of $CD3^+$, $CD4^+$, and $CD8^+$ subsets and the serum concentration of IL-2, $TNF-{\alpha}$, and $IFN-{\gamma}$ were significantly reduced in group C (p<0.05). Conclusion : The artificial nerve established with ADSCs and ACN has no obvious allograft rejection for repairing rat nerve defects.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.129-130
• /
• 2006

A stoichiometric mixture of evaporating materials for $CdIn_2S_4$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, $CdIn_2S_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by hot wall epitaxy(HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $420^{\circ}C$, respectively. After the as-grown $CdIn_2S_4$ single crystal thin films was annealed in Cd-, S-, and In-atmospheres, the origin of point defects of $CdIn_2S_4$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{cd}$, $V_s$, $Cd_{int}$, and $S_{int}$, obtained by PL measurements were classified as a donors or acceptors type. And we concluded that the heat-treatment m the S-atmosphere converted $CdIn_2S_4$ single crystal thin films to an optical p-type. Also. we confirmed that In in $CdIn_2S_4$/GaAs did not form the native defects because In in $CdIn_2S_4$ single crystal thin films existed in the form of stable bonds.