• 대한전자공학회논문지
• /
• 제27권1호
• /
• pp.96-104
• /
• 1990

In this paper, a novel method of jig-saw puzzle matching is proposed using a modifided boundary matching algorithm without a priori knowledge for the matched puzzle. Specifically, a boundary tracking algorithm is utilised to segment each puzzle from low-resolution image data. Segmented puzzle is described via corner point, angle and distance between two adjacent coner point, and convexity and/or concavity of corner point. Proposed algorithm is implemented and tested in IBM PC and PC version vision system, and applied successfully to real jig-saw puzzles.

• 대한구순구개열학회지
• /
• 제6권1호
• /
• pp.1-15
• /
• 2003

이차골 이식술을 시행 받은 구순 구개열을 가지는 성인 남자 20명의 두부계측방사선 사진을 McNamara씨 분석법을 중심으로 하여 계측한 결과는 다음과 같다. 구순 구개열 환자에서 Na. perpendicualr to point A칼은 글.98±5.70, SWh angle 값은 76.45±4.69, Pogonion to Na. perpendicular간은 -6.38± 6.73을 나타내었다. Effective maxillary length는 85.6±4.42, effective mandibular length 값은 123.88±7.10을 보였고 하악각은 29.9±5.09, facial axis angle은 5.53±2.03으로 관찰되었다. Point A에 대해 상악 전치의 돌출도는 3.95±2.74의 값을 보였다.

• 한국운동역학회지
• /
• 제14권1호
• /
• pp.117-131
• /
• 2004

The foreign superior players and national team players' turning phase was measured, compared and analyzed to help the representative players improve the skill of turn. The underwater video camera used to analyze and evaluate the representative players' skill of turn in detail and the result is as follows. 1. The record for the phase of turn was similar to the rank of the last record. The improvement of the skill of turn was required because Korean players' record was lower than the foreign players' one. In case of 200m events the 1st turn was the fastest and it took more time as the turn is repeated. 2. It shows that the preparation phase and turing motion cause the difference between the players and within one player. 3. The horizontal movement of center of gravity moves to turning point slowly in the preparation phase, does not move nearly in the turning phase and increase again in the propulsion phase. Good record has short time for turn phase. The result means that the shorten the turning phase is the most important factor. Therefore the preparation for this is required. The vertical movement is maintained or increase a little and then move to from the turning phase. 4. The characteristic of horizontal velocity in center of gravity is that there is any big changes at the preparation phase, the faster velocity is found from the better record and the accelerating time is fast at the propulsion phasen. The wrong motion is made by not using the swimming velocity for fuming and waiting and more time is required by this. 5. The angle of knee when the player touch the turning point is 106.22-135.56 and the maximum angle of knee during the driving after the touch of tuning point is full extension. The size of maximum angle of knee did not match with the required time of propulsion phase. It seems that the individual difference is big when the players touch the turning point the angle of knee and the research for the individual angle which can reveal the maximum power should be carried out. The national team player's skill for the him is behind the foreign players' one and a lot of problems were found. It shows that the players could not practice the skill for turn during the training. The 1st reason for it is the various facilities like underwater window or analyzing equipment like underwater camera with which the coaches can teach and correct the players' detailed skill. It is need to evaluate the players' detailed skill exactly and correct it by objective data to complete the good skill in the future. In this regard, the investment for the facility is necessary.

• 전자공학회논문지
• /
• 제53권1호
• /
• pp.118-125
• /
• 2016

본 논문에서는 얼굴 영역 수술용 네비게이션을 위한 스테레오 비전과 CT 영상을 이용하여 환자-영상 간 정합(Image to patient registration) 알고리즘의 성능을 평가한다. 환자 영상 간 정합은 스테레오 비전 영상의 특징점 추출과 이를 통한 3차원 좌표 계산, 3차원 좌표와 3차원 CT 영상과의 정합 과정을 거친다. 스테레오 비전 영상에서 3가지 얼굴 특징점 추출 방법과 3가지 정합 방법을 사용하여 생성될 수 있는 5가지 조합 중 정합 정확도가 가장 높은 방법을 평가한다. 또한 머리의 회전에 따라 환자 영상 간 정합의 정확도를 비교한다. 실험을 통해 머리의 회전 각도가 약 20도의 범위 내에서 Active Appearance Model과 Pseudo Inverse Matching을 사용한 정합의 정확도가 가장 높았으며, 각도가 20도 이상일 경우 Speeded Up Robust Features와 Iterative Closest Point를 사용하였을 때 정합 정확도가 높았다. 이 결과를 통해 회전각도가 20도 범위 내에서는 Active Appearance Model과 Pseudo Inverse Matching 방법을 사용하고, 20도 이상의 경우 Speeded Up Robust Features와 Iterative Closest Point를 이용하는 것이 정합의 오차를 줄일 수 있다.

• 전자공학회논문지
• /
• 제53권3호
• /
• pp.151-159
• /
• 2016

본 연구의 목적은 가돌리늄 조영제를 사용한 Head & Neck MR Angio검사에 있어서 매개변수인 FA(Flip Angle)이 MR신호에 미치는 영향에 대해서 알아보고자 하였으며, 이에 따른 FA의 적정 값을 제시하는 것이다. 실험은 FA증가에 따른 MR팬텀실험과 임상실험으로 진행하였고, 이에 대한 정량적 분석이 이루어졌다. 실험결과 팬텀실험에서의 조영증강 반응시작 지점인 RSP(Reaction Starting Point)는 FA증가에 따라 300~400 mmol 사이에서 반응하였고, 최대 신호강도인 MPSI(Max Peak Signal Intensity)는 2,086, 3,705, 5,109, 6,194, 7.096, 7,192 [a.u]를 기록하였다. MPSI가 형성되는 몰농도 지점인 MPP(Max Peak Point)는 FA에 증가에 따라 40, 50, 50, 40, 50, 40 mmol에서 보였으며, MPSI의 증가율인 IRMPSI(Increase Rate of MPSI)는 77.6%, 37.9%, 21.2%, 14.6%, 1.4%임을 확인하였다. 임상실험에서의 평가기준인 SICB(Signal Intensity of Carotid artery Bifurcation)는 FA증가에 따라 각 평균값 2392.5, 4165.2, 4270, 3502.2, 3263.7, 3119.6 [a.u]를 기록하였고, 아티팩트 발생율인 ORA(Occurence Rate of Artifact)는 0, 0, 20, 40, 50, 70%로 점차 증가하였다. 본 연구를 통하여 FA의 증가는 혈관 내 가돌리늄과 결합한 H1스핀의 신호강도와 아티팩트에 영향을 미친다는 사실을 확인하였고, 이는 실제 임상에서의 CE(Contrast Enhanced)-Head&Neck MR Angio검사에 있어서 본 연구의 데이터를 활용한다면 진단학적으로 효율적인 MR Angiography 영상을 구현할 수 있을 것으로 사료된다.

• Imaging Science in Dentistry
• /
• 제47권2호
• /
• pp.93-97
• /
• 2017

Purpose: The purpose of this study was to evaluate the accuracy of panoramic imaging in measuring the right and left gonial angles by comparing the measured angles with the angles determined using a lateral cephalogram of adult patients with class I malocclusion. Materials and Methods: The gonial angles of 50 class I malocclusion patients (25 males and 25 females; mean age: 23 years) were measured using both a lateral cephalogram and a panoramic radiograph. In the lateral cephalograms, the gonial angle was measured at the point of intersection of the ramus plane and the mandibular plane. In the panoramic radiographs, the gonial angle was measured by drawing a line tangent to the lower border of the mandible and another line tangent to the distal border of the ascending ramus and the condyle on both sides. The data obtained from both radiographs were statistically compared. Results: No statistically significant difference was observed between the gonial angle measured using the lateral cephalograms and that determined using the panoramic radiographs. Further, there was no statistically significant difference in the measured gonial angle with respect to gender. The results also showed a statistically insignificant difference in the mean of the right and the left gonial angles measured using the panoramic radiographs. Conclusion: As the gonial angle measurements using panoramic radiographs and lateral cephalograms showed no statistically significant difference, panoramic radiography can be considered in orthodontics for measuring the gonial angle without any interference due to superimposed images.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1127-1146
• /
• 2015

The excitation angle or angle of incidence is the angle in which the horizontal seismic components are applied with respect to the principal structural axes during a time history analysis. In this study, numerical simulations and parametric studies are performed for the investigation of the effect of the angle of seismic incidence on the response of adjacent buildings, which may experience structural pounding during strong earthquakes due to insufficient or no separation distance between them. A specially developed software application has been used that implements a simple and efficient methodology, according to which buildings are modelled in three dimensions and potential impacts are simulated using a novel impact model that takes into account the arbitrary location of impacts and the geometry at the point of impact. Two typical multi-storey buildings and a set of earthquake records have been used in the performed analyses. The results of the conducted parametric studies reveal that it is very important to consider the arbitrary direction of the ground motion with respect to the structural axes of the simulated buildings, especially during pounding, since, in many cases, the detrimental effects of pounding become more pronounced for an excitation angle different from the commonly examined 0 or 90 degrees.

• 정보처리학회논문지B
• /
• 제13B권2호
• /
• pp.83-88
• /
• 2006

일정한 형태의 물체를 분석하기 위해 사용되는 각-거리 그래프를 이용하여 임의의 물체의 경계선 내부 영역의 면적을 측정하는 디지털 영상처리 알고리듬을 제안한다. 물체의 경계선 내부의 한 점을 중심으로 1차 각-거리 그래프를 생성하고 이 그래프로부터 거리 값이 급격히 변화하는 위치를 추출하여 1차 그래프에서 접근하지 못한 영역을 인식하여 새 영역에서의 한 점을 중심으로 2차 각-거리 그래프를 생성한다. 물체의 형태가 복잡한 경우 차수가 증가하게 되며 이와 같이 계층적으로 구성된 각-거리 그래프 그룹에 대해 거리의 제곱을 각도 방향으로 적분하여 물체의 경계선 내부 영역의 면적을 측정한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권6호
• /
• pp.489-494
• /
• 2020

The Law method is observing the temporal bone. There are two types of methods: the double angle method, which manipulates the center ray angle of the tube twice, and the single angle method, which manipulates once. The purpose is to increase the reproducibility of the image by making vertical incidence by making an assistive device using a 3D printer. Two assistive devices with a wedge-shaped 8.5 × 10 × 2.3 cm, an inclined surface of 7.5 cm, and an inclination angle of 15° were fabricated. Assistive devices can be combined with each other in the form of grooves, and PLA (Poly Lactic Acid) is used as a material. In the first experiment, 10 examiners operated the tube 15° in the caudad direction and 15° in the anterior direction, and measured it with a protractor to conduct a reproducibility experiment. Second, two examiners acquired vertically incidence images using the existing law method and assistive devices, and measured the distance between each measurement point to evaluate the reproducibility. The tube center ray angle reproducibility experiment was not statistically significant, but the angle difference was up to 9° between examiners. The reproducibility experiment of radiographic images was not statistically significant with the conventional method, and the method using an assistive device was statistically significant. Therefore, regardless of skill level, an image capable of securing reproducibility, which is the advantage of vertical incidence, could be obtained.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.447-456
• /
• 2008

노천광산에서 사면설계는 안정성과 경제성 측면에서 동시에 접근하여 결정해야 한다. 또한 일반 도로나 철도 연변의 사면과는 달리 대부분 지보나 보강없이 굴착해야 하기 때문에 사면각도가 가장 중요한 설계 변수이다. 본 연구에서는 인도네시아 파시르에 위치한 노천채광방식의 대규모 석탄광산 사면에 대하여 안정성 측면에서의 사면 각도 및 한계사면높이를 결정하였으며 이러한 설계가 가지고 있는 불확실성을 보완할 수 있는 계측 및 계측자료 해석을 수행하였다. 연구 결과, 사면각도(Overall Elope angle) $30^{\circ}$를 유지하는 경우 안전율 1.5를 확보하는 최대개발심도는 $353{\sim}438m$로 계산되었으나 강도정수에 대한 민감도분석결과를 고려할 때 사면높이는 300m를 초과하지 않는 것이 바람직하다. 또한 변위계측자료에 대한 역변위속도 분석 결과가 현장사면 사례와 잘 일치하여 이 방법을 통해 사면의 불안정성 및 파괴시기를 대략적으로 예측할 수 있을 것으로 판단된다.