• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.224-229
• /
• 2008

In this paper, we propose an object control system on table top display to support augmented reality in which objects in real-world control computer-generated data. We developed LED-based object control system over table top display so that it is capable of controlling networked table top display. The LED-based object control system supports more natural interactive interface. In this paper, infrared LED is used to implement the object control device to be recognised by table top display. We applied LED-based object control system in air hockey game where a team has a point if their puck goes to opponent's net on a table. Since users can control objects in cyber world with the proposed object control device, it is realized augmented reality.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.145-150
• /
• 2004

The LED lighting used spot-light illuminate the limited surface. So it is a key-point to condense wide emission angle of high power light emitting diodes (LEDs) to narrow that angle. In this paper, the secondary optics was designed by lens-makers formula for concentration rays of LED into specific region. So, it simulated the optics that designed by lens makers-formula in the optical design program, LightTools. And then, show the p propriety of lens design utilizing simulation result, luminous intensity, emission angle.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.52-56
• /
• 2012

As inexhaustible clean energy, solar energy will be the most ideal green energy in the 21st century. The effective method to convert solar energy into electrical energy is by solar photovoltaic power generation technologies. LED Emitting Diode is a kind of component which can transform electricity into visible light. As the smart current control system for photovoltaic street lights, the proposed system has improved the battery charging and discharging mechanism to extend the lifespan and effectively controls the LED discharge current according to battery charge state and lighting.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.675-676
• /
• 2014

Photovoltaic (PV) systems bosed on solar energy offer an environmentally friendly source of electricity. A key feature of such PV sysem is the efficiency of conversion at which the power converter stage can extract the energy from the PV arrays and deliver to the load. The Maximum power point tracking (MPPT) of the PV output for all sunshine conditions allows reduction of the cost installation and maximizes the power output from the PV panel. The proposed algorithm is to control the width of the pulse for battery charging based on the open voltage of the PV panel. As a lab results, the proposed system was implemented functions to adapt to the changes of the PV open voltage, and improved the charging efficiency.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.3
• /
• pp.457-463
• /
• 2011

As computer related technologies are developed, interests in augmented reality technologies are greatly increasing. Augmented reality is a technology that composes digital contents from the real input images through camera and it enables interaction with users. This study designed a directional marker using LED light that emits infrared ray, then, provided a detection algorithm and a marker information extraction method that can realize various virtual objects as augmented reality from one marker. The newly designed method provides a solution to settle the problems in existing marker technologies such as decrease of immersiveness and read rate and single information expression, and at the same time it can minimize the cost or time consumption in marker information storage.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.327-338
• /
• 2004

This study was attempted to check period of a fashion cycle and to suggest its main-stream and sub-stream by analyzing the fashion trends presented in Vogue Korea between 1997 and 2002. A content analysis method was used to analyze 24 volumes. The result showed that the fashion trend of 1997's was a turning point from the simplicity, which was a trend up to 1996's, to the romanticism. The fashion trends of 2002 seemed to be also a turning point from the new-romanticism which was added the hippism to the romanticism continued from 1997, to the sporticism. The result confirmed that the main-stream of fashion theme have been continued for 5 years as a regular cycle system and could be repeated. It also verified that some sub-stream which was affected by social, cultural and political situation led the fashion changes. The results of this study could be expected to reflect not only fashion design, merchandising and marketing strategy but also consumer purchase behavior of the future.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.75-81
• /
• 2013

We fabricated translucent opal glass to replace the polycarbonate diffuser in LED lighting systems in order to solve the durability problem. Batch materials of opal glass with a composition of calcium phosphate were created and melted at $1550^{\circ}C$, and the effect of opaqueness was identified by an addition of 1~7% calcium phosphate as an opacifier raw material. As a result, translucent opal glass was obtained by the melting of the mixed batch materials with a composition of more than 5% calcium phosphate glass at $1550^{\circ}C$ for 2 hrs, which had excellent optical properties for the diffuser of a LED lighting system with no dazzling from direct light by a high haze value exceeding 90% and a low parallel transmittance value of about 5%. For the thermal properties, the thermal expansion coefficient was found to be $5.6{\sim}5.9{\times}10^{-6}/^{\circ}C$ and the softening point was $874{\sim}884^{\circ}C$. In addition, good thermal properties such as good thermal shock resistance and feasibility for use with a general manufacturing process during the forming of glass tubes and bulbs were noted. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting due to its high heat resistance and high durability as a replacement for a polycarbonate diffuser.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.650-657
• /
• 2012

For the purpose of improving the durability problem, translucent opal glass was fabricated as a substitute for the polycarbonate diffuser of LED lighting. Calcium phosphate was used as an opacifier of opal glass and melted in an electric furnace. The opaque effect was identified according to the change of the cooling procedure. As results, translucent opal glass was obtained by the melting of a batch with a composition of 3.8% calcium phosphate at $1550^{\circ}C$ for 2 hrs and then the cooling of the material in the furnace. For the cooling condition of the glass sample, HTCG (High Temperature Cooled Glass) was found to have better optical properties than LTAG (Low Temperature Annealed Glass). It had excellent optical properties for a diffuser of LED lighting, with no dazzling from direct light due to its high haze value of over 99% and low parallel transmittance value of under 1%. For the thermal properties, it had an expressed thermal expansion coefficient of $5.7{\times}10^{-6}/^{\circ}C$ and a softening point of $876^{\circ}C$; it also had good thermal properties such as good thermal shock resistance and was easy to apply to the general manufacturing process in the forming of glass tubes and bulbs. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting with high heat resistance and high durability; this material is suitable as a substitute for polycarbonate diffusers.