• 한국지리정보학회지
• /
• 제9권3호
• /
• pp.1-13
• /
• 2006

본 연구에서는 미국 EPA에서 개발된 DRASTIC 시스템을 이용하여 지하수 오염 취약성을 평가 후, 잠재오염원 자료를 이용하여 광역적인 지하수 오염 위험성을 평가하였다. 이를 위해 포항지역에 대해 지하수면의 깊이, 충진량, 대수층, 토양층, 지형경사, 수리전도도, 선구조, 잠재오염원 등 수리지질학적 자료와 현장조사를 통해 잠재오염원을 공간 데이터베이스로 구축하였다. 구축된 공간 데이터베이스를 GIS 기반으로 DRASTIC 시스템에 적용하여 광역적 지하수 오염 취약성을 평가하였으며, 지하수 오염 취약성 평가 결과와 잠재오염원의 분포를 중첩 분석하여 지하수 오염 위험성을 평가하였다. 이를 통해 지하수 오염 위험성은 대수층의 지하수 오염에 대한 취약성과 잠재오염원의 분포 정도에 따라 4가지 유형으로 분류할 수 있으며, 그 유형에 따라 적절한 지하수 수질관리의 방향을 제시할 수 있도록 하였다. 또한 그 결과는 행정구역별로 도출하여 향후 관리상의 편의를 도모할 수 있도록 하였다. 본 연구에서 도입한 지하수 오염 위험성 평가 기법은 비교적 손쉽게 기존의 지하수 오염 취약성 평가를 실제 지하수 수질관리 계획 수립 시에 활용될 수 있다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.22.2-22.2
• /
• 2009

Currently, metal silicides become increasingly more essential part as a contact material in complimentary metal-oxide-semiconductor (CMOS). Among various silicides, NiSi has several advantages such as low resistivity against narrow line width and low Si consumption. Generally, metal silicides are formed through physical vapor deposition (PVD) of metal film, followed by annealing. Nanoscale devices require formation of contact in the inside of deep contact holes, especially for memory device. However, PVD may suffer from poor conformality in deep contact holes. Therefore, Atomic layer deposition (ALD) can be a promising method since it can produce thin films with excellent conformality and atomic scale thickness controllability through the self-saturated surface reaction. In this study, Ni thin films were deposited by thermal ALD using bis(dimethylamino-2-methyl-2-butoxo)nickel [Ni(dmamb)2] as a precursor and NH3 gas as a reactant. The Ni ALD produced pure metallic Ni films with low resistivity of 25 $\mu{\Omega}cm$. In addition, it showed the excellent conformality in nanoscale contact holes as well as on Si nanowires. Meanwhile, the Ni ALD was applied to area-selective ALD using octadecyltrichlorosilane (OTS) self-assembled monolayer as a blocking layer. Due to the differences of the nucleation on OTS modified surfaces toward ALD reaction, ALD Ni films were selectively deposited on un-coated OTS region, producing 3 ${\mu}m$-width Ni line patterns without expensive patterning process.

• Environmental Analysis Health and Toxicology
• /
• 제27권
• /
• pp.12.1-12.8
• /
• 2012

Objectives: The aim of this study was to identify the health and environmental risk factors of air contaminants that influence environmental and respiratory diseases in Gyeongju, Pohang and Ulsan in South Korea, with a focus on volatile organic compounds (VOCs). Methods: Samples were collected by instantaneous negative pressure by opening the injection valve in the canister at a fixed height of 1 to 1.5 m. The sample that was condensed in $-150^{\circ}C$ was heated to $180^{\circ}C$ in sample pre-concentration trap using a 6-port switching valve and it was injected to a gas chromatography column. The injection quantity of samples was precisely controlled using an electronic flow controller equipped in the gas chromatography-mass spectrometer. Results: The quantity of the VOC emissions in the industrial area was 1.5 to 2 times higher than that in the non-industrial area. With regards to the aromatic hydrocarbons, toluene was detected at the highest level of 22.01 ppb in Ulsan, and chloroform was the halogenated hydrocarbons with the highest level of 10.19 ppb in Pohang. The emission of toluene was shown to be very important, as it accounted for more than 30% of the total aromatic hydrocarbon concentration. Conclusions: It was considered that benzene in terms of the cancer-causing grade standard, toluene in terms of the emission quantity, and chloroform and styrene in terms of their grades and emission quantities should be selected for priority measurement substances.

• 생태와환경
• /
• 제52권3호
• /
• pp.245-265
• /
• 2019

생물의 특징적인 서식공간을 나타내는 비오톱은 도시생태계의 효율적 조성 및 지속가능한 관리를 위해 필수적으로 파악되어야 한다. 본 연구는 우리나라의 대표적 공업도시인 포항시 전역에 성립한 비오톱 유형과 그 속성을 분석하여 이 도시를 생태적으로 관리하기 위한 기초자료를 제공하고자 수행하였다. 포항시에 성립한 비오톱 유형은 삼림(침엽수림, 활엽수림 및 침 활 혼합림), 경작지(논과 밭), 시설녹지 (조경수목식재지), 하천, 저수지, 나지, 주거지역, 공공시설, 상업지역, 공업지역, 도로 및 학교의 12개 유형으로 구분되었다. 비오톱 유형에 따른 속성을 분석한 결과, 도시지역을 대표하는 공업지역, 주거지역 및 상업지역에는 제한된 공간에 주로 도입된 식생이 존재하였다. 더구나 그 식생은 지역과 지소의 특성을 반영하는 자생종 보다는 조경 및 원예용으로 개발된 식물들 중심으로 이루어져 있다. 생산녹지는 도심으로부터 거리에 따라 먼 곳에는 전형적인 농경지의 형태를 나타내었지만, 인접한 곳에서는 시설농업의 형태를 나타내었다. 자연녹지는 하천을 따라 성립한 수변식생과 산림식생으로 구분되었다. 그 중 산림식생은 이차림(7개 군락)과 조림지(3개 군락)로 이루어졌다. 포항시의 도시생태계는 공업지역이 차지하는 면적이 넓고, 그 중 열오염과 이산화탄소 발생량이 높은 철강산업이 주를 이루고 있다. 반면에 녹지는 양과 질 양면에서 모두 매우 부족하다. 본 연구에서는 이러한 문제를 종합적으로 검토한 후 이 지역의 생태적 질을 높이기 위한 방안으로 녹지의 양과 질을 개선할 수 있는 식생 복원방안 및 기존 녹지와 복원 예정 녹지를 묶어내는 녹지축 네트워크화 방안을 제시하였다.

• 한국멀티미디어학회논문지
• /
• 제20권3호
• /
• pp.456-464
• /
• 2017

The epigraphy is a text on metal or a text on stone. The value of epigraphy can be used to identify historical facts of the past. It is a good record to understand the past life and culture. But it is difficult to decode the character of the epigraphy which has been exposed to the outdoor for a long time. In this study, the proposed techniques are consisted of 3 parts: (1)The surface division into information area, non- information area, and undifferentiated area. And then, (2) The selection of points in the non-information area and finding a reference plane with the minimum error. (3) Flattening the points perpendicular to the reference plane and decoding characters on information area. This research contributes to narrow the scope of a particular letter and to read the controversial letters on the Pohang Jungsoengri Silla Stone Monument(Korea's national treasure number 318).

• 동아시아식생활학회지
• /
• 제21권1호
• /
• pp.108-117
• /
• 2011

The purpose of this study was to analyze the association between educational environment (physical environment of cooking institutes and curriculum) and satisfaction with learning of students at local cooking institutes. Self-administered questionnaires were distributed to 300 student enrolled at cooking institutes located in Pohang and Gyeongju, and a total of 265 were usable. Collected data were statistically analyzed using SPSS 12.0 by frequency, factor, reliability, t-test and Duncan's multiple range test. The results can be summarized as follows. Most of the subjects were enrolled at cooking institutes to learn Korean and Western cuisine. There were significant differences in learning according to institution, facility, method and instructor. There were also significant differences in learning according to gender, age, education, and attended classes. Based on the results, the physical environment of cooking institutes contributed to learning in the students, but the operation system also needs to be improved. However, study was limited in sample size and area, the results can-not be generalized.

• Archives of Plastic Surgery
• /
• 제37권2호
• /
• pp.161-168
• /
• 2010

Purpose: Surgical approaches to the condylar neck and subcondyle area can cause some morbidity such as, facial nerve injury, time-consuming nature and external scar etc. So many surgeons hesitate using open reduction and internal fixation for the treatment of subcondylar fractures. We report open reduction and internal fixation of subcondylar fractures in 13 adult patients via transmasseteric approach. Methods: From 2007 to 2009, 13 adults with subcondylar fracture of mandible were treated with open reduction and internal fixation via transmasseteric approach. A preauricular incision was extended downwards in a curvilinear fashion in the cervicomastoid skin crease. Skin flap was elevated above the SMAS layer. Masseter muscle was splitted at the anteroinferior edge of the parotid gland. After the fracture was reduced, fixed with appropriate plates and screws. All operation were performed under general anesthesia. Results: Mean follow-up period was 13.3 months. There were no signs and symptoms of facial nerve injury, difficulty in mouth opening, or malocclusion. Dissection time was roughly within 30 minutes. Conclusion: Transmasseteric open reduction and internal fixation of mandible subcondylar fracture can be performed with excellent visualization, and inconspicuous scar. It also offers swift access to the subcondylar area while substatially reducing the risk to the facial nerve and eliminating the complications associated with transparotid approaches.

• 자원환경지질
• /
• 제23권1호
• /
• pp.59-71
• /
• 1990

Magnetic anisotropy of a total of 213 independently oriented Tertiary rock samples from Pohang-Ulsan area has been studied. The sampled strata comprise basalts, tuffs and black shale, and range in age from Eocene to Miocene. The previous palaeomagnetic studies indicate that their magnetic carrier minerals are titanomagnetites. Among 23 sampled sites, 11 sites were found to preserve magnetic load foliation parallel to the bedding plane caused by the Iithostatic load of the overlying strata. Other 4 sites showed magnetic lineation indicating the flow direction of lava and tuffs. The remaining 8 sites revealed the magnetic tectonic foliation nearly vertical to the bedding plane. This magnetic foliation is interpreted to be generated by tectonic compression which acted nearly horizontally during the solidification stage of the strata. The compression directions deduced from the tectonic foliation of the 8 sites can be grouped into internally very consistent two group: a N-S trending one and the other WNW-ESE trending one. It is interpreted that the former N-S compression was associated with the N-S spreading of the East Sea(Sea of Japan) and the dextral strike-slip movement of the Yangsan-Ulsan fault system. The latter WNW-ESE compression is interpreted to represent the folding and reverse faulting activity in the Korean and Tsushima straits during middle/late Miocene times.

• 한국지구과학회지
• /
• 제24권5호
• /
• pp.449-455
• /
• 2003

포항일대의 대기환경을 이해하고 예측의 기초정보로 활용하기 위해 기후학적 요소들에 대한 조사를 수행하였다. 분석을 통해, 포항지역의 연평균 기온, 상대습도, 강수량은 각각 14.39$^{\circ}C$, 63.3%, 1,178mm로 나타났다. 포항지역에서의 연간 탁월풍은 남서풍으로 나타났으며 평균풍속은 2.7m/s였다. 운량은 장마기간이 포함되며 지형효과에 의한 대류운이 활발하게 나타나는 여름에 많았다. 또한 연평균 일조시간은 약 2,221시간으로 나타났다.

• 대한기계학회논문집A
• /
• 제26권9호
• /
• pp.1736-1745
• /
• 2002

The objective of this study is to predict the roll wear in hot rod rolling process. In this study hot rod rolling process for round and oval passes has been investigated. In order to predict the roll wear, the wear model is reformulated as an incremental form and then wear depth of roll is calculated at each deformation step on contact area using the results of finite element analysis, such as relative sliding velocity and normal pressure at contact area. Archard's wear model was applied to predict the roll wear. To know the thermal softening of DCI (Ductile Cast Iron) roll according to operating conditions, high temperature micro hardness test is executed and a new wear model has been proposed by considering the thermal softening of DCI roll expressed in terms of the main tempering parameter curve. 3D wear program developed in this study might be used for adjusting the gap of rolls to set up a suitable rolling schedule for keeping dimensional tolerance of the product.