• Nuclear Engineering and Technology
• /
• v.55 no.5
• /
• pp.1577-1586
• /
• 2023

Safety qualification of a steam generator is a crucial issue related to faulted condition design loads, including earthquake loads, and it should be ensured that the structural integrity of a steam generator does not exceed its design load. Using data from the Gyeongju and Pohang earthquakes, the two most powerful recorded seismic events in Korea, seismic analyses of a typical steam generator are conducted in this study. The modal characteristics are used to develop an input deck for these analyses. With a time history analysis, the responses of the steam generator in the event of an earthquake are obtained. In particular, the displacement, velocity, and acceleration responses are obtained in the time domain, with these outcomes then used for a detailed structural analysis as part of the ensuing assessment. The response spectra are also generated to determine the response characteristics in the frequency domain, focusing on the response comparisons between the Gyeongju and Pohang earthquakes. Structural integrity can be ensured by performing additional analysis using results obtained from the time history analysis considering the input excitations of various earthquakes considered in the design.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.485-505
• /
• 2022

On November 15, 2017, a Mw 5.4 Pohang Earthquake occurred at about 4 km hypocenter in the Heunghae area, and caused great damage to Pohang city, Korea. In the Heunghae area, which is the central part of the Pohang Basin, the Cretaceous Gyeongsang Supergroup and the Late Cretaceous to Early Paleogene Bulguksa igneous rocks as basement rocks and the Neogene Yeonil Group as the fillings of the Pohang Basin, are distributed. In this paper, structural and geological researches on the crustal deformations (folds, faults, joints) in the Pohang Basin and the coseismic ground deformations (sand volcanoes, ground cracks, pup-up structures) of Pohang Earthquake were carried out, and the deformation history of the Pohang Basin and characteristics of the coseismic ground deformations were considered. The crustal deformations were formed through at least five deformation stages before the Quaternary faulting: forming stages of the normal-slip (Gokgang fault) faults which strike (N)NE and dip at high angles, and the high-angle joints of E-W trend regionally recognized in Yeonil Group and the faults (sub)parallel to them, and the conjugate normal-slip faults (Heunghae fault and Hyeongsan fault) which strike E-W and dip at middle or low angles and the accompanying E-W folds, and the conjugate strike-slip faults dipped at high angles in which the (N)NW and E-W (NE) striking fault sets show the (reverse) sinistral and dextral strike-slips, respectively, and the conjugate reverse-slip faults in which the NNE and NNW striking fault sets dip at middle angles and the accompanying N-S folds. Sand volcanoes often exhibit linear arrangements (sub)parallel to ground cracks in the coseismic ground deformations. The N-S or (N)NE trending pop-up structures and ground cracks and E-W or (W)NW trending ground were formed by the reverse-slip movement of the earthquake source fault and the accompanying buckling folding of its hanging wall due to the maximum horizontal stress of the Pohang Earthquake source. These structural activities occurred extensively in the Heunghae area, which is at the hanging wall of the earthquake source fault, and caused enormous property damages here.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1639-1645
• /
• 1991

Because of the important role LD converters play in the production of high quality steel, various dynamic models have been attempted in the past by many researchers not only to understand the complex chemical reactions that take place in the converter process but also to assist the converter operation itself using computers. And yet no single dynamic model was found to be completely satisfactory because of the complexity involved with the process. The process indeed involves dynamic energy and mass balances at high temperatures accompanied by complex chemical reactions and transport phenomena in the molten state. In the present study, a mathematical model describing the dynamic behavior of LD converter process has been developed. The dynamic model describes the time behavior of the temperature and the concentrations of chemical species in the hot metal bath and slag. The analysis was greatly facilitated by dividing the entire process into three zones according to the physical boundaries and reaction mechanisms. These three zones were hot metal (zone 1), slag (zone 2) and emulsion (zone 3) zones. The removal rate of Si, C, Mn and P and the rate of Fe oxidation in the hot metal bath, and the change of composition in the slag were obtained as functions of time, operating conditions and kinetic parameters. The temperature behavior in the metal bath and the slag was also obtained by considering the heat transfer between the mixing and the slag zones and the heat generated from chemical reactions involving oxygen blowing. To identify the unknown parameters in the equations and simulate the dynamic model, Hooke and Jeeves parttern search and Runge-Kutta integration algorithm were used. By testing and fitting the model with the data obtained from the operation of POSCO #2 steelmaking plant, the dynamic model was able to predict the characteristics of the main components in the LD converter. It was possible to predict the optimum CO gas recovery by computer simulation

• Fisheries and Aquatic Sciences
• /
• v.2 no.2
• /
• pp.167-171
• /
• 1999

This study was designed to develop biomarkers of coastal pollution using biochemical indices of flounder (Paralichthys olivaceus) by changes in lactate dehydrogenase (LDH) activity in the serum and cholinesterase activities in brain membranes. For this purpose acetylcholiesterase (AChE) activity, butyrylcholinesterase (BChE) activity, LDH/AChE ratio and LDH/BChE ratio of cultured flounders at 5 different sites on the southern coast of Korea were compared to those of wild flounders caught in the Pohang, eastern coast of Korea as a control group. Relatively high LDH activities were measured in the serum of flounders cultured on the southern coast of Korea (0.101-0.145 unit) than those in the Pohang control group (0.093 unit). AChE activities were significantly low $(about\;10-20\%)$ in brain membranes of cultured flounders compared to those in the Pohang control group. The ratios of LDH/AChE and LDH/BChE were consistently higher $(136-178\%,\; 155-214\%)$ in cultured flounders than those of Pohang control group. Thus, we propose that the ratios of LDH/AChE and LDH/BChE in flounders could be applicable for the diagnosis of marine pollution.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.5
• /
• pp.499-510
• /
• 2015

The purpose of this research is to identify new service opportunities for enhancing driving safety of intra-city buses based on driving behavior analysis. Service opportunity identification involves finding target customers of service (to whom), motivations for service (why), service contents (what), and service delivery process (when, where). This paper presents an analysis of driving behaviors using the operational data of intra-city buses in conjunction with traffic accident data and drivers' driving history data. This paper also presents four identified service opportunities based on the data analysis results. This research would contribute to enhancing driving safety of intra-city buses in Korea and serve as a basis for developing new services for driving safety enhancement.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2006.11a
• /
• pp.118-118
• /
• 2006

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1864-1866
• /
• 1991

We present a parameter estimator which operates in the domain of iteration sequence. The scheme can be applied to identify unknown algebraic system whose uncertainty is parametric.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2001.10a
• /
• pp.1-64
• /
• 2001

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2007.11a
• /
• pp.96.1-96.1
• /
• 2007

• Proceedings of the Korean Magnestics Society Conference
• /
• 2010.06a
• /
• pp.136-136
• /
• 2010