• Journal of Periodontal and Implant Science
• /
• 제20권1호
• /
• pp.150.1-150.1
• /
• 1990

• 지역사회간호학회지
• /
• 제13권1호
• /
• pp.68-78
• /
• 2002

This study intended to analyze the health promoting behaviors by comparing various factors according to the residence areas(Korea or Japan) of Korean Elderly. and to present basic data in planning systematic and effective programs of health promotion for each residence area. The subjects of this study were 164 Korean elders in Daegu, South Korea, and 164 elders in Aichi prefecture, Japan. Data was collected by interviews and self-administered questionnaires from the 1st to the 20th of April in 2000. The tool for this study was based on Walker et al.(1987)'s Health Promotion lifestyle Profiles (HPLP). The analysis was performed with Cronbach's $x^2-test$, t-test. ANCOVA, Kendal tau, Pearson correlation, and Stepwise Multiple Regression test using SPSS program. The results are as follows: 1. There was a significant difference in occupation($x^2$=41.3. p=0.000), the source of the pocket money($x^2$=114.36. p=0.000) by the residence areas in terms of socio-demographic characteristics. 2. There was a significant difference between the two groups on the health promoting behaviors(t=-8.19. p=0.000). The score of elders group in the South Korean group on health promoting behaviors was 2.32. showing 0.33 lower than that of the elders group in Japan(2.65). 3. ANCOVA involving occupation and the source of pocket money as co-variables. showed significant differences (F=15.37. p=0.000) regarding health promoting behaviors according to the residence areas. 4. In consideration of variables that have an influence on health promoting behavior by residence areas, pocket money occupied 11.5% of health promoting behavior in the elders group in South Korea. In the elders group in Japan, pocket money occupied 18.1% of health promoting behavior and 20.6% including education. The suggestions based on the results of this study are as follows.: 1. It is necessary to develop health promoting programs considering the residence areas of Korean elders. 2. It is necessary to develop social programs for improving the education level and solving pocket money problems, which are the significant factors for the health promoting behavior of Korean elders.

• 농촌의학ㆍ지역보건
• /
• 제33권2호
• /
• pp.181-192
• /
• 2008

Objective: The use of complementary and alternative medicine (CAM) is common especially among patients with osteoarthritis The aim of this study was to investigate the utilization rate and expenditures of patients who use CAM. Method: Two hundred seventy four patients with osteoarthritis were interviewed by a telephone survey. A structured questionnaire about sociodemographic features and type, cost, satisfaction and reason of CAM utilization was used Results: Among 274 patients with osteoarthritis, 251 patients(91.6%) had used at least one type of CAM during six months. There was a significant difference in sex (female), age (70 years), medical security (insurance), educational level between the user and non-user of CAM. Hyperthermia was the most use. The average cost for CAM utilization was 120 thousands won/person during six months and there was no difference in sociodemographic features among the out-of-pocket cost of users. The scores of satisfaction for CAM use were ranged between 60-70. Conclusions: CAM became a popular source of health care because of elderly and lay referral system. And Korean spent a substantial amount of out-of-pocket money on CAM without benefit. Health care system and professionals should pay more attention to CAM, make a evidence for CAM.

• 전자공학회논문지D
• /
• 제36D권9호
• /
• pp.21-30
• /
• 1999

OSFET 소자의 펀치스루 현상 및 문턱전압의 roll-off 방지하는 효율적 방법으로 알려져 있는 halo 포켓 이온주입방법은 MOSFET 드레인 전류의 감소를 가져온다. Halo 구조 MOSFET의 드레인 전류 감소는 보통 문턱 전압의 증가로 설명되고 있으나, 실험적으로 드레인 전류의 감소는 문턱전압의 증가로 예상된 드레인 전류 감소 보다 크게 관찰되고 있다. 본 연구에서는 halo 도핑분포에 의해서 채널방향으로 생성되는 전계분포의 효과에 의한 드레인 전류의 감소를 분석하였다. 포켓 이온주입에 의한 halo MOSFET 소자의 유효 이동도 모델을 제시하였고, 유효 이동도의 감소가 드레인 전류의 추가적인 감소에 기여함을 보였다. 제시된 모델에 따른 소자의 특성이 실험결과와 일치함을 보였다.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.28-33
• /
• 2017

Recently, the operation of precision pocket machining has been studied for the high speed and accuracy in industry to increase production and quality. Moreover, the demand for products with complex 3D free-curved surface shapes has increasing rapidly in the development of computer systems, CNC machining, and CAM software in various manufacturing fields, especially in automotive engineering. The type of aluminum (Al6061) that is widely used in aerospace fields was used in this study, and end-mill down cutting was conducted in fillet cutting at a corner with end-mill tools for various process conditions. The experimental results may demonstrate that the end mill cutter with four blades is more advantageous than that of the two blades on shape forming in the same condition precise machining conditions. It was also found that cutting forces and tool deformation increased as the cutting speed increased. When the tool was located at $45^{\circ}$ (four locations), the corner was found to conduct the maximum cutting force rather than the start point of the workpiece. The experimental research is expected to increase efficiency when the economical precision machining methods are required for various cutting conditions in industry.

• 복식
• /
• 제61권4호
• /
• pp.152-168
• /
• 2011

The purpose of this study is to develop a design prototype of outdoor-wear which is suitable for trekking. For achieving this purpose, 6 factors(bodice, sleeve, hood, pockets, opening, hem-line) considered for clothing function were selected, classified, and complemented based on the survey of literature and the research of 185 designs in 12 outdoor-wear brands. The results are as follows; The removable hood and 4DM sleeve style with the elastic band and velcro for the cuffs was the most preferred in the detail design on the brand research. And also the ventilation function and 1 or 2 diagonal in-seam pocket, covered zipper was preferred. Based on this result, two design prototypes of men's outdoor-wear for trekking were suggested; jacket 1 has a slim waist line and a hip length. Front opening has a zip and placket for windproof effect. There is a detachable hood with stopper around the head line. 4DM sleeve and elastic band inserted at the end of sleeve, so that prevent the hem-line raising. Two inseam pocket is placed slightly diagonal. Jacket 2 is a hood jacket with a york. The Jacket has a little roomier in waist and a hip length. Front opening is fastened by a waterproof zip. It has a 4DM sleeve and a princess line to make it placed two pocket which have ventilation functionality.

• Journal of Periodontal and Implant Science
• /
• 제30권1호
• /
• pp.157-168
• /
• 2000

Periodontal surgery can be directed to remove the irritants from the tooth surface and reduce the periodontal pocket. The purpose of this study is to compare the clinical effects after between modified Widman flap and modified flap in periodontal patients. Ninety six molar area teeth of 9 patients were used. One of sextants performed a modified Widman flap, while the other side performed a modified flap. After initial periodontal therapy, the following measurements prior to surgery(baseline) were taken : pocket depth, gingival recession, clinical attachment level, tooth mobility, bleeding on probing. Also these measurements were taken at 4 weeks, 8weeks, and 12 weeks after surgery. Significant decrease of pocket depth was shown in both techniques, and the degree of decrease was significant in modified flap than modified Widman flap at 12 weeks. Significant increase of gingival recession was shown in both techniques, and the degree of increase was significant in modified Widman flap than modified flap at 4 weeks, 8 weeks, and 12 weeks. Significant attachment gain was shown in both techniques, and the degree of increase was significant in modified flap than modified Widman flap at 4 weeks, 8 weeks, and 12 weeks. Significant increase of tooth mobility was shown in both techniques at 4 weeks, but the decrease of tooth mobility was shown at 12 weeks. Greater decrease of bleeding on probing was shown in both techniques at 4 weeks. Modified flap was better than modified Widman flap in the decrease of gingival recession and the attachment gain. These results indicate that modified flap operation is better than modified Widman flap operation in the effect of periodontal treatment.

• 한국환경생태학회지
• /
• 제31권2호
• /
• pp.252-265
• /
• 2017

본 연구에서는 고밀 시가화지역 내 녹지들의 경관생태학적 특성과 연결성을 분석함으로써 잠재적인 녹지패치들의 활용가능성을 평가하고, 이를 통해 생활권 내 녹지 네트워크를 형성하기 위한 도시정원의 도입 방안을 제시하고자 한다. 이를 위해, 서울시에서 공원 서비스 소외지역 및 중점녹화지구로 분류된 역삼동 일대를 대상지로 선정하였다. 우선, 대상지 일대 고밀 시가화지역 내 녹지의 현황을 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 5개 항목으로 분류하여 파악하고, 녹지 네트워크 분석 및 잠재적 녹지의 가치를 평가하기 위하여 FRAGSTATS를 통한 경관지수 분석 및 다중버퍼생성분석을 통한 연결성평가를 실시하였다. 연구결과, 대상지 내 녹지면적은 가로녹지, 개인정원, 자투리공지, 공원, 옥상정원의 순으로 분포되어 있었다. 녹지의 유형별 특징으로는 가로녹지의 경우 핵심지역면적(TCA)이 $1,618m^2$로 가장 높은 값을 보여 선형 연결 녹지임에도 공원($1,128m^2$)에 상응하는 크기를 보였고, 개인정원의 경우 패치의 모양이 불규칙하면서도(ED=78.1m/ha), 최근린 평균거리가 33.9m로 낮아 사유지내에서의 자유로운 정원조성을 통해 고밀 시가화지역의 녹지군을 형성할 수 있음을 나타내었다. 자투리공지의 경우 대상지 내 가장 고루 분포하는(LPI=5.7%, SHEI=0.9) 녹지유형이나 외부교란에 노출되어 있어($TCA=66m^2$), 이를 고려한 정원으로의 활용방안을 시사하였다. 대상지 내 녹지네트워크 형성에 있어서도 50m의 버퍼 범위를 연결녹지로 상정한 경우 전체 대상지의 84%가 소규모 녹지네트워크에 의해 커버되는 것으로 나타났으며, 자투리공지의 연결만으로도(27%) 가로녹지(26%) 조성에 상응하는 네트워크 구축효과가 기대되었다. 이에, 주택지역을 중심으로 다양한 활동이 가능한 자투리 공공녹지에 지역기반의 커뮤니티 가든 등 도시정원 조성을 장려하고, 가로녹지, 개인정원, 옥상정원도 동시에 적극 활용함으로써 고밀 시가화지역 내에 녹지네트워크를 효과적으로 구축할 수 있다고 판단되었다.

• Archives of Plastic Surgery
• /
• 제34권6호
• /
• pp.792-795
• /
• 2007

Purpose: Scoliosis is a multifactorial disorder caused by genetic, biochemical, developmental, neuromuscular factors and causes complex deformities which include skeletal deformity, pain, cardiovascular dysfunction, motor function disorder. Until now, the treatment of scoliosis have been focused on orthopedic correction, preservation of cardiopulmonary and neurologic function. But recently, as aesthetic demands increases, the needs for the correction or improvement of the trunk and extremity contour does. So, the correction of soft tissue contour deformity can be a new concept for the treatment of scoliosis. Methods: We corrected a deformed contour with prefabricated silicone implant in a scoliosis patient who had been operated for orthopedic correction previously. Submuscular pocket was made under trapezius and latissimus dorsi muscle. Silicone implant was placed in the pocket and fixed to thoracolumbar fascia with sutures. Results: We had a satisfactory results for the correction of contour deformity. There was no significant complication. Conclusion: Silicone implant is a new trial for the correction of scoliosis contour deformity. This method is simple, safe and brings on satisfactory results.

• Journal of Microbiology and Biotechnology
• /
• 제18권2호
• /
• pp.328-333
• /
• 2008

A series of pep tides binding to the HCV NS5B polymerase was selected from phage display peptide libraries. A conserved motif of Ser-Arg-X-Arg/Leu was identified among the selected peptides, and Pep2 (Trp-Ser-Arg-Pro-Arg-Ser-Leu) was chosen for further characterization. The binding of Pep2 to HCV NS5B in vivo was shown by a yeast two-hybrid assay and by subcellular colocalization analysis using immunofluorescence confocal microscopy. The in vitro interaction was also confirmed by GST pulldown assay. The replication of the HCV 1b subgenomic replicon was efficiently inhibited by the presence of the peptide. By using a subtractive biopanning against Pep2, the binding site of the peptide was mapped at the pocket of Pro388 to Pro391 in the thumb subdomain of the polymerase. A yeast two-hybrid analysis using Pro388Ala and Pro391Ala mutants of NS5B confirmed the binding.