• Title/Summary/Keyword: Po

Search Result 4,218, Processing Time 0.028 seconds

A Study of Calcium Phosphate Crystal Phases Prepared from Oyster Shells (굴 껍질로부터 제조된 calcium phosphate 결정상에 관한 연구)

  • Ryu, Su Chak
    • Korean Journal of Materials Research
    • /
    • v.13 no.4
    • /
    • pp.246-250
    • /
    • 2003
  • Calcium phosphate was prepared by chemical reaction formula using Oyster shells and $H_3$$PO_4$solutions. After added to 0.1 M∼0.9$ M H_3$$PO_4$ solution for oyster shell, prepared powders were investigated for heating properties and formation phase with heat treatment temperatures. As the results of XRD analysis of heated powders at $500^{\circ}C$$1200^{\circ}C$,$ CaCO_3$ phases were observed at the temperature of below 900 TEX>$^{\circ}C$ and in the condition of 0.1 M∼0.9 M $H_3$$PO_4$ solutions. However, $CaCO_3$, $CaPO_3$(OH) and $Ca_3$($PO_4$)$_2$ phases were appeared at the temperature range between $500∼900^{\circ}C$ and in the solution of 0.7 M to 0.9 M $H_3$$PO_4$. $Ca_{ 5}$($PO_4$)$_3$(OH) and CaO phases due to the decarbonation of oyster shells($CaCO_3$) were appeared at above $1000^{\circ}C$ and in the solution of below 0.5 M $H_3$X$PO_4$. However in the case of above 0.7 M $H_3$$H_4$ solutions, $Ca_{5}$ ($PO_4$)$_3$(OH) was decomposed into $Ca_3$($PO_4$)$_2$ at more higher 100$0^{\circ}C$. Thus $Ca_3$(X$Ca_4$)$_2$ phases were appeared at higher than 100$0^{\circ}C$.

Synthetic Characteristics of AlPO$_4$-5 Molecular Sieve (AlPO$_4$-5 분자체의 합성 특성)

  • Sung Hwa Jhung;Suk Bong Hong;Young Sun Uh;Hakze Chon
    • Journal of the Korean Chemical Society
    • /
    • v.37 no.10
    • /
    • pp.867-873
    • /
    • 1993
  • Influences of crystallization time and $H_2O/Al_2O_3$ ratio of the reaction mixtures on the synthesis of AlPO$_4$-5 molecular sieve have been studied by X-ray powder diffraction, nitrogen adsorption, scanning electron microscope (SEM), and solid state $^{27}$Al magic angle spinning nuclear magnetic resonance (MAS NMR) techniques. The degree of crystallinity of AlPO$_4$-5 follows a sigmoid pattem as crystallization time increases. The induction period is shorter than 1 h when the crystallization process is carried out at 150$^{\circ}$C. The conversion of reactants to product, AlPO$_4$-5, can be clearly observed, and all of the determined physical properties change abruptly after about 2 h. It is found that increase in $H_2O/Al_2O_3$ ratio of the reaction mixtures not only changes the crystal morphology from aggregates to hexagonal single crystals, but also results in the formation of longer AlPO$_4$-5 crystals.

  • PDF

Effect of Na3PO4 Concentration on the Formation Behavior and Properties of PEO Films on AA2024 (알루미늄 2024 합금의 플라즈마 전해산화 피막의 형성 거동 및 피막 물성에 미치는 인산나트륨 농도의 영향)

  • Kim, Juseok;Shin, Heon-cheol;Moon, Sungmo
    • Journal of the Korean institute of surface engineering
    • /
    • v.53 no.6
    • /
    • pp.351-359
    • /
    • 2020
  • Formation behavior and properties of PEO (Plasma Electrolytic Oxidation) film on AA2024 were investigated under application of pulsed current as a function of Na3PO4 concentration in 0.05 M Na2SiO3 solution by analyzing voltage-time behavior, in-situ observation of arc generation, observation of surface morphology and measurements of thickness and surface roughness. Arc generation voltage decreased with increasing Na3PO4 concentration. Color difference of PEO films between edge and inner part disappeared by addition of Na3PO4. It was also observed that size of nodules on PEO film decreased with increasing Na3PO4 concentration. Thickness of PEO films formed on AA2024 increased with increasing Na3PO4 concentration. Whereas, surface roughness of PEO films decreased with increasing Na3PO4 concentration up to 0.05 M of Na3PO4 which is attributed to the deceased size of nodules on the PEO films. However, the surface roughness increased with increasing Na3PO4 concentration more than 0.07 M of Na3PO4 which seems to be due to the formation of non-uniform PEO films with smooth surface and large size pores formed by orange-colored big arcs. The experimental results suggest that added sodium phosphate less than 0.2 M in an alkaline silicate solution can contribute to the formation of relatively thick and uniform thickness of PEO films under arc generation voltage lower than 300 V.

A Study of Performance Analysis on Effective Multiple Buffering and Packetizing Method of Multimedia Data for User-Demand Oriented RTSP Based Transmissions Between the PoC Box and a Terminal (PoC Box 단말의 RTSP 운용을 위한 사용자 요구 중심의 효율적인 다중 수신 버퍼링 기법 및 패킷화 방법에 대한 성능 분석에 관한 연구)

  • Bang, Ji-Woong;Kim, Dae-Won
    • Journal of Korea Multimedia Society
    • /
    • v.14 no.1
    • /
    • pp.54-75
    • /
    • 2011
  • PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

Electrical conductivity of olivine type LiFe0.965Cr0.03B0.005PO4 and LiFe0.965Cr0.03Al0.005PO4 powders (올리빈형 LiFe0.965Cr0.03B0.005PO4 and LiFe0.965Cr0.03Al0.005PO4 분말의 전기전도도)

  • Kim, Chang-Sam
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.20 no.3
    • /
    • pp.141-146
    • /
    • 2010
  • $LiFePO_4$ doped with Cr showed improved electrochemical properties as a cathode material of lithium-ion batteries compared to the undoped. The improvement was thought that the doping would raise the electronic conductivity of the compounds. The electrical conductivity of $LiFe_{0.965}Cr_{0.03}B_{0.005}PO_4$ and $LiFe_{0.965}Cr_{0.03}Al_{0.005}PO_4$ powder was measured in the temperature range from 30 to $80^{\circ}C$. The doped powders were synthesized via mechanochemical milling and subsequent heat treatment at 675~$750^{\circ}C$ for 5~10h. The doping enhanced grain growth and electrical conductivity. The electrical conductivity of the $LiFe_{0.965}Cr_{0.03}Al_{0.005}PO_4$ powder at $30^{\circ}C$ was $1{\times}10^{-8}S/cm$, which was higher two orders of magnitude than that of the undoped.

[ $^{210}Po$ ] Accumulation in the Pelagic Community of Yongil Bay, Korea (영일만 표영군집내의 $^{210}Po$ 축적)

  • SUH Hae-Lip;KIM Seong-Soo;GO You-Bong;NAM Ki Wan;YUN Sung Gyu;YOON Yang-Ho;JO Soo-Gun;HONG Jae-Sang
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.28 no.2
    • /
    • pp.219-226
    • /
    • 1995
  • A study was made of the concentration of the naturally occurring radionuclide $^{210}Po$ in seawater, plankton and fishes collected from Yongil Bay, Korea, in summer 1993. The mean value of the $^{210}Po$ concentration in sea water was determined to be about 1.9 mBq/l, with the proportion of the dissolved forms being about $46\%$. The mean $^{210}Po$ concentration factor in the centric diatom Skeletonema costatum, comprises > $95\%$ of the total phytoplankton cell number, was $7.6\times10^4$. Of five species of zooplankton examined, four species (two copepods and two mysids) had $^{210}Po$ concentrations in the range of $^{210}Po$ mBq/g dry weight. A copepod Labidocera bipinnata, however, was exceptional with a particularly high $^{210}Po$ level of 2,070 mBq/g. This indicates that L. bipinnata is primarily a raptorial feeder. The concentration of $^{210}Po$ in the pyloric caecum of pelagic fishes was 2,979-3,811 mBq/g, with the concentration factors of $3.4-4.3\times10^6$. The food chain concentration of $^{210}Po$ occurred as follows: phytoplankton < filter feeding copepods < omnivorous mysids < raptorial copepod < pelagic fishes.

  • PDF

Optical spectroscopy of Tb3+ ions doped NaCa(PO3)3 phosphors (Tb3+ 이온이 첨가된 NaCa(PO3)3 형광체의 형광특성)

  • Yoon, Changyong
    • Journal of the Korean Society of Radiology
    • /
    • v.12 no.4
    • /
    • pp.451-457
    • /
    • 2018
  • Luminescence properties of $NaCa(PO_3)_3$ doped with $Tb^{3+}$ ions are investigated by optical and laser excitation spectroscopy. The phosphors were prepared by solidstate reaction method The X-ray diffraction(XRD) was used to analyze the crystal structure and the crystallinity of the samples. The excitation and emission spectra and decay curve of $NaCa(PO_3)_3:Tb^{3+}$(0.01 ~ 30mol%) were measured at room temperature. The f - d band of $Tb^{3+}$ is observed in the excitation spectra of $NaCa(PO_3)_3:Tb^{3+}$ in the wave length region 205 ~ 245 nm. Strong emission lines due to the $^5D_4{\rightarrow}^7F_J$ transition and weak emission lines due to the $^5D_4{\rightarrow}^7F_J$ transition are observed in the emission spectra of $NaCa(PO_3)_3:Tb^{3+}$. The energy transfer and cross relaxation between $Tb^{3+}$ ions are discussed in $NaCa(PO_3)_3:Tb^{3+}$ in the emission spectra and life time.

Defect Structure and Electrical Conduction Mechanism of Yttrium Sesquioxide (산화이트륨의 결함구조 및 전기전도 메카니즘)

  • Kim, Keu-Hong;Park, Sung-Ho;Choi, Jae-Shi
    • Journal of the Korean Chemical Society
    • /
    • v.28 no.3
    • /
    • pp.149-154
    • /
    • 1984
  • The electrical conductivity of p-type yttrium sesquioxide has been measured as a function of temperature and of oxygen partial pressure at temperatures from 650 to 1050$^{\circ}C$C and oxygen partial pressures from $1 {\times}10^{-5}\;to\;2{\times}10^{-1}$atm. Plots of log conductivity vs. 1/T at constant oxygen partial pressures are found to be linear with low-and high-temperature dependences of conductivity. The high-temperature dependence of conductivity shows two different defect structures. The plots of log conductivity vs. log $Po_2$ are found to be linear at $Po_2$'s of $10^{-5}\;to\;10^{-1}$ atm. The electrical conductivity dependences on $Po_2$ are found to be ${{\sigma}{\propto}Po_2}^{1/6}$at $850{\sim}950^{\circ}C,\;{{\sigma}{\propto}Po_2}^{3/16}$ at $950{\sim}1050^{\circ}C\;and\;{{\sigma}{\propto}Po_2}^{1/7.5}{\sim}{{\sigma}{\propto}Po_2}^{1/8.3}\;at\;650{\sim}800^{\circ}C$, respectively. The defect structures are$O_i{''}$ at $850{\sim}950^{\circ}C$ and $V_M{'''}$ at $950{\sim}1050^{\circ}C$. The electron hole is main carrier type, however, ionic contribution is found at lower temperature portion.

  • PDF

Germination of Carrot, Lettuce, Onion, and Welsh Onion Seeds as Affected by Priming Chemicals at Various Concentrations (당근, 상추, 양파 및 파 종자 발아촉진을 위한 Priming 약제 종류와 농도에 따른 효과)

  • Jeong, Yeon-Ok;Kang, Seong-Mo;Cho, Jeoung-Lai
    • Horticultural Science & Technology
    • /
    • v.18 no.2
    • /
    • pp.93-97
    • /
    • 2000
  • This study was conducted to determine the appropriate osmotic priming chemicals and their concentrations to improve germination of carrot, lettuce, onion, and Welsh onion seeds. Each chemical, including $KNO_3$, $KH_2PO_4$, $K_3PO_4$, NaOH, $Ca(NO_3)_2$, and PEG 8000, was tested at three to four concentrations. Percent germination, number of days to attain 50% of the final germination percentage (T50), and mean number of days to germination (MDG) of primed seeds were compared with those of water-imbibed or nonprimed seeds. With the exception of 100 or 200 mM NaOH, other priming chemicals did not affect percent germination of carrot and lettuce seeds. However, the chemical priming did reduce T50 and MDG, especially with -0.5 MPa PEG 8000 for carrot and with 50 mM $K_3PO_4$ or 200 mM $KH_2PO_4$ for lettuce. Among the chemicals with no influence on percent germination did 200 mM $KH_2PO_4$ significantly reduced both T50 and MDG of onion seeds. No chemicals improved percent germination of Welsh onion seeds. Reduction in T50 and MDG was significant only with $KH_2PO_4$ and $Ca(NO_3)_2$.

  • PDF

A Design of Test Equipment for Battery Automatic Charging-Discharging Control Using LabVIEW (LabVIEW를 이용한 배터리 자동 충·방전 제어 테스트 장치 설계)

  • Park, Byeong-Ju;Moon, Chae-Joo;Jeong, Moon-Seon;Park, Ji-Ye;Kim, Yi-Yoon;Kim, Yeong-Jung
    • Proceedings of the KIPE Conference
    • /
    • 2011.07a
    • /
    • pp.559-560
    • /
    • 2011
  • 최근 전기자동차와 신재생에너지 발전 시스템의 전기 저장장치로 고용량 2차 전지의 개발 및 상용화가 활발히 이루어지고 있으며, 기술 연구 또한 꾸준히 진행되고 있다. 배터리에 대한 활용도가 높아지면서 배터리의 성능평가에 대한 관심도 높아지고 있다. 본 논문에서는 LabVIEW를 이용하여 배터리 자동 충 방전 제어 테스트 장치를 구축하여, 원격제어 및 실시간 모니터링을 통해 데이터 분석 및 저장이 가능하며, 다양한 배터리의 성능평가를 설정 값 변경으로 손쉽게 평가 할 수 있도록 장치를 개발 하였다.

  • PDF