• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.716-721
• /
• 2001

The present study describes the experimental method to measure the strain of tire. In this study. the strain distributions of tire with air pressure and vertical load were measured at the bead filler edge region and on the carcass cord using strain gauges and the results were compared with indoor bead durability test results. The strain amplitude of carcass cord near the rim check line of tire is one of the main factors that affects bead durability characteristic.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.79-85
• /
• 2010

This paper presents a preliminary study of roller types for chip seals based on aggregate retention performance. Chip seal test sections composed of single seals of granite 78M aggregate and CRS-2 emulsion were constructed using three different roller types: the pneumatic tire roller, steel wheel roller, and combination roller. In order to investigate the performance of these rollers effectively, it is critical to test chip seal samples obtained directly from field construction. Therefore, test sections were constructed on New Sandy Hill Church Road near Bailey, North Carolina. Chip seal samples obtained from these sections were used for laboratory testing. The aggregate retention performance was evaluated using the flip-over test (FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3). Based on the test results and visual observation, both the pneumatic roller and the combination roller used together are recommended to improve chip seal performance with the sequence of the pneumatic roller rolling first followed by the combination roller.

• Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.33-39
• /
• 2011

The vibration characteristic of tires is one of very important issues which heavily affect the noise and comfort on driving. Therefore, when the new tire is designed, the vibration characteristic of tire should be considered. In this paper, the vibration characteristic of non-pneumatic tire is investigated for geometric of NPT which is designed by cell angle of spoke. The analysis is based on the finite element method and used ABAQUS program, which is able to non-linear analysis. The material of NPT is used for the Ogden energy model, which is model of hyperelastic material. This paper investigate natural frequency and modal of NPT and compare result of NPT with it of pneumatic tire.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.12a
• /
• pp.36-41
• /
• 1998

• Elastomers and Composites
• /
• v.5 no.1
• /
• pp.62-68
• /
• 1970

The physical properties of tire and tube products as a series of experiments have been studied and practical usage has been discussed. 1. The tensile strength and elongation of experimental production of tire and tube revealed better values than those found in requirements of military specification. 2. Adhesion of carcass plies with domestic and foregin cords showed good results in physical properties. 3. Tensile strength of carcass plies, tenacity of domestic cord and breaking energy of tire be exhibited good results.

• Elastomers and Composites
• /
• v.5 no.2
• /
• pp.188-194
• /
• 1970

We have studied to apply of a quantity of SBR contained high and domestic tire cord on manufacture tire. The Physical test of compounds and products, the travelling test of manufactured tires last year had revealed a good results. 1. The physical properties indicated better values than those found in the requirments of military specification. 2. Adhesion of carcass ply cord showed a good results. 3. The physical properties between 1260 d/2 nylon cord and 840d/2 nylon cord of domestic products be showed similar values and its have a results by 2-3 times than standards.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.804-808
• /
• 2005

A pneumatic tire is made up of many flexible filaments of high modulus cord of natural textile, synthetic polymer, glass fiber, or fine hard drawn steel embedded in and bonded to a matrix of low modulus polymetric material. Adhesion property of these materials is very important in tire durability safety because belt-leaving-belt tread separation reduces the ability of a driver to control a vehicle, whether or not the separation is accompanied by a loss of air. In this study adhesion test of carcass-belt-tread is conducted on material properties of 5 PCR tire model, which are on sale in domestic market and analyzed adhesion properties. For those tire models FMVSS 109 indoor high speed durability test is conducted to analyze the correlation between adhesion force and high speed performance of tires and found the correlation between the two test results.

• Elastomers and Composites
• /
• v.4 no.1
• /
• pp.83-88
• /
• 1969

As a part of a series of previous studies, physical properties of various portions of a tire made of NR-Syn. R bloods were studied. 1. It was found, in general, most effective for tire tread when 50 parts of HAF black was blended with NR and Syn. R with a ratio of 70/30. 2. It was found that the use of SBR 1712 has an advantage in price, easy processing and physical properties than other synthetic rubber. 3. A technical compounding of various portions of a tire has to be determined for optimum cure conditions.

• Elastomers and Composites
• /
• v.4 no.1
• /
• pp.89-93
• /
• 1969

1. Physical properties of various nylon cords in a tire, both of home and foreign products are studied. The experimental data for home nylon cords appeared to be quite satisfactory for use in a tire compared with foreign nylon cords with respect to its tenacity, elongation, shrinkage and contraction. 2. Excellent results have been obtained with 50 phr carbon in butyl-carbon compounding.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.41-50
• /
• 2021

This study investigated the changes in engineering characteristics of sand-tire chip mixtures during repetitive loading. To quantify the changes in the maximum shear modulus according to the tire chip content in the mixtures and the particle size ratio between sand particle and tire chip, the samples were prepared with tire chip content of TC = 0, 10, 20, 40, 60, and 100%, and the particle size ratios SR were also set to be SR = 0.44, 1.27, 1.87, and 4.00. The stress of the prepared sample was applied through a pneumatic cylinder. The experiment was conducted in the order of static loading (= 50 kPa), cyclic loading (= 50-150 kPa), static loading (= 400 kPa) and unloading. The stress applied to tested mixtures was controlled by a pressure panel and a pneumatic valve by using an air compressor. The shear wave velocity was measured during static and cyclic loadings by installing bender elements at the upper and lower caps of the mold. The results demonstrated that the change in maximum shear modulus of all tested materials with varying SR during repetitive loading is the most significant when TC ~ 40%. In addition, the mixture with smaller SR at a given TC shows greater increase in maximum shear modulus during repetitive loading.