• 대한의용생체공학회:의공학회지
• /
• 제26권6호
• /
• pp.393-398
• /
• 2005

An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.26-36
• /
• 2013

Purpose of this study is to develop virtual components and environment for developing a controller of an Active Air Suspension System in laboratory that slough off existing development environment using real vehicle test. This paper presents an air spring modeling and analysis of air suspension system for a commercial vehicle. Preferentially, It was performed vehicle test for pneumatic system and an air spring for characteristic analysis of system. Each component of an air spring suspension system was developed through emulations and modeling of system for pressure and height sensors in the basis on test results in SILS environment. Non-linear characteristics of air spring are accounted for using the measured data. Also, pressure and volume relations for vehicle hight control is considered. After performance verification of virtual model was performed, we developed virtual environment based on HILS for an Active Air Suspension System. We studied estimation and verification technology for control algorithm that developed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.508-511
• /
• 2008

The most landing gear use oleo-pneumatic shock strut to absorb the impact energy during touchdown. The shock strut is composed of the oil damper and the gas spring, especially the oil damper provides resistance force which is proportional to the square of landing speed. In case of high landing speed, the abnormal peak load can be occurred and transferred to the airframe structure. To prevent this, the pressure-relief valve is used to limit the damping force under the specific level. In this paper, it is presented the design process to find optimal damping and analysis results using pressure-relief valve.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.84-87
• /
• 2002

The plunger speed of solenoid actuator is affected by mass of plunger magnetic motive force. inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this paper, we performed the FEM analysis for non-magnetic ring which is used for increasing attraction force and plunger speed by concentration of effective magnetic flux, and also performed simulation for dynamic characteristics of plunger. And, we proved the propriety of these by experiments.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.53-59
• /
• 2001

A screw driver is widely used in assembling machine parts or electronic products such as the printed circuit board with a housing. As the parts to be assembled becomes small and precise, the higher precision of the controlling screw driver torque is required. However, because the operator controls the fastening torque based on experience, it must be inexact and the setting procedure will be time consuming job. Thus the screw driver which can exactly control the fastening torque is developed utilizing a bellows in this paper. The bellows is expanded by the inner air pressure and contracted by the spring operation. The bellows type driver is composed of a clutch mechanism with two solenoid valves and a pressure sensor. Those valves are controlled using the detected bellows pressure by the sensor. When the pressure reaches the setting value, the exit solenoid valve is opened to release the air pressure from the bellows so as not to deliver further torque. Through a series of experiments, the performance is examined and verified.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2010년도 정기 학술대회
• /
• pp.480-483
• /
• 2010

착륙장치는 완충장치를 이용하여 항공기 착륙 시의 충격을 흡수하는 역할을 한다. 여러 방식의 완충장치가 있으나, Oil에 의한 감쇠력과 Gas에 의한 스프링력을 이용하여 에너지를 흡수하는 유공압 방식이 가장널리 사용되고 있다. 착륙장치 성능해석에서는 다양한 착륙조건에 대한 Dynamic simulation을 통해 최적의 Orifice 형상과 Gas spring 특성을 결정하고, 설계에 필요한 착륙하중을 구하게 된다. 이 논문에서는 상용 프로그램인 VI-Aircraft를 이용한 착륙장치 성능해석 과정을 소개한다. 유공압 완충장치의 모델링 및 Landing simulation 결과를 분석하고, 이에 따른 완충효율 최적화 과정을 제시한다.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.303-311
• /
• 2013

본 논문은 복잡한 제어장치 없이 비교적 간단한 마찰식 메카니즘을 이용하여 약물 주입량을 정확하게 제어할 수 있는 공압식 약물주입기 구동장치의 해석과 설계를 다룬다. 다물체 해석 기법을 적용하여 약물주입기의 모델을 구성하였고, 이에 대한 동역학 해석을 통해서 구동 메카니즘의 형상, 스프링강성, 마찰특성 등과 관련된 여러 가지 설계인자들이 약물주입성능에 미치는 영향을 분석하여 이를 시제품 설계에 반영하였다. 약물주입기가 100만회 사용에 대한 내구성을 평가하기 위한 내구시험을 실시하였고, 100만회 구동 후 약물주입기의 변위와 초기상태의 변위를 비교하여 제안한 메카니즘이 충분한 내구성을 가지고 있음을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제12권4호
• /
• pp.9-15
• /
• 1987

The vibrational characteristics of a radial-ply (155SR13 4PR) and a biased-ply tire (6.15-134PR) were investigated for examining the effects of tires with different structure on the ride characteristics of the vehicle. The natural frequencies at the tread band, mode shapes, and damping factors of two tires at the state of plane vibration were determined experimentally. The test work was performed at four levels of the inflation pressure, ranging from 171.7 kPa to 245.2 kPa, and three levels of the vertical load, deviating by 10% from the standard load designated by the Department of Transportation of the United States of America. The following results were drawn by the analysis of the test results: 1. The first-order natural frequencies of the radial-ply and the biased-ply tires at the tread band were 112 Hz and 159 Hz, respectively, at the state o f the free vibration when the inflation pressure of 196.2 kPa was applied. It was known that the biased-ply tire has higher resonant frequency than the radial-ply tire and the natural frequencies of the both tires move to the high frequency range as t he inflation pressure is increased. 2. The vibration modes of both tires were quite different. No big difference in mode shapes was examined as the inflation pressure was increased. But the natural frequencies of two tires were changed. For the radial-ply tire, no difference in mode shape was found whether the vertical load was applied or not. But a significant difference in mode shape was examined for the biased-ply tire. 3. Any difference was not found in damping factor as the different inflation pressures were applied. 4. When no vertical load was applied, damping factors of the radial-ply and biased-ply tire at the state of the natural vibration ranged from 2.6 to 5.9%, and from 4.1 to 7.8%, respectively. It was estimated that the radial-ply tire would have better cushioning than the biased-ply tire since the vertical spring rate of the radial-ply tire was much less than that of the biased-ply tire, even though the damping effect of the radial-ply tire was smaller than that of the biased-ply tire.

• 한국항공우주학회지
• /
• 제37권8호
• /
• pp.812-818
• /
• 2009

산화제 개폐밸브는 일반적으로 공압으로 포핏을 열고 닫음으로써 로켓엔진에 액체산화제유량을 제어한다. 상용되는 산업용 밸브와는 달리 현재 개발 중인 산화제 개폐밸브는 밸브는 효과적인 기밀을 위해 피스톤과 포핏이 접촉되어 있을 뿐, 분리되어 설계되어졌다. 밸브가 닫히는 동안 피스톤과 포핏이 떨어져서 움직이는 것을 피하고, 밸브의 전반적인 작동 성능을 파악하기 위해서 힘평형 해석이 수행되었다. 또한 더욱 정확한 해석을 위해, 마찰력과 포핏에 작용하는 힘을 각각 시험과 CFD 해석을 통해 구해내었다. 해석 결과를 통해 힘평형 해석에서 스프링, 마찰력과 공압부의 오리피스 크기와 같은 중요한 설계인자들의 영향을 알아보았으며, 현재 개발 설계중인 산화제 개폐밸브의 작동성능을 확인하였다.

• 한국대기환경학회지
• /
• 제4권2호
• /
• pp.20-27
• /
• 1988

A simple two stage aerosol filter sampler which allows simultaneous and fractional collection of two different-size particles, coarse and fine, was constructed and applied to the collection of Seoul atmospheric particulate for inorganic analysis. The sampler consist of two 47-mm diameter filter holder, a pneumatic pump, and a flowmeter. Filtering rate normally runs around 20$\ell$/min for 8 hrs. Using the sampler, a series of seasonal aerosol samples were collected from June 1986 to March 1988 at Yonsei University campus, Seoul and subsequently analysed for ten environmentally important metals using an atomic absorption spectrometer and an inductively coupled plasma emission spectrometer. The analysed metals are Al, Cd, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn. The analytical results showed the following order of metal abundance; Al > Fe > Zn > Pb > Mn > Cu > V > Ni > Cr > Cd. Based upon their size distribution pattern, the analyzed matals could be clasified into two groups, those present primarily in coarse particle and those in fine particle. Fe, Al, Mn, V, and Cr belong to the former group while the rest to the latter. Most metal concentration were highest in spring or winter, and lowest in autumn. Statistical analysis showed strong correlations between Al and Fe, Pb and Zn, and Cu and Mn.