• 제목/요약/키워드: Plywood

검색결과 343건 처리시간 0.033초

목재수피 파티클의 흡음율과 음향투과손실 (Sound Absorption Rate and Sound Transmission Loss of Wood Bark Particle)

  • Kang, Chun-Won;Jang, Eun-Suk;Jang, Sang-Sik;Kang, Ho-Yang;Kang, Seog-Goo;Oh, Se-Chang
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권4호
    • /
    • pp.425-441
    • /
    • 2019
  • 목재수피의 음향성능을 파악하고자 6가지 수종의 목재수피를 삭편으로 절삭하여 몇 가지 비중조건과 두께로 만든 후 흡음율과 음향투과손실을 전달함수법과 전달행렬법으로 각각 측정하였다. 그 결과, 편백나무수피가 두께 100 mm 일 때의 100-6400 Hz 평균흡음율은 0.90이며 두께 50 mm 일때의 100-6400 Hz 평균흡음율은 0.84이다. 특히 두께 100 mm 일 때의 경우, 1 KHz의 주파수영역에서의 흡음율은 약 100%에 근접하는 높은 흡음율을 나타내었다. 음향투과손실은 측정주파수범위에서 편백나무수피는 500 Hz에서 15.30 dB의 투과손실을 나타내었고 1000 Hz 수치는 15.73 dB이었다. 10 mm 두께의 합판을 수피파티클 배면에 추가한 후에는 투과손실이 20-30 dB 증가하였다. 목재수피는 친환경적이면서 기존의 석고보드보다 흡음율이 높고 음향투과손실이 크게 나타나서 음향성능이 우수한 건축재료로 고려될 수 있다고 생각된다.

현무암 섬유 보강 폴리우레탄폼의 열적 성능 및 극저온 환경에서의 기계적 특성 평가 (Evaluation of Thermal Performance and Mechanical Properties in the Cryogenic Environment of Basalt Fiber Reinforced Polyurethane Foam)

  • 전성규;김정대;김희태;김정현;김슬기;이제명
    • 대한조선학회논문집
    • /
    • 제59권4호
    • /
    • pp.207-213
    • /
    • 2022
  • LNG CCS which is a special type of cargo hold operated at -163℃ for transporting liquefied LNG is composed of a primary barrier, plywood, insulation panel, secondary barrier, and mastic. Currently, glass fiber is used to reinforce polyurethane foam. In this paper, we evaluated the possibility of replacing glass fiber-reinforced polyurethane foam with basalt fiber-reinforced polyurethane foam. We conducted a thermal conductivity test to confirm thermal performance at room temperature. To evaluate the mechanical properties between basalt and glass-fiber-reinforced polyurethane foam which is fiber content of 5 wt% and 10 wt%, tensile and an impact test was performed repeatedly. All of the tests were performed at room temperature and cryogenic temperature(-163℃) in consideration of the temperature gradient in the LNG CCS. As a result of the thermal conductivity test, the insulating performance of glass fiber reinforced polyurethane foam and basalt fiber reinforced polyurethane foam presented similar results. The tensile test results represent that the strength of basalt fiber-reinforced polyurethane foam is superior to glass fiber at room temperature, and there is a clear difference. However, the strength is similar to each other at cryogenic temperatures. In the impact test, the strength of PUR-B5 is the highest, but in common, the strength decreases as the weight ratio of the two fibers increases. In conclusion, basalt fiber-reinforced polyurethane foam has sufficient potential to replace glass fiber-reinforced polyurethane foam.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

부분(部分) 등분포(等分布) 전단하중(剪斷荷重)을 받는 이방성(異方性) 구조체(構造體)의 해석(解析) (Analysis of Orthotropic Body Under Partial-Uniform Shear Load)

  • 장석윤
    • 대한토목학회논문집
    • /
    • 제4권1호
    • /
    • pp.1-10
    • /
    • 1984
  • 본(本)논문(論文)은 재료(材料)의 성질(性質)이 직교(直交)하는 방향(方向)으로 상이(相異)한 이방성(異方性) 구조체(構造體)에 부분등분포(部分等分布) 전단하중(剪斷荷重)이 경계(境界)에 작용(作用)할 경우의 수직응력(垂直應力)과 전단응력(剪斷應力)을 나태내는 엄밀해법(解法)을 제시(提示)하였다. 이 해법(解法)은 평형조건(平衡條件)과 적합조건(適合條件)을 동시에 만족하는 탄성론적(彈性論的)인 엄밀 해법(解法)이다. 따라서 이러한 문제(問題)를 해석(解析)하기 위하여 Airy 응력함수(應力凾數)를 이용(利用)하였다. 본해법(本解法)의 타당성(妥當性)을 증명(證明)하기 위하여 이방성(異方性)인 경우의 방정식(方程式)들의 이방성상수(異方性常數)들을 등방성(等方性)인 경우의 상수(常數)들로 대치(代置)할 경우에 등방성(等方性)인 경우의 방정식(方程式)들로 변환(變換)되지 않으면 안된다. 이를 검토(檢討)하기 위하여 L'hospital의 법칙(法則)을 이용하였다. 그 결과(結果) 이방성(異方性)인 경우의 모든 방정식(方程式)들은 등방성(等方性)인 경우의 방정식(方程式)들로 정확히 변환(變換)되었고 이 식들은 이미 연구된 자료(資料)의 값들과 비교(比較)된 결과(結果) 정확히 일치(一致)되었다. 또한 집중하중(集中荷重)의 경우와의 관계(關係)에서는 부분등분포하중(部分等分布荷重)의 특별(特別)한 경우가 집중하중(集中荷重)임을 고려하고 L'hospital의 법칙(法則)을 이용(利用)하면 부분등분포하중(部分等分布荷重)의 경우의 방정식(方程式)들은 바로 집중하중(集中荷重)의 경우의 방정식(方程式)들로 변환(變換)됨을 알 수 있다. 본 결과(結果)로 미루어 보아 해법(解法)의 타당성(妥當性)이 입증(立證)되었다고 할 수 있다. 본해법(本解法)의 방정식(方程式)들은 간단(簡單)한 형태(形態)로 구성(構成)되어 있어 수치결과(數値結果)를 정확히 누구나 얻을 수 있는 장점이 있다. 응력(應力)의 값을 나타내는 수치결과(數値結果)를 이방성재료(異方性材料)인 3단합판(合板)과 중첩합판을 예로 들어 나무결을 2가지 방향(方向)으로 강축(强軸)을 바꾸어 각각의 수직(垂直) 및 전단응력(剪斷應力)을 구(求)하여 도표(圖表)로 표시(表示)하였으며, 그 결과 응력(應力)의 분포(分布)는 재료(材料)의 성질과 강축(强軸)의 방향(方向)에 따라 현저하게 달라지는 현상을 볼 수 있다.

  • PDF

집결시간(集結時間)이 합판접착강도(合板接着强度)에 미치는 영향(影響) (The Effect of Variation of Assembly Time on Glue Bond Strength)

  • 심종섭
    • Journal of the Korean Wood Science and Technology
    • /
    • 제10권3호
    • /
    • pp.118-131
    • /
    • 1982
  • 1. 이 연구(硏究)는 Yale대학교(大學校) 임과대학목재이학교실(林料大學木材利學敎室)에서 최근(最近) 새로히 쓰기 시작(始作)한 phenolic resin의 일종(一種)과 soy-bean glue 1auxein 10-B에 대(對)하여 assembly time의 변동(變動)이 제작(製作)된 합판(合板) shear strength에 어떠한 영향을 주는가를 알고 또한 그의 비교적(比較的) 적당(適當)한 실질적(實質的)인 assembly time의 범위를 결정(決定)하기 위하여 실시(實施)된 것이다. 2. 이 연구(硏究)에서 쓴 단판은 동실험실(同實驗室)에 실험용재료(實驗用材料)로 비치(備置)된 1/22in. 너도 밤나무(beech) 단판을 사용(使用)하였으며 수지는 phenolic resin U.S.P. low temperature liguid resorcinol type 와 Lauxein No. 10-B cold press water - resistant soygule 등으로 실험용(實驗用) sample을 구입(購入)하여 사용(使用)하였다. 3. 실험용(實驗用) ply-wood는 삼합식(三合式)으로 실험(實驗)을 하게 된 assembly time의 variation은 일분(一分)에서 시작(始作)하여 5, 10. 15, 25, 35, 50, 70분(分)등으로 8개(個)의 variation이 있게 하고 assembly 법(法)으로는 open assembly와 closed assembly의 2법(法)으로 하였으며 제작(製作)된 ply-wood의 성질비교(性質比較)는 dry test와 wet test의 shear strength test를 통(通)하여 나타나는 shear strength와 목파율을 가지고 하였다. 4. assembly time의 variation에 따른 합판의 shear strength와 목파율은 Table 1. 2. 3. 4에 표시(表示)된 바와 같은 결과(結果)를 보였으며 phenolic resin을 갖이고 closed assembly 법(法)으로 제작(製作)된 합판의 wet test를 제외하고는 모두 assembly time이 증가(增加)됨에 따라 shear strength와 목파율은 감소(減少)되여 가는 경향(傾向)을 보이고 있다. 그리고 실질적(實質的)으로 유효(有效)한 assembly time의 범위는 다음 표(表)(8)과 같다. 5. 이 실험(實驗)을 하는 동안 친절(親切)한 충고(忠告)와 지도편달(指導鞭達)를 애끼지 않고 도와주신 Yale 대학교(大學校) 목재이용학교수(木材利用學敎授) Dr. F.F.Wangaard씨(氏)와 Prof. Hess a. 그리고 실험실(實驗室) 담임자(擔任者)인 Mr. Clanch씨(氏)에게 충심(衷心)으로 사의(謝意)를 표시(表示)한다.

  • PDF

니키 드 생 팔의 트라우마를 통해 살펴본 아상블라주와 사격회화의 양면적 특성 (A Study on the Ambivalent Characteristic Displayed in Niki de Saint Phalle's Assemblages and Shooting Paintings by Looking Into Her Trauma)

  • 유가은
    • 미술이론과 현장
    • /
    • 제6호
    • /
    • pp.77-99
    • /
    • 2008
  • The purpose of this study is to show that the reason behind the ambivalent characteristic displayed in Niki de Saint Phalle's works is in her trauma and how such characteristic can be extracted from her works. During her creative years, Saint Phalle worked on various materials from different genres such as assemblages, shooting paintings, a series on Bride and Monster, 'Nana', 'Tarot Garden'and public sculptures. One commonality found among her various works is the ambivalent characteristic that contains contrasting elements simultaneously. Saint Phalle suffered a terrible psychological damage inflicted by her parents during her childhood. Specifically, she was sexually assaulted by her father and emotionally neglected by her mother, the trauma that affected her for the rest of her life. As a result, she came to develop extreme love- hate relationships with her parents and this became the main reason for the ambivalent characteristic displayed in her works. The love-hate relationship Saint Phalle developed can be identified through various researches done on the subject of the affect of sexual assault. It is common for incest victims to develop ambivalent feelings towards the perpetrator and Saint Phalle was no exception. Dissociation disorder and a snake well explain the trauma from her father. It is a generally accepted belief in the field of psychology that dissociation disorder commonly occurs to children who experience incest. And dissociation disorder is similar to the characteristic of ambivalence in the sense that a single entity contains more than two contrasting elements at the same time. In addition, the amputated doll objects used in her assemblages coincide with the expression of body detachment of people with dissociation disorder. These facts clearly indicate that the trauma from her father is showing through in her works. A snake is a subject matter that reflects the ambivalent tendency of Saint Phalle that resulted from her trauma. She remembers her father's rape as an image of a snake which is related to a phallic symbol in mythology or art reflecting her trauma. Moreover, she displays a similar pattern of ambivalent emotion like love and hate or fear towards a snake and her father. This is also confirmed by her portrayal of a snake as a monster or reversely as a creature with fundamental vitality in her works. The lack of affection from her mother can be explained by her mother's maternal deprivation. It appears that Saint Phalle's mother possessed all the causes for maternal deprivation such as maternal separation, personality disorder and inappropriate attitude towards child rearing. Especially, a study that shows mother's negative attitude towards child breeding tends to increase dissociation experience of children is another important evidence that supports Saint Phalle's dissociation tendency. These traces of Saint Phalle's trauma are clearly revealed in her assemblages and shooting paintings. The violent objects in her assemblages such as a hammer, razor, nail represent the rage and defensiveness towards her father. The objects such as fragments of broken plates of feminine patterns, pots and mirrors that her mother used symbolize the affection towards her mother. On the other hand, the destructed objects can be interpreted as her hate and resentment towards her mother. Shooting paintings contain her extreme fury and hate. Things such as acts of shooting and the image associated with blood after shooting are blunt expressions of her bursts of emotions. I have tried to define and classify the ambivalent characteristics shown in her assemblages and shooting paintings as hate, rage, violence, calm, love and pleasure according to the frame of Thanatos and Eros. Out of the six, hate, rage, violence and clam are associated with Thanatos while love and pleasure are associated with Eros and they correspondingly form an ambivalent structure. These ambivalent characteristics can be found in her assemblages and shooting paintings. The objects in her assemblages such as a razor, saw, hammer imply hate, rage, violence and the silence felt throughout her works represent calmness. And, as mentioned, the feminine objects can be seen as symbolizing love. In shooting paintings, hate, rage, violence can be found in the use of force and in the traces of watercolor after shooting, and a sense of pleasure in her feelings of catharsis after her shooting. Moreover, a shielded calmness can be found on the plywood all covered with plaster before the shooting. This study looked into the ambivalent characteristic of Saint Phalle's works by examining her trauma to find its correlation, and a meaning of this study can be found from the fact that it refocused the origin of Saint Phalle who is generally known as a feminist artist. Additionally, a meaning of the study can be found also from the fact that it examined the ambivalent characteristics of her works through a frame of Thanatos and Eros.

  • PDF

소나무와 리기다소나무를 사용하여 제조한 목재펠릿의 품질 특성 비교 (Comparison of Quality Characteristics of Woodpellet Manufactured from Pinus densiflora S. et Z. and Pinus rigida Mill)

  • 서준원;이응수;강찬영;김시백;윤용한;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제43권3호
    • /
    • pp.374-380
    • /
    • 2015
  • 목질 바이오매스 자원의 효율적 에너지화 방안의 일환으로 소나무와 리기다소나무를 목재펠릿으로 만들고, 그 특성을 조사하였다. 제조된 목재펠릿의 함수율, 발열량, 회분, 겉보기밀도, 내구성, 원소분석을 측정하여 비교하였다. 소나무와 리기다소나무 목재펠릿의 원소분석의 결과, 소나무는 61.42% (C), 수소 5.56% (H), 산소 32.87% (O) 그리고 0.15% (N)로 나타났으며, 리기다소나무는 61.03% (C), 수소 5.96% (H), 산소 32.83% (O) 그리고 0.18% (N)로 나타나 두 수종 간에 거의 차이가 없었다. 각 시료의 발열량은 약 19 MJ/kg로서 품질규격 1급((${\geq}18.0MJ/kg$)을 만족시켰다. 회분량의 경우 소나무가 0.50%, 리기다소나무가 0.53%로 양자 간의 차이가 거의 없었으며, 품질규격 1급(${\leq}0.7%$)을 만족시켰다. 겉보기 밀도는 소나무 펠릿의 경우 $648kg/m^3$으로 품질규격 1급(${\geq}640kg/m^3$)을 만족시켰으나, 리기다소나무의 경우 $622kg/m^3$으로 품질규격 2급(${\geq}600kg/m^3$)을 만족시켰다. 함수율의 경우 두 수종 모두 품질규격 1급(${\leq}10%$)를 만족시켰으며, 내구성의 경우 소나무 목재펠릿은 품질규격 3급(${\geq}95%$)를 만족시켰으나 리기다소나무 목재펠릿은 내구성 품질규격을 만족시키지 못하였다.

제조업 산업장의 소음 작업환경 실태에 관한 조사 연구 (A Survey on the Status of Noisy Working Environment in Manufacturing Industries)

  • 김준연;김병수;이채언;전진호;이종태;김진옥
    • Journal of Preventive Medicine and Public Health
    • /
    • 제19권1호
    • /
    • pp.16-30
    • /
    • 1986
  • 산업장내의 소음작업 환경개선과 소음폭로 근로자에 대한 효과적인 청력 보호대책을 마련할 기초작업의 일환으로 1985년 4월부터 7월까지의 4개월간 부산시내 12개 제조업종 56개 산업장을 대상으로 작업공정을 파악하고 소음발생 작업공정별 소음수준을 측정하여 얻은 성적은 다음과 같다. 1) 평균 소음수준이 가장 높은 산업장은 선박건조 및 수선업(95.6dB(A))이었고, 다음으로는 철강압연업(94.0dB(A)), 자동차 제조업(93.1dB(A)), 어망 제조업(92.9dB(A)), 섬유제품 제조업(92.5dB(A)), 주조업 (89.3 dB(A)), 금속제품 제조업(89.1dB(A)), 수산물 처리 가공업(87.0dB(A)), 고무제품 제조업(85.3dB(A)), 합판 제조업(84.9dB(A)), 페인트 제조업(84.5 dB(A))의 순이었다. 2) 총 50개 조사대상 소음공정 가운데 21개 공정(42%)의 평균 소음수준이 1일 8시간 소음폭로 허용기준(90 dB(A))을 초과하였다. 3) 전 주파수역 평균음압(A특성)에 대한 1일 소음폭로 허용시간은 선박건조 및 수선업의 코킹과 철강압 연업의 도금(CGL) 공정이 30분으로 가장 짧았고, 다음으로는 자동차 제조업의 조립 (리벳트)공정이 1시간, 섬유 제조업의 직조와 선박건조 및 수선업의 숏트, 기계, 배관공정이 2시간의 순이었다. 4) 평균 음압수준이 90dB(A)를 초과한 작업공정에 대한 소음의 주파수 분석에서 모든 공정 공히 2,000Hz 혹은 4,000Hz의 음압이 가장 높았다. 5) 산업장의 소음수준 평가시 전 주파수역(overall)음압의 측정 역시 주파수 분석에 못지 않은 방법의 하나로 인지되었다.

  • PDF

요소수지(尿素樹脂)와 토란접착제(土卵接着劑) 혼용(混用)이 합판(合板)의 접착력(接着力)에 미치는 영향(影響) (Effects of UF Resin and Taro Adhesive Mixture on Plywood Bonding Strength)

  • 이필우;박헌
    • Journal of the Korean Wood Science and Technology
    • /
    • 제12권1호
    • /
    • pp.3-10
    • /
    • 1984
  • 본(本) 연구(硏究)는 토란분말(土卵粉末) 및 밀가루 분말(粉末)을 알카리와 반응(反應)시켜 제조(製造)한 접착제(接着劑)를 합판용(合板用)으로 개발(開發)코저 실시(實施)하였다. 토란(土卵) 및 밀가루 접착제(接着劑) 대(對) 요소수지(尿素樹脂)의 비(比)를 각각(各各) 0:100, 10:90, 20:80, 30:70, 40:60, 50:50, 60:40, 80:20, 100:0으로 혼합(混合)하여 합판접착(合板接着)에 적용(適用)하였으며 또한 비교실험(比較實驗)을 위하여 요소수지(尿素樹脂)에 대한 통상적(通常的)인 증량방법(增量方法)인 밀가루 분말(粉末) 대(對) 요소수지(尿素樹脂)와의 증량비(增量比)를 10:90, 20:80, 30:70, 40:60, 50:50으로 혼합(混合)한 접착제(接着劑)로 합판(合板)을 제조(製造)하여 그 접착력(接着力)을 비교(比較) 분석(分析)하였다. 토란접착제(土卵接着劑)에 요소수지(尿素樹脂)를 30:70의 비(比)로 혼합(混合)한 것이 상태(常態) 및 내수접착력(耐水接着力)에서 가장 우수한 토란접착제(土卵接着劑)에 요소수지(尿素樹脂)를 혼합(混合)하여 제조(製造)한 합판(合板)의 상태접착력(常態接着力)은 혼합비(混合比) 60:40 까지는 같은 혼합비(混合比)의 밀가루 접착제(接着劑)를 혼합(混合)한 것과 밀가루 분말(粉末)을 증량(增量)한 것보다 높은 값을 나타냈다. 밀가루 접착제(接着劑)에 요소수지(尿素樹脂)에 혼합(混合)한 합판(合板)의 상태접착력(常態接着力)은 밀가루 분말(粉末)을 증량(增量)한 것과 비교(比較)하여 혼합비(混合比) 20:80(밀가루 접착제(接着劑) : 요소수지)까지는 비슷한 값을 보이다가 혼합비(混合比) 30:70에서부터는 높은 값을 나타내고 있다. 토란접착제(土卵接着劑) 및 밀가루 접착제(接着劑)를 요소수지(尿素樹脂)에 혼합(混合)한 합판(合板)의 내수접착력(耐水接着力)은 혼합비(混合比) 40:60(토란(土卵) 및 밀가루 접착제(接着劑) : 요소수지(尿素樹脂)) 까지는 밀가루 분말(粉末)을 증량(增量)한 것보다 훨씬 높은 값을 나타내었다. 토란접착제(土卵接着劑)를 혼합(混合)한 것은 밀가루 접착제(接着劑)를 혼합(混合)한 것과 비교(比較)하여 전혼합비(全混合比)에서 높은 내수접착력(耐水接着力)을 보였다. 밀가루 분말(粉末)을 직접(直接) 증량제(增量劑)로 가용(使用)한 것보다 알카리와 반응(反應)시켜 만든 토란접착제(土卵接着劑) 및 밀가루 접착제(接着劑)를 혼합(混合)한 것이 상태(常態) 및 내수접착력(耐水接着力)을 상당(相當)히 증진(增進)시킬 수 있었는데 이것은 제조(製造)된 접착제(接着劑) 자체(自體)가 접착성(接着性)을 갖기 때문에 나타난 결과(結果)로 생각된다.

  • PDF

선박소음에 관한 연구 -방음실에 의한 소음제어효과실험- (THE STUDY ON THE NOISE IN THE VESSEL -Effect of the Noise Control by the Noise Arresting Rooms-)

  • 박중희
    • 한국수산과학회지
    • /
    • 제9권3호
    • /
    • pp.215-221
    • /
    • 1976
  • 1976년 6월 10일부터 동년 8월 30일까지 본학 해양과학 연구소 하층 실험실에서 실험하였고 1975년 6월 7일에서 동년 8월 11일까지 약 2개월 동안에 풍양호, 척양호, 관악산호 등의 선박소음을 녹음한 테프로서 재생방음한 것을 음원으로 이용하였다. 이때 소음제어의 효과를 찾기 위해 A,B,C,D형의 실험용 직육면체인 방음실을 제작하여 실험실내에 배치하고 기관실소음과 발진기에 스피커를 연결해서 방음된 음압이 각방음제어실에 투과되는 음압 100분률과 또 각 방음제어실내에서 같은 조건으로 방음되는 경우에 자재와 형상이 다른 방음실내부 구조물에 따른 흡음효과를 조사 비교한 결과를 요약하면 다음과 같다. 1. 소음투과율은 실험실 외부음압이 60dB 일때 A형은 $69.7\%$였고 계속 10dB 증가함에 따라 $3.3\%$씩 증가하였고 D형에서는 $53.9\%$인 것이 10dB 증가함에 따라 $4.5\%$씩 증가했다. 2. 실험실인 외부음압이 100dB일 때 A,B,C,D형의 음압투과율은 81.6, 78.9, 75.3, $71.0\%$의 순으로 D형의 투과율이 낮아서 방음실로서는 D형이 가장 좋았다. 3. 대화에 지장이 없는 소음압은 75dB 이하이므로 A,B형을 제외하고 C,D형은 선박소음 제어실로서 유효했다. 4. 방음제어실내부 구조에 따른 흡음효과를 A,D형에서 비교하면 A형은 발진음일 때 거리 20cm에서 82dB로 가장 높고 80cm에서 76dB로 가장 낮았으며 100cm에서 77dB였고 140cm에서 78dB 정도 다시 증가해 반사음 현상이 일어났다. D형은 발진음일 때 거리 20cm에서 A와 같이 82dB였는데 80cm에서 72.5dB, 100cm에서 73dB, 140cm서에는 67dB로 A보다 12dB가 낮았다. 선박소음도 거리 20cm에서 A형은 77.5dB, D형은 77dB였는데 140cm에서는 A형이 74dB, D형이 63dB로 11dB의 차이로 D형이 낮아 역시 흡음효과가 A형 보다 D형이 좋았고 완벽한 무향실로서 반사음의 영향은 찾아 볼 수 없었다. 5. 매우 낮은 발진음일 때 흡음관계를 1000Hz를 기준삼아 보면 거리 20cm에서 C형은 44.7dB, D형은 45.4dB로 C형이 0.3dB로 악간 낮았으나 140cm에서 C,D형 모두가 44.3dB로서 같았다. 값싼 자재로서도 C형이 가장 흡음효과가 좋았다.

  • PDF