• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.1-8
• /
• 1976

One of the most common needle leaf species used in planting in Korea is korean pine (Pinus koraiensis S. et Z.), and jack pine (Pinus banksiana Lamb.) is one of the test species for suitability. The relation of nursery bed density of 2-1 korean pine and 1-1 jack pine was studied at the Kwang Nung Nursery, Central Branch Station of Forest Research Institute, and about 40km north of Seoul. Nursery bed density of 2-1 korean pine, which ranged from 36 to 324 trees per square meters and of 1-1 jack pine, which ranged from 25 to 169 trees per square meters, had a marked effect on caliper, height, dry weight and percent and amount of plantable stock. The soil physical and chemical properties is silt plus clay, 50.55 percent; organic matter, 2.09 percent; total nitrogen, 0.13 percent; available phosphorus, 253.25 ppm; exchangeable potash, 0.46 m.e/100g; and pH, 5.58. As the density of the nursery seedling stand of 2-1 korean pine increases, the average tree height increases (Fig. 1A), but in 1-1 jack pine density do not affect to increase or decrease the average tree height. As the density of nursery bed increases, the average stem caliper (at 2cm above ground line) and dry weight decrease (Fig. 1B), but the decreasing rate is more seriously in 1-1 jack pine than 2-1 korean pine (Fig.5). As increasing the density of nursery bed, the T/R ratio of trees of the test species increase. Also the dry weight of leaf, stem and root parts are decreasing in proportion to the increase of stand density, but the drop rate of jack pine is more rapid than korean pine (table. 1) The patent facts of difference of growth characteristics between 2-1 korean pine and 1-1 jack pine were studied. These facts should be used to select the scale of stand density at the nursery bed or the plantable site. Korean pine is demanded high density, on the other hand in jack pine low density are more suitable to manage the stand density. Stands of comparatively low density had the greatest percentage of high-quality stock, and the stands of high density had less than the high quality trees of low density. An important criterion of the best density is percent and number of high-quality trees produced per square meter of bed area. Stem caliper and stem height of seedling is used in most public nurseries to sort seedling into plantable grades. The stock grade standard has set at 4.5mm caliper and 16cm height of 2-1 korean pine as the minimum desired stem caliper and height. By the result studies, the plantable stock grade standards of 2-1 korean pine used at stem height 16cm and stem caliper 4.5mm from public nurseries should be reformed to stem height 18cm and stem caliper 4.0mm by the growth characteristics and the tree distribution of stem height and caliper of relation to density. For the 2-1 korean pine, best density should be about 160 to 200 trees per square meter according to soil fertility. For the 1-1 jack pine, the suitable standard of plantable stock should be at stem height 25cm and caliper 6mm (at 2cm above ground line) and best density was about 100 to 120 trees.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.46-56
• /
• 2012

Benthic macroinvertebrates were investigated in Hoeongseong Lake region from March to October 2010, Korea. Macroinvertebrate communities, composition of the functional feeding groups, habitiat oriented groups and the biological water quality were assessed above and below Hoeongseong Dam in the lake region. Six sites, two (St.1~2) above the lake, two (St. 3~4) into the lake, and two (St. 5~6) below the dam, were selected for quantitative (Surber sampler $30cm{\times}30cm$, mesh size 0.2 mm) and qualitative (Hand net) samplings of benthic macroinvertebrates. As a result, a total of 83 species belonging to 43 families, 17 orders, 8 classes, and 5 phyla were recognized. The EPT-group (50 spp. : 60.24%) that is major taxa or EPT-group plus Diptera (61 spp. : 73.49%) occupied most of benthic macroinvertebrates community. Based on quantitative sampling, the number of benthic maroinvertebrates above the lake was 2,399 individuals including 54 species, 28 families, 11 orders, 4 classes, and 4 phyla, whereas 510 individuals including 16 species, 12 families, 7 orders, 4 classes, and 3 phyla in the lake and 626 individuals including 62 species, 33 families, 13 orders, 6 classes, and 4 phyla below the dam were collected respectively. Dominance index was the highest, with 0.82-0.93 ($0.87{\pm}0.05$) in Hoeongseong lake (St. 3-4), diversity index was 3.04-3.16 ($3.10{\pm}0.06$), evenness index was 0.79-0.85 ($0.82{\pm}0.03$), and richness index was 7.27-8.52 ($7.90{\pm}0.63$), which were relatively higher below the dam sites. In the functional feeding groups, collector-gatherers and collector-filterers were the highest in the whole sites, and predators (Micronecta sedula) was appeared highly in the lake. Moreover, swimmers, burrowers, and clingers were considerably occupied in all collecting sites. The result of the DCA, similarity analysis, and MRPP were well reflective of the composition of lake and stream macroinvertebrates. ESB indicate that the lake sites were evaluated heavily polluted under priority improvement waters. Also, Semisulcospira gottschei, Ecdyonurus kibunensis, Epeorus pellucidus, Rhoenanthus coreanus, Stenelmis sp., and Cheumatopsyche brevilineata are considered as an indicator species above and below Hoeongseong Lake, whereas Macrobrachium nipponense and Micronecta sedula are indicated in the lake.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.385-392
• /
• 2009

This study was conducted to reclassify Namweon series, black volcanic ash soils, in Jeju Island based on the second edition of Soil Taxonomy : A Basic System of Soil Classification for Making and Interpreting Soil Surveys. Morphological properties of typifying pedon of Namweon series were investigated and physicochemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Namweon series has black (10YR 2/1) silt loam Ap horizon (0~11 cm) and black (10YR 2/1) silt loam BA horizon (11~72 cm). Bw horizon (72~100 cm) is very dark brown (10YR 2/2) silt loam. That occurs on lava plain derived from volcanic ash materials. The typifying pedon contains 5.2~6.4% oxalate extractable (Al + 1/2 Fe), over 85% phosphate retention, and lower bulk density than $0.90Mg\;m^{-3}$. Ap, BA, and Bw horizons of the pedon have andic soil properties. That can be classified as Andisol. The typifying pedon has an udic soil moisture regime and has a 1,500 kPa water retention of 15% or more on air-dried samples throughout all horizons, and can be classified as Udand. Ap and BA horizons (0~72 cm) have a color value, moist, and chroma of 2 or less, melanic index of 1.70 or less, and 6% or more organic carbon. That meets the requirements of melanic epipedon. That keys out as Melanudand. That has more than 6.0% organic carbon and the colors of mollic epipedon throughout a layer 50 cm or more thick within 60 cm of the mineral soil surface.. Thus, that keys out as Pachic Melanudand. The pedon has a fine-earth fraction that has a water content at 1,500 kPa tension of 12% or more on air-dried samples and has less than 35% (by volume) rock fragments. Thus, the substitute for particle-size class is medial. That has a sum of 8 times the Si (percnt by weight extracted by acid oxalate) plus 2 times the Fe (percnt by weight extracted by acid oxalate) of 5 or more, and 2 times the Fe is more than 8 times the Si. Thus, the mineralogy class is ferrihydritic. Namweon series can be classified as medial, ferrihydritic, thermic family of Pachic Melanudands, not as ashy, thermic family of Typic Melanudands.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.230-236
• /
• 2010

Jeju Island is a volanic island which is located about 96 km south of Korean Peninsula. Volcanic ejecta, and volcaniclastic materials are widespread as soil parent materials throughout the island. Soils on the island have the characteristics of typical volcanic ash soils. This study was conducted to reclassify Jeju series based on the second edition of Soil Taxonomy and to discuss the formation of Jeju series in Jeju Island. Morphological properties of typifying pedon of Jeju series were investigated, and physico-chemical properties were analyzed according to Soil survey laboratory methods manual. The typifying pedon has dark brown (10YR 3/3) silt clay loam A horizon (0~22 cm), strong brown (7.5YR 4/6) silty clay BAt horizon (22~43 cm), brown (7.5YR 4/4) silty clay Bt1 horizon (43~80 cm), brown (7.5YR 4/6) silty clay loamBt2 horizon (80~105 cm), and brown (10YR 5/4) silty clay loam Bt3 horizon (105~150 cm). It is developed in elevated lava plain, and are derived from basalt, and pyroclastic materials. The typifying pedon contains 1.3~2.1% oxalate extractable (Al + 1/2 Fe), less than 85%phosphate retention, and higher bulk density than 0.90 Mg $m^{-3}$. That can not be classified as Andisol. But it has an argillic horizon from a depth of 22 to 150 cm, and a base saturation (sum of cations) of less than 35% at 125 cm below the upper boundary of the argillic horizon. That can be classified as Ultisol, not as Andisol. Its has 0.9% or more organic carbon in the upper 15 cm of the argillic horizon, and can be classified as Humult. It dose not have fragipan, kandic horizon, sombric horizon, plinthite, etc. in the given depths, and key out as Haplohumult. A hoizon (0~22 cm) has a fine-earth fraction with both a bulk density of 1.0 Mg $cm^{-3}$ or less, and Al plus 1/2 Fe percentages (by ammonium oxalate) totaling more than 1.0. Thus, it keys out as Andic Haplohumult. It has 35% or more clay at the particle-size control section, and has thermic soil temperature regime. Jeju series can be classified as fine, mixed, themic family of Andic Haplohumults, not as ashy, thermic family of Typic Hapludands. In the western, and northern coastal areas which have a relatively dry climate in Jeju Island, non Andisols are widely distributed. Mean annual precipitation increase 110 mm, and mean annual temperature decrease $0.8^{\circ}C$ with increasing elevation of 100m. In the western, and northern mid-mountaineous areas Andisols, and non Andisols are distributed simultaneously. Jeju series distributed mainly in the western and northern mid-mountaineous areas are developed as Ultisols with Andic subgroup.

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.16-24
• /
• 2009

Although leaf characters are important in soybean [Glycin max (L.) Merr.] breeding and development of cultural methods, very little information has been reported. The objectives of this study were to evaluate and analyze the relationships among leaf characters and suggest possible classification criteria for cultivating and wild (Glycin soja Sieb. & Zucc.) soybeans. Total of 94 cultivating and 91 wild soybean accessions from the Soybean Germplasm Laboratory of Chungbuk National University were used for this study. Central leaflet of the second leaf from the top of the plant was selected to measure leaf characters. Average leaf length, leaf width, leaf area, leaf shape index (LSI) of cultivating and wild soybeans were 12.3$\pm$1.25 cm and 6.6$\pm$1.35 cm, 6.8$\pm$1.241 cm and 2.9$\pm$0.92 cm, 55.6$\pm$15.75 $cm^2$ and 14.3$\pm$7.83 $cm^2$, and 1.9$\pm$0.38 and 2.4$\pm$0.53, respectively. Based on LSI, three categories of leaf shape, i.e., oval, ovate and lanceolate, were defined as LIS$\leq$2.0, LSI 2.1~3.0 and 3.1$\leq$LSI, respectively. Percentage of oval, ovate and lanceolate leaf types among cultivating and wild soybean accessions were 78.7%, 17.0% and 4.3 %, and 40%, 15.4% and 4.4%, respectively. Based on leaf length, three categories for cultivating, i.e. short leaf ($\leq$11.0 cm), intermediate (11.1~13.0 cm), and long (13.1 cm$\leq$), and four categories, i.e. short ($\leq$5.0 cm), intermediate (5.1~7.0 cm), long (7.0~9.0 cm), and very long (9.1 cm$\leq$) for wild soybeans were defined. Short, intermediate and long leaf types were about 1/3, 1/2 and 1/6, respectively, in cultivating soybeans, and 15.4%, 40.7% and 39.5%, plus 4.4% of very long leaf type in wild soybean. Cultivating and wild soybeans had leaf thickness, leaf area ratio (LAR), angle and petiol length of 0.25$\pm$0.054 mm and 0.14$\pm$0.032 mm, 40.1$\pm$8.22 and 53.7$\pm$12.02, $37.6{\pm}5.89^{\circ}$ and $54.6{\pm}10.77^{\circ}$, and 23.9$\pm$5.89 cm and 5.9$\pm$2.33 cm, respectively. There were highly significant positive correlations between leaf length and leaf width, and negative correlation between LSI and leaf width both in cultivating and wild soybeans. Although leaf area showed significant correlations with leaf length, leaf width and LIS in cultivating soybeans, wild soybeans showed no significant relationships among these characters. In general, soybeans with oval, ovate and lanceolate leaves were significantly different in leaf width and thickness. Cultivating soybean with oval leaf had greater leaf area, while wild soybeans with oval or ovate leaf had longer petiol than with lanceolate leaf.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.