• Title/Summary/Keyword: Plus energy rate

Search Result 66, Processing Time 0.022 seconds

Effect of the Carbon sources on the Synthesis of phosphate compounds and Respiratory activity of Yeast (saccharomyces uvarm) during growth phases (효모의 배양시기에 따른 인산화합물의 합성 및 효흡능에 미치는 탄수원의 영향)

  • 이종삼;조선의;이기성;신홍기;최영길
    • Korean Journal of Microbiology
    • /
    • v.19 no.2
    • /
    • pp.63-77
    • /
    • 1981
  • The growth rate of yeast population (Saccharomyces uvarum) cultivated in the Knopp's modified medium (plus various carbon sources) appeared the highest value when the Knopp's minimal medium was treated to 1.5% with disaccharide such as maltose and sucrose. Also the treatment of lactose and raffinose resulted in polulation growth as to the population size in case of maltose and sucrose. However, the gorwth of yeast was not occurred at all when a polysaccharide, such as inulin, was added as carbon source. The growth from of yeast population in Knopp's modified medium are characterized by the fact that log phase continued 100hrs after inoculation and that stationary state phase appeared in general 250hrs after inoculation. Applying the various carbon sources to respiration substrate for yeast cell, the respiration rate of yeast showed the highest value in treatment of maltose and followed in order of raffinose, lactose, glucose, and sucrose. Determined the amount of poly-phosphate and turn over pathway of poly-phosphate according to culture phase of yeast, it is revealed that the yeast synthesized 3 types of poly phosphate (poly-P A,B, and C) and postulated that turn over pathway of poly-phosphate as follows ; Inorganic phosphate is converted into each kind of polyphosphates, and then one part of poly-P-C is converted into poly-P-B, the rest poly-p-C and poly-P-B are converted into poly-P-A. The synthesized poly-phosphate is considered to have a role as energy pool utilizing to synthesis of cellular organic materials. Of the 13 carbon sources used in this experiment, the useful carbon sources for biosynthesis of poly-phosphate and cellular organic materials are confirmed as disaccharide (maltose and sucrose) as well as glucose. Protein synthesis in yeast cell showed the two peaks on 6th and 8th day after inoculation ; nucleic acid on 2nd day (48hrs), carbohydrates on 2nd day (48hrs), and phospholipid on 2nd and 8th day after inoculation, respectively.

  • PDF

The Correction Factor of Sensitivity in Gamma Camera - Based on Whole Body Bone Scan Image - (감마카메라의 Sensitivity 보정 Factor에 관한 연구 - 전신 뼈 영상을 중심으로 -)

  • Jung, Eun-Mi;Jung, Woo-Young;Ryu, Jae-Kwang;Kim, Dong-Seok
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.12 no.3
    • /
    • pp.208-213
    • /
    • 2008
  • Purpose: Generally a whole body bone scan has been known as one of the most frequently executed exams in the nuclear medicine fields. Asan medical center, usually use various gamma camera systems - manufactured by PHILIPS (PRECEDENCE, BRIGHTVIEW), SIEMENS (ECAM, ECAM signature, ECAM plus, SYMBIA T2), GE (INFINIA) - to execute whole body scan. But, as we know, each camera's sensitivity is not same so it is hard to consistent diagnosis of patients. So our purpose is when we execute whole body bone scans, we exclude uncontrollable factors and try to correct controllable factors such as inherent sensitivity of gamma camera. In this study, we're going to measure each gamma camera's sensitivity and study about reasonable correction factors of whole body bone scan to follow up patient's condition using different gamma cameras. Materials and Methods: We used the $^{99m}Tc$ flood phantom, it recommend by IAEA recommendation based on general counts rate of a whole body scan and measured counts rates by the use of various gamma cameras - PRECEDENCE, BRIGHTVIEW, ECAM, ECAM signature, ECAM plus, IFINIA - in Asan medical center nuclear medicine department. For measuring sensitivity, all gamma camera equipped LEHR collimator (Low Energy High Resolution multi parallel Collimator) and the $^{99m}Tc$ gamma spectrum was adjusted around 15% window level, the photo peak was set to 140-kev and acquirded for 60 sec and 120 sec in all gamma cameras. In order to verify whether can apply calculated correction factors to whole body bone scan or not, we actually conducted the whole body bone scan to 27 patients and we compared it analyzed that results. Results: After experimenting using $^{99m}Tc$ flood phantom, sensitivity of ECAM plus was highest and other sensitivity order of all gamma camera is ECAM signature, SYMBIA T2, ECAM, BRIGHTVIEW, IFINIA, PRECEDENCE. And yield sensitivity correction factor show each gamma camera's relative sensitivity ratio by yielded based on ECAM's sensitivity. (ECAM plus 1.07, ECAM signature 1.05, SYMBIA T2 1.03, ECAM 1.00, BRIGHTVIEW 0.90, INFINIA 0.83, PRECEDENCE 0.72) When analyzing the correction factor yielded by $^{99m}Tc$ experiment and another correction factor yielded by whole body bone scan, it shows statistically insignificant value (p<0.05) in whole body bone scan diagnosis. Conclusion: In diagnosing the bone metastasis of patients undergoing cancer, whole body bone scan has been conducted as follow up tests due to its good points (high sensitivity, non invasive, easily conducted). But as a follow up study, it's hard to perform whole body bone scan continuously using same gamma camera. If we use same gamma camera to patients, we have to consider effectiveness of equipment's change by time elapsed. So we expect that applying sensitivity correction factor to patients who tested whole body bone scan regularly will add consistence in diagnosis of patients.

  • PDF

Effects of Moist Extruded Full-fat Soybeans on Gut Morphology and Mucosal Cell Turnover Time of Weanling Pigs

  • Qiao, Shiyan;Li, Defa;Jiang, Jianyang;Zhou, Hongjie;Li, Jingsu;Thacker, P.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.16 no.1
    • /
    • pp.63-69
    • /
    • 2003
  • Ten barrows, weaned at 28 days (7.2$\pm$0.1 kg BW), were used to evaluate the effects of feeding extruded full-fat soybeans on intestinal morphology and mucosal cell turnover time. All pigs were fed corn-based diets with half of the pigs receiving diets supplemented with 15.5% soybean meal and 3% soybean oil and the remaining pigs fed a diet in which the soybean meal and oil were replaced by 18.5% extruded full-fat soybeans. The pigs were individually placed in $80{\times}150cm$ metabolic cages and fed twice daily an amount approximately equal to their ad libitum intake for a period of 14 days. On day 14, pigs were weighed and then injected intraperitoneally with $^3$H]thymidine ($100{\mu}Ci/kg$ of BW, specific activity 20 Ci/mmol) 6 h after the morning meal. A pig from each treatment was killed 1, 4, 8, 16, or 24 h postinjection and intestinal tissues were collected. Daily gains for pigs fed the soybean diet and extruded full-fat soybean diet were 0.24 and 0.31 kg/day (p=0.05) with feed conversions of 1.58 and 1.39 (p=0.05), respectively. In comparison with pigs fed soybean meal, pigs fed moist extruded full-fat soybeans had a decreased crypt depth in their duodenum and cecum (p<0.1), while the villus height in the mid jejunum and ileum and the total height (villus height plus crypt depth) of the ileum and mid jejunum increased (p<0.05). The villus width in the duodenum and mid jejunum decreased (p<0.05). The number of crypt epithelial cells in the upper jejunum increased but decreased in the ileum, colon and cecum (p<0.05). The number of villus epithelial cells in the ileum and the upper and mid jejunum increased (p<0.05). The time for migration of epithelial cells in the crypt-villus column decreased (p<0.05) in all sites except the upper jejunum, ileum and cecum. The mucosal turnover rate for all intestinal sites except the upper jejunum, colon and cecum decreased (p<0.05). From these data, we conclude that inclusion of moist extruded full-fat soybeans in weanling pig diets can improve the intestinal morphology and slow the migration rate and turnover time of epithelial cells of the small intestine, especially in the mid jejunum compared with soybean meal.

A Vector-Controlled PMSM Drive with a Continually On-Line Learning Hybrid Neural-Network Model-Following Speed Controller

  • EI-Sousy Fayez F. M.
    • Journal of Power Electronics
    • /
    • v.5 no.2
    • /
    • pp.129-141
    • /
    • 2005
  • A high-performance robust hybrid speed controller for a permanent-magnet synchronous motor (PMSM) drive with an on-line trained neural-network model-following controller (NNMFC) is proposed. The robust hybrid controller is a two-degrees-of-freedom (2DOF) integral plus proportional & rate feedback (I-PD) with neural-network model-following (NNMF) speed controller (2DOF I-PD NNMFC). The robust controller combines the merits of the 2DOF I-PD controller and the NNMF controller to regulate the speed of a PMSM drive. First, a systematic mathematical procedure is derived to calculate the parameters of the synchronous d-q axes PI current controllers and the 2DOF I-PD speed controller according to the required specifications for the PMSM drive system. Then, the resulting closed loop transfer function of the PMSM drive system including the current control loop is used as the reference model. In addition to the 200F I-PD controller, a neural-network model-following controller whose weights are trained on-line is designed to realize high dynamic performance in disturbance rejection and tracking characteristics. According to the model-following error between the outputs of the reference model and the PMSM drive system, the NNMFC generates an adaptive control signal which is added to the 2DOF I-PD speed controller output to attain robust model-following characteristics under different operating conditions regardless of parameter variations and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed 200F I-PD NNMF controller. The results confirm that the proposed 2DOF I-PO NNMF speed controller produces rapid, robust performance and accurate response to the reference model regardless of load disturbances or PMSM parameter variations.

Growth and Cultural Characteristics of Cordyceps cardinalis Collected from Korea

  • Sung, Gi-Ho;Shrestha, Bhushan;Han, Sang-Kuk;Kim, Soo-Young;Sung, Jae-Mo
    • Mycobiology
    • /
    • v.38 no.4
    • /
    • pp.274-281
    • /
    • 2010
  • Cordyceps cardinalis was reported in Japan and the USA in 2004, and its fruiting bodies have recently been cultured in Korea. Herbarium specimens preserved at the Cordyceps Research Institute, Mushtech, Korea were revised and identified as C. cardinalis, based on morphological characters and conidial structures. Most of the C. cardinalis specimens were collected from Mt. Halla in Jeju-do. The effects of various nutritional sources and environmental conditions such as temperature and pH on mycelial growth of C. cardinalis were studied. Oatmeal agar, Martin's peptone dextrose agar, and Schizophyllum (mushroom) genetics complete medium plus yeast extract resulted in the best mycelial growth. Among carbon sources, cereals, and nitrogen sources, maltose, oatmeal, and peptone resulted in the best mycelial growth respectively. Mineral salts helped to increase growth rate but only resulted in thin mycelial density, similar to water agar. A temperature of $25^{\circ}C$ and a pH of 7 resulted in the highest mycelial growth. Based on these results, a Cordyceps cardinalis composite medium (CCM) was formulated with 1% maltose, 2% oatmeal, 1% peptone, and 2% agar. Use of the CCM resulted in slightly better mycelial growth than that of other commonly used agar media. Only organic nitrogen sources imparted a reddish pigmentation to the agar media, but this character diminished after several subcultures. A 7 day culture duration resulted in the best mycelial growth.

Effects of recycling on the biomechanical characteristics of retrieved orthodontic miniscrews

  • Yun, Soon-Dong;Choi, Sung-Hwan;Cha, Jung-Yul;Yu, Hyung-Seog;Kim, Kwang-Mahn;Kim, Jin;Hwang, Chung-Ju
    • The korean journal of orthodontics
    • /
    • v.47 no.4
    • /
    • pp.238-247
    • /
    • 2017
  • Objective: The aim of this study was to compare recycled and unused orthodontic miniscrews to determine the feasibility of reuse. The comparisons included both miniscrews with machined surfaces (MS), and those with etched surfaces (ES). Methods: Retrieved MS and ES were further divided into three subgroups according to the assigned recycling procedure: group A, air-water spray; group B, mechanical cleaning; and group C, mechanical and chemical cleaning. Unused screws were used as controls. Scanning electron microscopy, energy-dispersive X-ray spectrometry, insertion time and maximum insertion torque measurements in artificial bone, and biological responses in the form of periotest values (PTV), bone-implant contact ratio (BIC), and bone volume ratio (BV) were assessed. Results: Morphological changes after recycling mainly occurred at the screw tip, and the cortical bone penetration success rate of recycled screws was lower than that of unused screws. Retrieved ES needed more thorough cleaning than retrieved MS to produce a surface composition similar to that of unused screws. There were no significant differences in PTV or BIC between recycled and unused screws, while the BV of the former was significantly lower than that of the latter (p < 0.05). Conclusions: These results indicate that reuse of recycled orthodontic miniscrews may not be feasible from the biomechanical aspect.

Validation of Load Calculation Method for Greenhouse Heating Design and Analysis of the Influence of Infiltration Loss and Ground Heat Exchange (온실 난방부하 산정방법의 검증 및 틈새환기와 지중전열의 영향 분석)

  • Shin, Hyun-Ho;Nam, Sang-Woon
    • Horticultural Science & Technology
    • /
    • v.33 no.5
    • /
    • pp.647-657
    • /
    • 2015
  • To investigate a method for calculation of the heating load for environmental designs of horticultural facilities, measurements of total heating load, infiltration rate, and floor heat flux in a large-scale plastic greenhouse were analyzed comparatively with the calculation results. Effects of ground heat exchange and infiltration loss on the greenhouse heating load were examined. The ranges of the indoor and outdoor temperatures were $13.3{\pm}1.2^{\circ}C$ and $-9.4{\sim}+7.2^{\circ}C$ respectively during the experimental period. It was confirmed that the outdoor temperatures were valid in the range of the design temperatures for the greenhouse heating design in Korea. Average infiltration rate of the experimental greenhouse measured by a gas tracer method was $0.245h^{-1}$. Applying a constant ventilation heat transfer coefficient to the covering area of the greenhouse was found to have a methodological problem in the case of various sizes of greenhouses. Thus, it was considered that the method of using the volume and the infiltration rate of greenhouses was reasonable for the infiltration loss. Floor heat flux measured in the center of the greenhouse tended to increase toward negative slightly according to the differences between indoor and outdoor temperature. By contrast, floor heat flux measured at the side of the greenhouse tended to increase greatly into plus according to the temperature differences. Based on the measured results, a new calculation method for ground heat exchange was developed by adopting the concept of heat loss through the perimeter of greenhouses. The developed method coincided closely with the experimental result. Average transmission heat loss was shown to be directly proportional to the differences between indoor and outdoor temperature, but the average overall heat transfer coefficient tended to decrease. Thus, in calculating the transmission heat loss, the overall heat transfer coefficient must be selected based on design conditions. The overall heat transfer coefficient of the experimental greenhouse averaged $2.73W{\cdot}m^{-2}{\cdot}C^{-1}$, which represents a 60% heat savings rate compared with plastic greenhouses with a single covering. The total heating load included, transmission heat loss of 84.7~95.4%, infiltration loss of 4.4~9.5%, and ground heat exchange of -0.2~+6.3%. The transmission heat loss accounted for larger proportions in groups with low differences between indoor and outdoor temperature, whereas infiltration heat loss played the larger role in groups with high temperature differences. Ground heat exchange could either heighten or lessen the heating load, depending on the difference between indoor and outdoor temperature. Therefore, the selection of a reference temperature difference is important. Since infiltration loss takes on greater importance than ground heat exchange, measures for lessening the infiltration loss are required to conserve energy.

Altitude training as a powerful corrective intervention in correctin insulin resistance

  • Chen, Shu-Man;Kuo, Chia-Hua
    • Korean Journal of Exercise Nutrition
    • /
    • v.16 no.2
    • /
    • pp.65-71
    • /
    • 2012
  • Oxygen is the final acceptor of electron transport from fat and carbohydrate oxidation, which is the rate-limiting factor for cellular ATP production. Under altitude hypoxia condition, energy reliance on anaerobic glycolysis increases to compensate for the shortfall caused by reduced fatty acid oxidation [1]. Therefore, training at altitude is expected to strongly influence the human metabolic system, and has the potential to be designed as a non-pharmacological or recreational intervention regimen for correcting diabetes or related metabolic problems. However, most people cannot accommodate high altitude exposure above 4500 M due to acute mountain sickness (AMS) and insulin resistance corresponding to a increased levels of the stress hormones cortisol and catecholamine [2]. Thus, less stringent conditions were evaluated to determine whether glucose tolerance and insulin sensitivity could be improved by moderate altitude exposure (below 4000 M). In 2003, we and another group in Austria reported that short-term moderate altitude exposure plus endurance-related physical activity significantly improves glucose tolerance (not fasting glucose) in humans [3,4], which is associated with the improvement in the whole-body insulin sensitivity [5]. With daily hiking at an altitude of approximately 4000 M, glucose tolerance can still be improved but fasting glucose was slightly elevated. Individuals vary widely in their response to altitude challenge. In particular, the improvement in glucose tolerance and insulin sensitivity by prolonged altitude hiking activity is not apparent in those individuals with low baseline DHEA-S concentration [6]. In addition, hematopoietic adaptation against altitude hypoxia can also be impaired in individuals with low DHEA-S. In short-lived mammals like rodents, the DHEA-S level is barely detectable since their adrenal cortex does not appear to produce this steroid [7]. In this model, exercise training recovery under prolonged hypoxia exposure (14-15% oxygen, 8 h per day for 6 weeks) can still improve insulin sensitivity, secondary to an effective suppression of adiposity [8]. Genetically obese rats exhibit hyperinsulinemia (sign of insulin resistance) with up-regulated baseline levels of AMP-activated protein kinase and AS160 phosphorylation in skeletal muscle compared to lean rats. After prolonged hypoxia training, this abnormality can be reversed concomitant with an approximately 50% increase in GLUT4 protein expression. Additionally, prolonged moderate hypoxia training results in decreased diffusion distance of muscle fiber (reduced cross-sectional area) without affecting muscle weight. In humans, moderate hypoxia increases postprandial blood distribution towards skeletal muscle during a training recovery. This physiological response plays a role in the redistribution of fuel storage among important energy storage sites and may explain its potent effect on changing body composition. Conclusion: Prolonged moderate altitude hypoxia (rangingfrom 1700 to 2400 M), but not acute high attitude hypoxia (above 4000 M), can effectively improve insulin sensitivity and glucose tolerance for humans and antagonizes the obese phenotype in animals with a genetic defect. In humans, the magnitude of the improvementvaries widely and correlates with baseline plasma DHEA-S levels. Compared to training at sea-level, training at altitude effectively decreases fat mass in parallel with increased muscle mass. This change may be associated with increased perfusion of insulin and fuel towards skeletal muscle that favors muscle competing postprandial fuel in circulation against adipose tissues.

Effects of Dietary Starch and Sucrose on Tissue Responsiveness and Sensitivity to Insulin in Goats Fed a High-concentrate Diet

  • Fujita, Tadahisa;Kajita, Masahiro;Sano, Hiroaki
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.3
    • /
    • pp.385-392
    • /
    • 2007
  • A glucose clamp technique was used to compare dietary starch (ST), starch plus sucrose (ST+SU) and sucrose (SU) with regard to the effect on tissue responsiveness and sensitivity to insulin in intact adult male goats. The goats were fed diets containing 1.2 times of ME and CP for maintenance requirements twice daily for 21 d. Of the energy intake, 30% was offered with ST, ST+SU or SU for the respective diets, and 70% as alfalfa hay, ground corn and ground soybean meal at the respective weight ratio of 1, 1, and 0.3 for all diets. Tissue responsiveness and sensitivity to insulin were evaluated using a hyperinsulinemic euglycemic clamp technique with four levels of insulin infusion beyond 13 h after feeding. The concentrations of plasma metabolites and insulin were also determined at 3, 6 and 13 h after feeding to evaluate the effects of different carbohydrates on metabolic states in the body. Plasma glucose concentration was higher (p = 0.01) for SU diet than for ST and ST+SU diets. Increasing SU intake decreased (p<0.01) plasma acetate concentration across the time. At 3 h but not 6 and 13 h after feeding, high lactate (p = 0.01), and non-significant high propionate (p = 0.14) and low urea nitrogen (p = 0.19) concentrations were observed in plasma on SU compared with ST and ST+SU diets. Plasma insulin concentration was not different (p = 0.44) between ST and SU fed animals. In the glucose clamp experiment, considering the effects on the maximal glucose infusion rate (tissue responsiveness to insulin, p = 0.54) and the plasma insulin concentration at half-maximal glucose infusion rate (insulin sensitivity, p = 0.54), SU was not different from ST. It is concluded that SU may not be greatly different from ST with regard to the effect on tissue responsiveness and sensitivity to insulin in adult goats when fed twice daily as part of a high-concentrate diet. The possible greater effects of SU on plasma metabolites concentrations at 3 h than at 6 and 13 h after feeding suggest that a lack of persistency of SU effects during the postfeeding period may be associated with the poor response to SU in insulin action.

Effect of Sodium Hydroxide plus Hydrogen Peroxide Treated Mustard (Brassica campestris) Straw Based Diets on Rumen Degradation Kinetics (In sacco), Fermentation Pattern and Nutrient Utilization in Sheep

  • Mishra, A.S.;Misra, A.K.;Tripathi, M.K.;Santra, A.;Prasad, R.;Jakhmola, R.C.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.3
    • /
    • pp.355-365
    • /
    • 2004
  • Two experiments were conducted to determine the effect of alkaline hydrogen peroxide (AHP) treatment (1% NaOH+1.5% $H_2O_2$; 1 AHPMS, 2% NaOH+1.5% $H_2O_2$; 2AHPMS) on rate and extent of degradation of mustard straw (MS) in sacco in sheep, and its in vivo digestion and ruminal fermentation characteristics when fed to sheep with concentrate (200 g per sheep daily). The treatment of straw with 1 and 2% AHP increased its sodium content by 148 and 296% to that of untreated straw (UMS). There was significant decrease in NDF and hemicellulose contents of AHP treated straw and increase in cellulose and lignin contents. Phenolic acids like ferrulic, $\rho$-coumaric and o-coumaric significantly (p<0.001) reduced by AHP treatment of mustard straw. In first experiment the in sacco degradation of DM, OM and NDF was significantly (p<0.01) greater for 2 AHPMS than for UMS at all incubation periods. The disappearance of nutrient from 1 AHPMS and 2 AHPMS treated straws continue to increase up to 96 h whereas in UMS the peak disappearance was found at 48 h. By using the equation {(y=a+b) ($1-e^{-ct}$)} the degradation rates (c) for DM, OM, and NDF were significantly higher for UMS than AHP treated straws. Level of alkali (1 and 2%) had significant effect on degradation characteristics (a, b, c and $P_{0.05}$) of DM and NDF fraction of MS. However, the effect was not pronounced on OM fraction of MS. In feeding experiment, the intake of nutrients for DM, OM, cell wall constituents and energy was higher on 2 AHPMS, whereas no effect on the digestibility of these nutrients was observed. The apparent nitrogen retention was higher (p<0.05) both in 1 and 2 AHPMS groups. Water intake by animals was significantly increased due to AHP treated mustard straw feeding. Rumen liquor pH was higher in 2 AHPMS fed animals. The $NH_3-N$ of rumen liquor was not affected by feeding of AHP treated MS based diets. Total VFA concentration was significantly (p<0.01) higher in UMS fed group. The fractional out flow rate of DM was higher (p<0.05) in animals fed on 2 AHPMS diets compared to UMS and lAHPMS fed groups. The population of large holotrichs was higher (p<0.05) on AHP treated MS fed diets compared to UMS. The study indicated that treatment of mustard straw with AHP changed its chemical composition towards a better feed. The nutritive value of 2% AHP treated mustard straw was better in terms of dry matter intake and apparent nitrogen retention. The higher in sacco DM, OM and NDF disappearance however, was not confirmed by in vivo data in this study.