• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.139-150
• /
• 1999

The ozone concentrations measured at the National Air Monitoring Stations between 1990 and 1995 were reviewed to detect any anomalies in the measurements. By screening the cases, in which variation of the ozone concentration from the previous measured value is greater than 75ppb, 125 station-days were identified as the test cases for the anomaly test. Historical and parallel consistencies of the measured concentrations were examined by plotting data for each test case. The detected anomalies can be classified into four categories; single outliers, anomalous variations during the startup period, baseline rises, and fluctuations in th diurnal variations. Anomalies were detected in as many as 80 cases among 125 test cases. Because of these anomalies, the number of hours exceeding 100ppb in the areas other than the Greater Seoul Area(GSA) could decrease from 157 to 107. Further studies for developing the methodology for eliminating the abnormal monitoring data are warranted for the data from the National Air Monitoring Stations are official to the both inside and outside of the country.

• 한국동물학회지
• /
• 제34권1호
• /
• pp.81-92
• /
• 1991

Nauplii and cyprid la%ae were cultured in the laboratory at a temperature of 25'c of 33 parts per thousand. La%al development includes the six nauplius and a cyprn'dstages. Morphological characteristics such as antennules, antennae and mandibles as well as the general pattern of the thoracican Cirripedia are described and illustrated. All the nauplius larvae have trilobed labra which are typical in balanoides, with numerous slender hairs. It is possible to compare the setation of larva of Balanus kondakoui with those of B. albicostatus, B. amphitrr'te, 9. trigonus, B. uariegatus, and Chthamafus rhallengerl' by plotting of numerical setation of the antennae against the mandibles.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.167-173
• /
• 2014

A novel multi-oxide layer structure for vertical cavity surface emitting laser (VCSEL) structures is proposed to achieve higher single mode output power. The structure has four oxide layers with different aperture sizes and thicknesses. The oxide layer thicknesses are optimized simultaneously to reach the highest single mode output power. A heuristic method is proposed for plotting the influence of these variable changes on the operation of optical output power. A comprehensive optical-electrical thermal-gain self-consistent VCSEL model is used to simulate the continuous-wave operation of the multi-layer oxide VCSELs. A comparison between optimized VCSELs with different structures is presented. The results show that by using multi-oxide layers with different thicknesses, higher single-mode optical output power could be achieved in comparison with multi-oxide layer structures with the same thicknesses.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.531-536
• /
• 1999

This study was carried out to derive optimal design drought flows by the Weibull-3 and Wakeby distributions for the annual drought flows series at seven watersheds along Han, Nagdong, Geum, Yeongsan and Seomjin river systems. L-coefficient of variation , L-skewness and L-kurtosis were calculated by the L-moment ratio respectivley. Parameters were estimated by the Methods o fL-Moments with continuous duration. Design drought flows obtained by Methods of L-Moments using Weibull plotting positions formula in the Weibull-3 and Wakeby distributions were compared by the Relative Mean Errors(RME), Relative Absolute Errors (RAE) and Root Mean Square Errors(RMSE). It has shown that design drought flows by the Wakeby distribution using method of L-moments are much closer to those of the observed data in comparison with those obtained by the Weibull-3 distribution using method of L-moments.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.373-380
• /
• 1999

This paper summerizes the former 5 papers that studied computer programming for the estimation of the Weibull, Extreme value, Hazard, Normal and Log-normal parameters which have a close relation with the reliability of the various kinds of industrial products. Probability paper is very commonly used in estimating the parameters, however, it is very hard to neglect the errors in plotting the data, and especially in drawing the regression line. The main purpose of this paper is to reduce these errors and to help the engineers to use the parameters in improving the reliability of their prod- ucts. The following parts are included in the computer programming with the em- phases on significant digits and rounding of numerical values : $\bullet$ data input part for various cases $\bullet$ parameter estimation part $\bullet$ printing part for input data $\bullet$ printing part for the results $\bullet$ printing part for the graphic(probability paper). And the running results(monitor displays) of the program for a fictitious example of Weibull distribution is given for the interested ones.

• 전자공학회논문지D
• /
• 제34D권6호
• /
• pp.50-57
• /
• 1997

TiO$_{2}$ tin films have been grown by MOCVD and their cahracteristics of crystallization and microstructures ahve been invetigated. Envelope mehtods are applied to the analysis of the transmission spectra to obtain the optical constants such as refractive indices and extinction coefficients for the TiO$_{2}$ thin films. The envelope methods are proved to be accurate by simulatin gthe transmission spectra. TiO$_{2}$ thin films start to crystallize at 350.deg.C and then crystallize fully into anatase phase at 400.deg.C or higher temperatures. Activation energies are obtained by plotting the deposition rate with varying the substrate temperature. It is 17.8 kcal/mol for the reaction limited regions. The refractive index and the extinction coefficient of the TiO$_{2}$ thin film at .gamma.=632.8 nm increases from 2.19 to 2.32 and decreases from 0.021 to 0.007, respectively, as the substrate temperature increases from 400 to 600.deg. C.

• 대한화학회지
• /
• 제14권1호
• /
• pp.5-12
• /
• 1970

River water and industrial waste water in Seoul were studied by means of chemical oxygen demand(COD) as an indicator for water pollution, from August 1967 to July 1968. Rivers flowing through residential and industrial areas are badly contaminated and COD of water in Han River increases as it progresses to downstream. Seasonal variation of COD showed that higher value of COD was observed in spring and lower in autumn. It is clear that the seasonal variation of COD is influenced by the precipitation. Close relationship was found between COD and population density. The lowest COD curve obtained by plotting COD values against population density and show that the curve slopes upward. The discontinuation of the curve was shown at the population density of 14,000/km$^2$; an increase in COD was acute over the population density of 14,000/km$^2$.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.104-113
• /
• 2011

The paper presents a new method for the analysis of the cavitation behaviour of hydraulic turbomachines. This new method allows determining the coefficient of the cavitation inception and the cavitation sensitivity of the turbomachines. We apply this method to study the cavitation behaviour of a large storage pump. By plotting in semi-logarithmic coordinates the vapour volume versus the cavitation coefficient, we show that all numerical data collapse in an exponential manner. By analysis of the slope of the curve describing the evolution of the vapour volume against the cavitation coefficient we determine the cavitation sensitivity of the pump for each operating point.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.26-31
• /
• 2017

In the present study, 20 kW turbine for OTEC with a ejector and a motive pump is designed and performance prediction is implemented by means of CFD. The meridional analysis for initial geometry and CFD for detail design are used to design the turbine. This turbine has about 90.9% efficiency and 28.47 kW power at 15,000 rpm and pressure ratio of 1.53. Homogeneous mixture model is used because two phase flow can be occurred in the turbine. Performance evaluation is carried out and then results are presented by plotting of power, mass flow rate and efficiency as varying pressure ratio and rotational speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.470-477
• /
• 2000

The states of control loops in existing actual systems are changed according to time varying conditions of controllest process and other system components. Adjusting control parameters properly at site which is performed generally by Ziegler & Nichols mthod is important for safe and efficient operation, but the method may require much time to adjust and not easy to inexperienced engineers. This study is aimed to propose more handy method to adjust control parameters by plotting operating conditions on the space of adjusting parameters. One loop of model control system without perturbation condition has been adopted and its stability limit was plotted on the coordinates of Gain and Integral time which was acquired after analyzing Nyquist diagrams and time domain responses. The result showed that the sets of adjusting parameters according to critical stability and proper stability could be acquired reasonably through both responses and the curves on parameter space revealed available patterns for the purpose of easy maintenance of control characteristics.