• 한국산학기술학회논문지
• /
• 제14권12호
• /
• pp.6047-6052
• /
• 2013

화장품제조업은 동일한 제품을 대량으로 생산하고 소비되는 구조로 금형을 통한 생산은 필연적이다. 화장품을 담는 용기는 소비자의 구매의사에도 영향을 주는 요소이며 완제품가격에서 차지하는 부분이 크기 때문에 경제성, 심미성과 기능성을 충족시키는 금형이 필요하다. 화장품 용기 중에 사각형태의 용기는 미성형 불량이 다른 형태의 제품보다 자주 발생하는 특징을 가진다. 기존에 사각형 형태의 화장품용기 제작공정은 2단 금형에 사이드게이트 구조로 금형을 제작하는데 이는 후가공과 게이트 흔적이 남는 단점이 있다. 본 연구에서 제안한 오버랩게이트는 후가공이 거의 없고 음각으로 게이트가 절단되는 특징이 있으며, 사이드게이트와 비교하여 Moldflow를 이용한 유동시스템을 시뮬레이션 하였다. 오버랩게이트가 유동성, 고화, 밀도, 에어트랩 등에서 유동성 향상과 불량률을 낮출 수 있는 결과를 확인하였으며, 해석결과를 기반으로 금형을 제작을 하고 사출성형 하였다. 본 연구를 통해 미성형 불량을 줄이고 심미성, 기능성 등의 특성을 가지는 화장품용기 제품의 대량생산 가능성을 검증하였다

• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.79-84
• /
• 2006

본 연구는 자연지형에 존재하는 다양한 형태의 크고 작은 거칠기 요소들로 인해 기본 유동장이 변화하는 양상을 밝히기 위한 기초연구로서, 본 제1보와 이어지는 제2보로 나뉘어 소개될 것이다. 실험은 동일한 2차원 사각단면을 갖는 많은 양의 거칠기 요소를 평판위에 규칙적으로 배열한 후 거칠기 주위 유동장을 계측하였다. 회류수조에서 PIV 기법을 사용하여 2종류의 거칠기요소 높이와 3종류의 거칠기 사이 간격을 택하여 총 6경우에 대하여 거칠기 유동의 특성을 비교하였다. 실험결과 거칠기 간격이 거칠기 높이의 7배와 14배인 경우가 3.5배에 비하여 거칠기로 인한 유통장의 교란이 더 활발하고, 그에 따라 유동장에 미치는 영향도 큼을 확인할 수 있었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제9권2호
• /
• pp.85-91
• /
• 2006

본 연구는 자연지형에 존재하는 다양한 형태의 크고 작은 거칠기 요소들로 인하여 기본 유동장이 변화하는 양상을 밝히기 위한 연구로서 회류수조에서 PIV 기법을 사용하여 수행되었다. 먼저 제1보에서는 동일한 2차원 사각단면을 가지는 많은 양의 거칠기 요소를 평판위에 규칙적으로 배열한 후 거칠기요소의 높이와 거칠기 사이의 간격이 다른 세 경우에 대하여 유속, 유선 및 와도분포를 계측하여 거칠기 유동의 특성을 살펴보았다. 본 2보에서는 난류유동특 성을 비롯하여 벽법칙을 이용한 해석과 경계층 적분변수 도출을 통하여 거칠기 간격이 유동장 변화에 미치는 영향을 정량적으로 비교하고자 하였다. 실험결과 거칠기 간격이 거칠기 높이의 7배와 14배인 경우 3.5배에 비하여 거칠기로 인한 유동장의 변화가 큼을 재차 확인할 수 있었다.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.87-91
• /
• 2009

Fluorine-doped $SmFeAsO_{1-x}F_x$ single crystals with the nominal value of x=0.2 were grown at $1350-1450^{\circ}C$ under the pressure of 3.3 GPa by using the self-flux method. Plate-shaped single crystals in the range of a few-150 ${\mu}m$ in their lateral size were obtained. The detailed crystal structure was analyzed by using the x-ray diffractometry. Superconducting transition temperature, determined by the resistive transition, of a single crystal was about 49 K with a narrow resistive transition width of ${\sim}1$ K. A relatively sharp transition, a low residual resistivity, and a large residual resistivity ratio compared with those reported for $REFeAsO_{1-x}F_x$(RE=Sm, Nd) single crystals indicate the high quality of our single crystals.

• 한국태양에너지학회 논문집
• /
• 제32권5호
• /
• pp.41-51
• /
• 2012

Heliostat field is the most important subsystem in the tower type solar thermal power plant since its optical performance affects the total system efficiency most significantly while the construction cost of it is the major part of total construction cost in such a power plant. Thus a well designed heliostat field to maximize the optical efficiency as well as to minimize the land usage is very important. This work presents methodology, procedures and result of heliostat filed design for 200kW solar thermal power plant built recently in Daegu, Korea. A $2{\times}2(m)$ rectangular shaped receiver located at 43(m) high and tilted $28^{\circ}$ toward heliostat field, 450 of heliostats of which the reflective surface is formed by 4 of $1{\times}1(m)$ flat plate mirror facet, and the land area having about $140{\times}120(m)$ size are used to form the heliostat field. A procedure to deploy 450 heliostats in radial staggered nonblocking formation is developed. Also the procedures to compute the cosine effect, intercept ratio, blocking and shading ratio in the field are developed. Finally the heliostat filed is designed by finding the optimal radial distance and azimuthal spacing in radial staggered nonblocking formation such that the designed heliostat field optical efficiency could be maximized. The designed heliostat field has 77% of annual average optical efficiency, which is obtained by annually averaging the optical efficiencies computed between the time of where sun elevation angle becomes $10^{\circ}$ after sunrise and the time of where sun elevation angle becomes $10^{\circ}$ before sunset in each day.

• Imaging Science in Dentistry
• /
• 제46권3호
• /
• pp.179-184
• /
• 2016

Purpose: In the present study, we coined the term 'alveolar dome' and aimed to demonstrate the prevalence of alveolar domes through digital periapical radiographs. Materials and Methods: This study examined 800 digital periapical radiographs in regard to the presence of alveolar domes. The periapical radiographs were acquired by a digital system using a photostimulable phosphor (PSP) plate. The ${\chi}^2$ test, with a significance level of 5%, was used to compare the prevalence of alveolar domes in the maxillary posterior teeth and, considering the same teeth, to verify the difference in the prevalence of dome-shaped phenomena between the roots. Results: The prevalence of alveolar domes present in the first pre-molars was statistically lower as compared to the other maxillary posterior teeth (p<0.05). No statistically significant difference was observed in the prevalence of alveolar domes between the maxillary first and second molars. Considering the maxillary first and second molars, it was observed that the palatal root presented a lower prevalence of alveolar domes when compared to the distobuccal and mesiobuccal roots (p<0.05). Conclusion: The present study coined the term 'alveolar dome', referring to the anatomical projection of the root into the floor of the maxillary sinus. The maxillary first and second molars presented a greater prevalence of alveolar domes, especially in the buccal roots, followed by the third molars and second pre-molars. Although the periapical radiograph is a two-dimensional method, it can provide dentists with the auxiliary information necessary to identify alveolar domes, thus improving diagnosis, planning, and treatment.

• Journal of Magnetics
• /
• 제3권2호
• /
• pp.55-63
• /
• 1998

Magnetic and magnetostrictive properties of amorphous Sm-Fe and Sm-Fe-B thin films are systematically investigated over a wide composition range from 14.1 to 71.7 at.% Sm. The films were fabricated by rf magnetron sputtering using a composite target composed of an Fe (or Fe-B) plate and Sm chips. The amount of B added ranges from 0.3 to 0.8 at. %. The microstructure, examined by X-ray diffraction, mainly consists of an amorphous phase in the intermediate Sm content range from 20 to 45 at.%. Together with an amorphous phase, crystalline phases of Fe and Sm also exist at low and high ends of the Sm content, respectively. Well-developed in-plane anisotropy is formed over the whole compositionrange, except for the low Sm content below 15 at.% and the high Sm content above 55 at %. As the Sm content increases, the saturation magnetization decreases linearly and the coercive force tends to increase, with the exception of the low Sm content where very large magnitudes of the saturation magnetization and the coercive force are observed due to the existence of the crystalline $\alpha$-Fe phase. The coercive force is affected rather substantially by the B addition, resulting in lower values of the coercive force in the practically important Sm content range of 30 to 40 at.%. Good magnetic softness indicated by well-developed in-plane anisotropy, a square-shaped hysteresis loop and a low magnitude of the coercive force results in good magnetostrictive characteristics in both Sm-Fe-B thin films. The magnetostrictive characteristics, particularly at low magnetic fields, are further improved by the addition of B; for example, at a magnetic field of 100 Oe, the magnitude of magnetostriction is -350 ppm in a Sm-Fe thin film and it is -470 ppm in a B containing Sm-Fe thin film.

• Journal of Korean Biological Nursing Science
• /
• 제5권2호
• /
• pp.21-30
• /
• 2003

The effect of hand hygiene was measured by hand culture before and after hand hygiene for 86 nurses, doctors, and nurses aide/housekeepers in Surgical Intensive Care Unit. The subjects were asked to press their dominant hand in hand-shaped Mannitol salt agar immediately after patient contact and then washed their hand by preferred hand hygiene agents [soap and water, waterless alcohol gel, or 4% chlorhexidine gluconate detergent (CHG)], and cultured one hand again Amount of isolated microorganism was calculated by counting the number of divided areas ($1{\times}1cm$) which is culture positive in hand culture plate. The amount of microorganisms were significantly reduced from 58.1(${\pm}38.59$) to 27.4(${\pm}30.4$) cells after hand hygiene. The staff nurse's hand hygiene was more effective compared to medical doctors and nurses aide/housekeepers. Methicillin-resistant Staphylococcus aureus(MRSA) was isolated in 41(47.1%) subjects ; but only removed 100% in 28(32.2%) subjects. When the amount of hand microorganisms was compared by subject's preferred hand hygiene agents, it was decreased in order of 4% CHG, waterless alcohol solution, soap and water, and water. The hand hygiene practice was inadequate to reduce hand microorganisms and significantly different by occupations. Further research and development of hand hygiene improvement program which emphasize the quality of hand hygiene is recommended.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.574-583
• /
• 2006

Statement of problem : The use of permanent magnetics is increasing in implant dentistry. Purpose : This study is to know the effect of permanent magnetics on bone matrix formation of osteoblasts. Materials and methods : The konus abutment-shaped permanent magnetics were connected to the implant fixture, and placed on the culture plate. The osteoblast-like cell Mc3T3E1 were used for cell culture. As the control group, the implants were connected to titanium healing caps, and cultured in the same conditions of experimental group. After 3. 7, 14 days, cells were cultured, and we measured and compared the amount of collagen type I, osteocalcin, which is bone matrix protein by Western immunoblotting analysis. Results: As a result of Western immunoblotting analysis for estimating the amount of bone extracellular matrix, there was no difference between osteoblast of the experimental group and the control group during 3 and 7day-osteoblast culturing. However when cells were cultured for 14days, the amount of bone extracellular matrix was increased, on the experimental group. Conclusion: From these results, magnetic field of permanent magnetics might have effect on bone formation of osteoblast, especially at initial stage of implant placement. Therefore, their clinical application for implant or bone graft could be possible.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.530-533
• /
• 2010

This paper presents numerical analysis and design optimization of various turbine blade cooling techniques with three-dimensional Reynolds-averaged Navier-Stokes(RANS) analysis. The fluid flow and heat transfer have been performed using ANSYS-CFX 11.0. A fan-shaped hole for film-cooling has been carried out to improve film-cooling effectiveness with the radial basis neural network method. The injection angle of hole, lateral expansion angle of hole and ratio of length-to-diameter of the hole are chosen as design variables and spatially averaged film-cooling effectiveness is considered as an objective function which is to be maximized. The impingement jet cooling has been performed to investigate heat transfer characteristic with geometry variables. Distance between jet nozzle exit and impingement plate, inclination of nozzle and aspect ratio of nozzle hole are considered as geometry variables. The area averaged Nusselt number is evaluated each geometry variables. A rotating rectangular channel with staggered array pin-fins has been investigated to increase heat transfer performance ad to decrease friction loss using KRG modeling. Two non-dimensional variables, the ratio of the eight diameter of the pin-fins and ratio of the spacing between the pin-fins to diameter of the pin-fins selected as design variables. A rotating rectangular channel with staggered dimples on opposite walls are formulated numerically to enhance heat transfer performance. The ratio of the dimple depth and dimple diameter are selected as geometry variables.