Food adulteration is a serious consumer fraud and a potentially dangerous practice. Regulatory authorities and food processors require a rapid, non-destructive test to accurately confirm authenticity in a range of food products and raw materials. Olive oil is prime target for adulteration either on the basis of the processing treatments used for its extraction (extra virgin vs virgin vs ordinary oil) or its geographical origin (e.g. Greek vs Italian vs Spanish). As part of an investigation into this problem, some preliminary work focused on the ability of near infrared spectroscopy to discriminate between virgin olive oils from separate regions of the Mediterranean i. e. Crete and the Peloponese. A total of 46 oils were collected: 18 originated in Crete and 28 in the Peloponese. Oils were stored in a temperature-controlled room at 2$0^{\circ}C$ prior to spectral collection at room temperature (15-18$^{\circ}C$). Samples (approximately 0.5$m\ell$) were placed in the centre of the quartz window in a camlock reflectance cell; the gold-plated baking plate was then gently placed into the cell against the glass so as to minimize the formation of air bubbles. The rear of the camlock cell was then screwed into place producing a sample thickness of 0.5mm. Spectra were recorded between 400 and 2498nm at 2nm intervals on a NIR Systems 6500 scanning monochromator. Spectral collection took place over 2-3 days. Data were analysed using both WINISI and The Unscrambler software to investigate the possibility of discriminating between the oils from Crete and the Peloponese. A number of data pre-treatments were used and discriminant models were developed using discriminant PLS (WINISI & Unscrambler) and SIMCA (Unscrambler). Despite the small number of samples involved, a satisfactory discrimination between these two oil types was achieved. Graphical examination of principal component scores for each oil type also holds out the possibility of separating oils from either Crete and the Peloponese on the basis of districts within each region. These preliminary data suggest the potential of near infrared spectroscopy to act as a screening technique for the confirmation of geographic origin of extra virgin olive oils. The sample presentation strategy adopted uses only small volumes of material and produces high quality spectra.
본 연구에서는 볼트조립 앵글을 적용한 선조립 합성기둥(이하 PSRC 합성기둥)의 압축성능을 연구하였다. 2/3 축소비율의 PSRC 기둥실험체 4개와 기존 SRC 기둥실험체 2개에 대하여 중심축 압축실험을 수행하였다. 횡보강재의 수직간격 및 단면형상과 앵글의 단면형상을 실험변수로 고려하였다. 실험결과, PSRC 기둥실험체는 기존 SRC 기둥실험체와 비교하여 비슷한 압축하중 재하능력 및 변형능력을 발휘하였다. PSRC 합성기둥의 경우, 횡방향 강판의 좁은 횡보강 간격과 Z형 단면의 강판이 압축강도 및 변형능력 향상에 효과적인 것으로 나타났다. 또한 PSRC 합성기둥은 현행설계기준에 의한 공칭 압축강도보다 큰 압축하중 재하능력을 나타내었다. 실험체들에 대한 수치해석결과는 피복 콘크리트 탈락으로 인한 하중감소를 제외하고 초기강성 및 하중재하능력을 비교적 잘 예측하였다.
미트패티 제품에 열풍건조 단감분말(HP)과 동결건조 단감분말(FP)을 각각 3%(HP-3%, FP- 3%)와 6%(HP-6%, FP-6%)를 첨가하여 제조한 후 폴리비닐랩으로 포장한 후 4℃에 저장하였다. 수분함량은 대조구와 HP-3%가 다른 처리구에 비하여 유의적으로 높았으며(p<0.05), 조단백질 함량은 FP-6%, 조지방 함량은 FP-3% 처리구가 다른 처리구에 비하여 높았으며, 조회분 함량은 유의적인 차이가 없었다(p>0.05). 저장기간이 경과함에 따라 pH, L* 및 a*값은 모든 처리구에서, 보수력은 CTL와 HP-6%, 가열감량은 HP-3%에서 유의적으로 감소하였다(p< 0.05). 미트패티의 직경과 두께는 저장기간이 경과함에 따라 감소하였다. VBN은 저장기간이 경과함에 따라 모든 제품에서 증가하였다(p<0.05). 처리구들의 TBARS는 저장 전 기간 동안 CTL보다 유의적으로 높았다(p<0.05). 저장 8일까지 총균수는 4.61 log10 CFU/g 수준을 유지하였다. 관능검사결과, 향과 풍미, 육색 및 전체적인 기호도는 처리구가 더 좋은 점수를 얻었다(p<0.05).
현재 우리나라의 다짐관리와 평가에는 주로 평판재하시험, 현장에서 모래치환법에 의한 흙의 밀도 시험방법 등이 이용되고 있지만 이러한 방법들은 여러 문제점을 갖고 있다. 지난 30년 동안 문제점을 보완하기 위해 유럽, 미국 등을 중심으로 연속다짐관리에 대한 연구가 활발히 진행되고 있으며, 이 외에도 새로운 다짐평가장비인 지오게이지, 동평판재하시험기, 동적콘관입시험기 등을 개발하여 사용하고 있다. 이 연구에서는 이러한 새로운 다짐평가장비들을 기존 다짐평가방법을 보완, 대체할 수 있는 시험방법으로 활용하고자 시험성토를 통하여 현장시험을 실시하였다. 그 결과 연속다짐평가 장비인 컴팩토미터와 동평판재하시험기의 경우 기존 다짐도 평가 방법인 평판재하시험, 현장들밀도시험결과와 경향이 비교적 잘 일치하는 것으로 나타났다.
에틸렌디아민테트라아세트산, 구연산 및 $NH_4Cl$ 융제가 첨가된 분무용액으로부터 분무열분해법에 의해 얇은 막 구조의 전구체 분말들을 합성하였다. $1,200^{\circ}C$에서 소성 과정을 거친 유기 첨가제와 융제를 사용하지 않은 $BaMgAl_{10}O_{17}:Eu$ 형광체는 $1{\sim}5{\mu}m$ 크기의 구형이며, 두꺼운 막 형태의 속이 빈 구조를 가졌다. 반면에 에틸렌디아민아세트산과 구연산을 첨가하여 합성된 BAM:Eu 형광체는 판상 구조의 미세한 크기를 가졌다.$NH_4Cl$ 융제의 첨가량이 0, 6, 35 wt%일때 합성된 미세 형광체들의 결정자 크기는 각각 23, 35, 33 nm였다. 최대의 발광 세기를 나타내는 최적의 융제 첨가량은 형광체의 35 wt%였으며, 융제를 첨가하지 않은 분무용액으로부터 합성된 형광체의 발광 세기의 215%였다.
오버레이 용접은 희석율에 의해 적층 두께에 따라 화학성분 함량과 용접부의 경도에 영향을 미치며 이는 파이프 제품의 표면성질을 결정한다. 이로 인해 오버레이 용접은 적층의 수를 고려하여야 한다. 본 연구에서는 탄소강 모재에 내부식성 소재인 모넬 소재를 오버레이 용접하여 적층수에 따른 Fe함량, 모재와 모넬 소재와의 용접성, 부위별 경도와 표면 평탄도를 실험적으로 연구하였다. 각각의 평가는 평판의 모재와 파이프 모재에 3개의 층으로 오버레이 용접 후 실시하였다. Fe함량은 각 층별 시료를 채취하여 성분 분석을 통해 평가하였으며, 3Layer에서 만족하는 함량을 나타내었다. 또한 적층별 시편을 밴딩 시험하여 용접성을 평가하였다. 적층별 경도와 비드 평탄도는 Micro Vickers와 3차원 측정을 통해 평가하였다. 경도는 1Layer에서 발생하는 HAZ부에 의해 가장 높은 경도 값을 보였으며, 적층이 증가할수록 경도가 감소하였다. 비드 평탄도의 경우 적층수 증가에 따라 편차가 급격한 차이가 발생하였으며, 이는 경도와 함께 사용 목적의 측면에서 주의 깊게 고려해야 한다. 이러한 실험적 결과는 목적에 따른 용접 파이프 적층수의 결정 방법을 나타내었다.
본 연구에서는 지오게이지, 동평판재하시험기 그리고 간이지지력시험기 등과 같은 지반강성도를 평가할 수 있는 시험장치와 현장 다짐도 측정에 가장 많이 사용되는 평판재하시험을 다짐횟수, 함수비 그리고 다짐층 두께 등을 변화해 가면서 현장시험을 수행한 결과, 다음과 같은 잠정 결론을 내릴 수 있었다. 1) 지오게이지와 동평판재하시험기 그리고 간이지지력 시험기에서 측정된 결과는 모두 다짐도 증가에 따른 지반 강성 증가 현상을 잘 반영하는 것으로 나타났다. 2) 함수비에 따른 지반강성 증감 현상은 지오게이지와 간이지지력시험 결과에서만 일부 뚜렷하게 나타났으며, 동평판재하시험이나 기준 시험인 평판재하시험은 함수비 증감에 따라 지반강성 증감 현상이 뚜렷하게 나타나지 않았다. 3) 다짐충 두께 변화에 따른 지반강성도 평가시험 결과 본 시험에서 수행한 지오게이지, 동평판재하시험, 간이지지력 시험은 물론 기준시험인 평판재하시험의 경우에도 일정한 경향이 뚜렷하게 나타나지 않아 이에 대한 추가적인 연구가 필요할 것으로 판단된다. 본 연구에서는 간편하고 신속한 시험이 가능한 다양한 지반강성평가 시험장치를 이용해 현장에서 다양한 조건의 지반에 대해 다짐도 평가 시험을 수행한 결과, 함수비 및 다짐두께가 일정한 경우 다짐횟수 증가에 따라 모든 시험 결과가 지반강성도가 증가하는 것으로 나타났다. 따라서, 추후 다양한 지반조건에 대해 다양한 시험을 수행하여 다짐도 및 지반강성도의 연관성에 대한 자료가 축적된다면, 본 시험에서 수행한 시험방법으로도 현장 다짐도 측정이 가능할 것으로 판단된다.
Lee Joung-Min;Kim Yung-Soo;Kim Chang-Whe;Jang Kyung-Soo;Lim Young-Jun
대한치과보철학회지
/
제42권3호
/
pp.307-326
/
2004
Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).
본 논문에서는 차세대 무선통신 중계기 및 기지국용 50W급 Doherty 전력증폭기를 설계 및 제작하였다. Doherty 전력증폭기의 보조증폭기를 구현하기 위하여 Gate 바이어스 조절회로를 사용하였다. Gate 바이어스 조절회로는 보조증폭기를 구현할 수 있으나 Doherty 전력증폭기의 출력특성을 개선하기에는 제한된 특성을 가졌다. 이를 해결하고자 Drain 바이어스 조절회로를 첨가였다. 그리고 Doherty 전력증폭기의 효율을 개선하고자 일반적인 2-way 구조가 아닌 3-way 구조를 적용하여 3-way GDCD(Gate and Drain Control Doherty) 전력증폭기를 구현하였다. 비유전율(${\varepsilon}r$) 4.6, 유전체 높이(H) 30 Mill, 동판두께(T) 2.68 Mill(2 oz)인 FR4 유전체를 사용하여 마이크로스트립 선로와 칩 캐패시터로 정합회로를 구성하였다. 실험결과 3GPP 동작 주파수 대역인 2.11GHz ~ 2.17GHz에서 이득이 57.03 dB이고, PEP 출력이 50.30 dBm, W-CDMA 평균전력 47.01 dBm, 5MHz offset 주파수대역에서 -40.45 dBc의 ACLR로써 증폭기의 사양을 만족하였다. 특히 3-way GDCD 전력증폭기인 일반전력증폭기에 비해 동일 ACLR에 대하여 우수한 효율 개선성능을 보였다.
본 논문에서는 두께와 재료의 구성이 변하는 복잡한 형상의 복합재 샌드위치 구조의 파손 거동을 연구하였다. 구조물은 두께가 일정한 알루미늄 하니콤 코어 샌드위치 판넬이, 두께가 줄어드는 폼코어 샌드위치 천이부를 거쳐, 최종적으로는 면재와 면재가 만나 단순 적층판을 이루면서 다른 구조물에 체결되는 형상을 갖는다. 하중은 인장 및 압축하중의 형태로 가해지며 각 3개씩 총 6개 시편에 대한 시험을 수행하였다. 시험 결과 압축시험의 경우 재료불연속선을 따른 면재의 파손에 취약하며, 재료불연속선을 따른 파손을 피할 수 있는 경우 알루미늄 코어와 카본 면재의 디본딩에 의한 파손이 나타남을 알 수 있었다. 파손하중은 디본딩에 의한 파손까지 견디는 경우가 약 16% 높게 나타났다. 인장시험의 경우 파손모드는, 곡률부를 갖는 복합재 구조물에서 가장 취약한 부분인, 플랜지와 웹이 만나는 곡률부의 층간분리 파손이 주를 이루었다. 파손하중은 압축하중이 인장하중에 비하여 약7배 가량 높은 것으로 나타났다. 따라서 본 구조물은 주로 압축하중을 견디기 위한 목적의 구조물에 적용하여야 할 것으로 보인다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.