• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.528-534
• /
• 2020

판형 열교환기의 초기 개발 및 사용은 19세기 후반 유제품 내 존재하던 각종 바이러스의 살균에 대한 엄격한 법규 대응을 위해 시작되었고, 1920년대가 되어서야 본격적으로 상업화되었다. 이후 판형 열교환기의 기본 컨셉은 지금까지도 거의 변화가 없었지만, 고온, 고압 그리고 대용량 열교환에 적용되기 위해 설계 및 제작 방법들이 혁신적으로 발전하여 지금에 이르게 되었다. 현재의 형태와 같은 쉐브론 타입 주름 전열판의 개발은 1970년대 후반 오일 쇼크 이후 에너지 합리화 및 에너지 효율 향상을 위한 요구들이 강하게 제기되면서 시작되어 지금에 이르고 있다. 판형 열교환기의 개발 트렌드는 전열 효율이 좋으면서 압력강하가 낮고 또한 유체 분배가 잘되는 대형 전열판의 개발과 일치한다. 본 논문에서는 전열판 개발방향을 제시하고자 동일 골깊이와 주름피치를 가진 소형 전열판과 대형 전열판의 열성능을 각 채널(H, M, L type)별로 실험적으로 비교, 분석하였다. 실험결과, 대류열전달계수의 경우, 소형 전열판이 대형 전열판에 비해 H type의 경우 평균 16.5%, M type의 경우 25%, 그리고 L type의 경우 약 40% 정도 더 높았다. 압력강하의 경우는 소형 전열판이 H type의 경우 평균 19%, M type의 경우 46%, 그리고 L type의 경우 약 61% 정도 더 높은 것을 알 수 있었다. 이는 여러 예상되는 요인들 중 두 전열판의 유체분배부 차이에 의한 것으로 판단되었다.

• 설비공학논문집
• /
• 제19권5호
• /
• pp.418-425
• /
• 2007

The power consumption and heat generation in a chip increase as the components are miniaturized and the computing speed becomes faster. Therefore, suitable heat dissipation has become one of the primary limiting factors to ensure the guaranteed performance and reliable operation of the electronic devices. A pin-fin array which may be considered as a porous medium could be used as an alterative cooling system of the electronic equipment. The aim of the present study is to investigate the forced-convective heat transfer characteristics of pin-fin heat exchangers. Convective heat transfer through the pin~fin array is analyzed experimentally based on porous medium approach. The influence of the structure of the pin-fin array including the pin-fin spacing, the pin diameter and plate length on heat transfer characteristic is investigated and compared with the Previous analytical results and existing correlation equations. Nowadays, electronic and mechanical devices become smaller and smaller. In this sense, the main purpose of this study is to decide the optimum pin-fin arrangement to get similar heat transfer performance when the length of the existing cooling system is reduced as a half.

• 설비공학논문집
• /
• 제8권1호
• /
• pp.120-139
• /
• 1996

Experiment was performed to study the heat transfer characteristics in 27 kinds of 15 : 1 scale models of multi-louverred fin heat exchangers with a wide range of variables(R $e_{Lp}$ =100~1, 800, $L_p$/F$p$=0.3~0.9, $\theta$=20$^{\circ}$~40$^{\circ}$). Thermofoil heaters were used to heat the louver fins and the local average Nusselt number for each louver in the louver array was obtained at constant wall temperature conditions. Correlations are developed to predict the heat transfer characteristics and drag coefficients. Generally, the heat transfer characteristics in the multi-louvered fins is shown to be similar to those of the laminar heat transfer on a flat plate. As the Reynolds number, the louver pitch to fin pitch ratio$L_p$/F$p$and the louver angle($\theta$) increase respectively, the average Nusselt number increases, but the variation of average Nusselt number as a function of the louver angle is smaller than that as a function of the louver pitch to fin pitch ratio. In case of$L_p$/F$p$ <0.5, the average Nusselt number of the 3rd louver is especially lower than the others, it is expected that it is due to the flow structure such as a recirculation flow and a flow separation.

• 설비공학논문집
• /
• 제22권4호
• /
• pp.248-257
• /
• 2010

An exhausted heat recovery system for a small gas engine cogeneration plant was investigated. The system was designed and built in a 300 kW class cogeneration demonstrative system. The basic performance was tested depending on load variation, and installed to a field site as a bottoming heat and power supply system. The exhaust gas heat exchangers (EGHXs) in shell-and-tube type and shell-and-plate type were tested. The entire efficiency of the cogeneration system was estimated between 85 to 90% under the 100% load condition, of which trend appears higher in summer due to the less thermal loss than in winter. Power generation efficiency and thermal efficiency was measured in a range of 31~33% and 54~57%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.704-709
• /
• 2014

판형열교환기는 해양온도차와 해수냉난방 시스템과 같은 해양플랜트 및 화학공업의 분야에 사용되어 왔다. 본 연구의 목적은 판형열교환기의 채널 간격과 같은 설계 변수를 결정하기 위해서 판형열교환기 내 열전달과 압력강하 특성을 분석하는 것이다. 본 논문에서는 판형열교환기의 채널 간격 변화에 따른 열전달 성능을 수치적으로 연구하였다. 수치적 분석 결과로부터 해수 유량 변화와 함께 j factor는 선형적으로 감소하였다. 판형열교환기 채널 간격 변화에 따라 유량이 증가할수록 j factor는 선형적으로 감소하였다. 그리고 유량의 증가와 함께 f factor는 선형적으로 감소하였다. 물측과 해수측의 열전달 특성과 압력강하 특성을 각각 더하여 비교한 결과, 열전달 성능은 2.4-2.4 mm가 가장 우수하므로, area goodness factor가 가장 우수함을 알 수 있었다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.28-32
• /
• 2016

In the previous study, it is proved by numerical simulation that the baffle shaped as the porous plate installed in the inlet chambers improves the redistribution of the flow injecting to the tube bundles. In the present study, numerical simulation has been performed to investigate the effects of the flow distributors on the thermal characteristics of the shell and tube heat exchangers. The flow fields have been analysed by the three-dimensional Navier-Stokes solvers including the thermal conditions on the shell sides. The numerical results showed that the presence of the baffles improves the redistribution of the heat transfer to the tube bundles though the overall performance drop slightly on the present flow conditions.

• 수산해양기술연구
• /
• 제51권4호
• /
• pp.576-582
• /
• 2015

The efficiencies of thermal power system using fossil fuel depend on heat exchangers which extract energy from the exhaust gas before it is expelled to the atmosphere. To increase heat transfer efficiency it is very important to maintain the surface of heat exchanger as clean condition. The accepted skill of cleaning of fouled surface of heat exchanger is soot blowing. A high pressure jet of air is forced through the flat surface of plate to remove the deposit of fouling. There is, however, little knowledge of the fundamental principles of how the jet behave on the surface and how the jet actually removes the deposit. Therefore, the study focuses on the measuring of cleaning area and cleaning dwell time after accumulating the simulated deposit on the flat surface. The deposit test rig was built for the study and simulated deposit material is used after measuring the physical property of the each material by shearing stress test. Much data was obtained for the analysis by the parameters change such as the different jet speed, different inner pressure and variable distance of the jet from the test rig surface. The experimental data was compared with the theoretical equation and most of the data matches well except some extreme cases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.730-735
• /
• 2004

This paper describes an improving cooling system in the composite plant. In order to save the energy, a plate-and-frame heat exchanger has been used to replace the traditional worm cooler. The composite plant in Thailand was studied as an illustrative case study. The experimental results demonstrating the saving in energy costs and some economic benefits of the proposed technique are obtained.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1942-1949
• /
• 2006

Typically, condensate forms as droplets on the fin surfaces and may bridge the space between the fin surfaces. This is due to the dry characteristics inherent to the fin surface. The droplets increase the air-side pressure drop. In the case of high air velocities, these droplets may be blown off the fins and entrained in the air stream. To minimize the formation of condensate droplet, the wet ability of the fins must be improved. The carry-over velocity is affected by fin surface characteristics. To avoid carry-over in the air conditioner having the highest air velocity of 1.5 m/sec, the dynamic contact angle (DCA) should be at least lowly under $60^{\circ}$.

• 설비공학논문집
• /
• 제26권8호
• /
• pp.381-387
• /
• 2014

The off-set strip fins (OSF) have been widely used to construct plate-fin heat exchangers. Conventional OSF is constructed in successive rows of fins. New OSF structure is suggested to have a gap between adjacent rows of fins. The gap is intended to reduce fouling by allowing small objects to flow through fins. The objective of this work is to investigate the performance of off-set strip fins with gap between successive rows. Results showed that the performance of OSF with gap can't be predicted by previous correlation.