• Korean Journal of Community Nutrition
• /
• v.12 no.5
• /
• pp.617-629
• /
• 2007

To ensure the microbiological safety of food items prepared after cooking process, this study was aimed to identify the hazards related with cooked foods donated to foodbanks through quantitative microbial analysis. Five foodbanks located in Incheon and Gyeonggi area among government-dominant foodbanks were surveyed from February to June, 2007. Manager, recipient, donator, type and quantity of donated foot and facility and equipment were examined for the general characteristics of foodbank. The time and temperature of food md environment were measured at steps from after-production to before-distribution, and the microbial analysis was performed mainly with indicator organism and major pathogens. The amount of cooked foods donated to each foodbank was about 20 to 30 servings and consisted of 80% of total donated foods. Only three foodbanks had separate offices for foodbank operation and four institutions had at least one temperature-controlled vehicle. The flow of donated foods was gone through the steps; production, meal service and holding at donator, collection by foodbank, transport (or holding after transport) and distribution to recipients. It took about 3.8 to 6.5 hours at room temperature from after-production to before-distribution. Only aerobic plate counts (APC) and coliforms were found in microbial analysis. The APC after production were relatively high in $8.2{\times}10^5,\;7.4{\times}10^5,\;6.9{\times}10^5$ and $4.2{\times}10^5 CFU/g$ while $2.8{\times}10^6, \;9.4{\times}10^5,\;1.0{\times}10^6$ and $5.4{\times}10^5CFU/g$ before distribution in mixed Pimpinella brachycarpa, mixed chard mixed amaranth and mixed spinach, respectively. The levels of coliforms in mixed chard and mixed spinach were complied with the standards of the Ministry of Education and Human Resources Management The level of APC in boiled pork was increased from $< 1.0{\times}10 CFU/g$ to $4.0{\times}10^2 CFU/g$. One of delivery vessels was shown $6.2{\times}10^3 CFU/100 cm^2$ in APC, which was over the standards for environment. One of serving tables also showed the high level of $1.2{\times}10^3 CFU/100 cm^2$ in APC and $6.6{\times}10^2 CFU/100 cm^2$ in coliforms. These results suggest the sanitary management of holding at donator and the time-temperature control are key factors to ensure the safety of cooked foods donated to foodbank.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.40-45
• /
• 2015

Electrode systems: a protrusion on conductor (POC), a protrusion on enclosure (POE), a crack in epoxy plate and a free particle (FP) were fabricated to simulate insulation defects in a gas insulated switchgear (GIS). $SF_6$ gas was filled in the electrode systems by 3 bar and/or 5 bar, respectively. Partial discharge (PD) pulses were detected through a $50{\Omega}$ non-inductive resistor. A calibration test was carried out according to IEC 60270, and the sensitivity was 0.25 pC/mV. PD pulses were distributed in the phase of $50^{\circ}{\sim}135^{\circ}$ and over 95% of them existed in the phase of $55^{\circ}{\sim}120^{\circ}$ for the POC. PD pulses were distributed in the phase of $230^{\circ}{\sim}310^{\circ}$ and over 90% of them existed in phase of $220^{\circ}{\sim}300^{\circ}$ for the POE. PD pulses occurred in the phase of $40^{\circ}{\sim}60^{\circ}$ and $220^{\circ}{\sim}300^{\circ}$ for the crack, and pulse counts were 25% higher in negative polarity than in positive polarity. PD pulses were distributed in every phase unlike to other three electrode systems and the peak magnitude was measured at $118^{\circ}$ and $260^{\circ}$ for the FP. As described above, PD pulses were observed in positive polarity for the POC, in negative one for the POE, in both one for the crack and the FP. In conclusion, it is expected that the identification rate of defect type can be improved by considering the polarity ratio of PD pulses on the PRPDA method.

• Current Optics and Photonics
• /
• v.1 no.2
• /
• pp.107-112
• /
• 2017

An adaptive optics system can be simulated or analyzed to predict its closed-loop performance. However, this type of prediction based on various assumptions can occasionally produce outcomes which are far from actual experience. Thus, every adaptive optics system is desired to be tested in a closed loop on an optical test bench before its application to a telescope. In the close-loop test bench, we need an atmospheric simulator that simulates atmospheric disturbances, mostly in phase, in terms of spatial and temporal behavior. We report the development of an atmospheric turbulence simulator consisting of two point sources, a commercially available deformable mirror with a $12{\times}12$ actuator array, and two random phase plates. The simulator generates an atmospherically distorted single or binary star with varying stellar magnitudes and angular separations. We conduct a simulation of a binary star by optically combining two point sources mounted on independent precision stages. The light intensity of each source (an LED with a pin hole) is adjustable to the corresponding stellar magnitude, while its angular separation is precisely adjusted by moving the corresponding stage. First, the atmospheric phase disturbance at a single instance, i.e., a phase screen, is generated via a computer simulation based on the thin-layer Kolmogorov atmospheric model and its temporal evolution is predicted based on the frozen flow hypothesis. The deformable mirror is then continuously best-fitted to the time-sequenced phase screens based on the least square method. Similarly, we also implement another simulation by rotating two random phase plates which were manufactured to have atmospheric-disturbance-like residual aberrations. This later method is limited in its ability to simulate atmospheric disturbances, but it is easy and inexpensive to implement. With these two methods, individually or in unison, we can simulate typical atmospheric disturbances observed at the Bohyun Observatory in South Korea, which corresponds to an area from 7 to 15 cm with regard to the Fried parameter at a telescope pupil plane of 500 nm.

• Korean Journal of Cleft Lip And Palate
• /
• v.9 no.2
• /
• pp.93-100
• /
• 2006

Although the delayed type of rhinoplasty is currently acceptable in the correction of cleft lip and nasal deformity, Delaire tried to achieve the simultaneous nasolabial reconstruction and muscular rearrangement that affect the subsequent skeletal growth of the face. the anatomic muscular reconstruction can be achieved by making the anchorage of the nasolabial muscles of the cleft side to the nasal septum and muscles on the non-cleft side. Two cleft lip patients of 6 and 7 year-old without any previous operation history were treated with the functional cheilorhinoplasty. One patient with incomplete cleft lip underwent a cheiloplasty along with the rearrangement of orbicularis oris muscle. The other patient had a complete cleft lip and palate with accompanying nasal deformity, who underwent the functional cheilorhinoplasty with the reconstruction of anterior nasal base. All the operation was done under the general anesthesia and patients healed without any significant complications. In the incomplete case, the shapes of Cupid's bow was restored, and the length of columella was regained comparable to the non-affected side. In the complete cleft lip and palate case, the depressed nostril was reconstructed with acceptable symmetry by complete releasing of deformed alar cartilage undermined with a dissecting scissors. In summary, the functional repair of cleft lip and nose could be possible at the same time by using Delaire method. This method is effective to correct the primary nasolabial deformity, which results in the restoring favorable anatomy and its function.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.361-366
• /
• 1997

To determine the physiological, biochemical characteristics and toxicity of hemolysin produced by a novel sucrose positive Vibrio (Vibrio sp. D5) isolated from estuary of Kum river, it was compared with already known sucrose positive Vibrio. Salinity, pH, temperature and conductivity of place where Vibrio sp. D5 was isolated were $4.7\%_{\circ},\;7.6,\;24^{\circ}C$ and $7800{\mu}MHOS$, respectively. Physiological and biochemical characteristics distingiushed Vibrio sp. D5 from other sucrose positive Vibrio: V. alginoipicus, V. cholerae, V. cincinnatiensis, V. fluvialis, V. furnissii and V. metschnikovii. The range of salinity and pH for growth of Vibrio sp. D5 were $0.5\%\~7.5\%$ and $4.5\~9.5$, respectively. Vibrio sp. D5 exhibited typical yellow colony on TCBS agar plate and curved rod type upon transmission electron microscopy (TEM). Vibrio sp. D5 had lethal toxicity against mouse in case of intraperitoneal injection with its culture and showed hemolysin activity on human blood agar and sheep blood agar. Ubrio sp. D5 also demonstrated vascular permeability activity toward rat. From the above results, Vibrio sp. D5 was ascertained to be a novel pathogenic Vibrio.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.398-403
• /
• 2012

Purpose: Mandible resection and discontinuity defect created lead to aesthetic and functional problems. The iliac crest bone graft exhibits relative ease for bone harvesting, possibility of two team approach, ability to close the wound primarily, large amount of corticocancellous bone and relatively few complications. Whereas the use of free vascularized flaps has donor site morbidity and worse-fitting bone contour, the use of nonvascularized iliac bone graft has advantages in the operation time and patients' recovery time. So, nonvascularized iliac bone graft could be an attractive option. Methods: Twenty-one patients (M:F=1:1.1) underwent iliac crest bone harvesting for reconstruction of mandibular discontinuity defect (mean length : $61.6{\pm}17.8$ mm), from May 2005 to October 2011 at the Department of Oral and Maxillofacial Surgery in Kyungpook National University. The average age was $44.1{\pm}16.4$ years and the mean follow up periods was $28.2{\pm}22.7$ months. Bone resorption rate, according to age, sex, primary lesion, location and distance of defect, type of fixation plate, time of graft and pre-operative radiation therapy, were measured in each patient. Results: The mean bone resorption rate was $16.1{\pm}9.0%$. Bone resorption rate was significantly increased in mandibular defect that is over 6 cm in size (P=0.015, P<0.05) and the cases treated pre-operative radiation therapy (P=0.017, P<0.05). All was successfully fixed and maintained for the long-term follow-up. There were a few donor site complications and almost all patients were shown favorable outcome without severe bone resorption in this study. Conclusion: The nonvascularized iliac bone graft seems to be a reasonably reliable treatment option for reconstruction of mandibular discontinuity defects.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.3
• /
• pp.124-127
• /
• 2005

It is demonstrated that the annealing process for Ti in-diffusion to z-cut $LiNbO_3$ at temperature lower than the curie temperature in a platinum (Pt) box can cause a ferroelectric micro-domain inversion at the +z surface and Li out-diffusion, therefore which should be avoided or suppressed for waveguide type periodically poled lithium niobate (PPLN) devices. The depth of the inversion layer depends on the Ti-diffusion conditions such as temperature, atmosphere, the sealing method of $LiNbO_3$ in the Pt box and crystal orientation is experimentally examined. The result shows that the polarization-inverted domain boundary appears at the only +z surface and its thickness is about $1.6{\mu}m$. Also, for the etched $LiNbO_3$, surface the domain shape was observed by the optical microscope and atomic force microscopy (AEM), and distribution of the cation concentrations in the $LiNbO_3$ crystal by the secondary ion mass spectrometry (SIMS).

• Resources Recycling
• /
• v.15 no.6 s.74
• /
• pp.48-55
• /
• 2006

This study was carried out for establishing the physical recycling technique for commercializing process on household batteries. The procedure involves shape separator, crushing, magnetic separation, classification and eddy current separation in sequence. The separation capacity was 400-600 unit cell/hr with shape separation system. The impurities such as manganese and zinc in the magnetic product were below 0.1% respectively, the concentration of iron was above 99% in spent carbon zinc battery. Also non-magnetic products are composed of 22-30% En, 16-22% Mn, 1-3% Fe in the case oi spent zinc carbon battery. The amounts of other components such as carbon rod, plastics and separator were about 37-50%. From the eddy current separation of nonferrous products, the plate-type zinc components were separated up to 96% with 2,250-2,750 meter/min of the conveyor speed.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.566-572
• /
• 2000

Experimental studies were carried out to develop an osmotolerant mutant of Candida magnoliae JH and to determine the optimum concentrations of carbon and nitrogen sources to improve erythritol yield and productivity. Mutants of C. magnoliae JH were prepared by treatment with ethylmethane sulfonate, and osmotolerant mutants were isolated from the agar plate colonies containing 2.5 M KCI. Among the mutants isolated, one mutant M26 was finally selected based on erythritol yield and productivity. In shake flask culture, glucose proved to be the best carbon source and the optimum yeast extract concentration was 5 g/L based on 100 g/L glucose. The erythritol yield and productivity of mutant M26 were greater than wild type in 100 g/L glucose medium. in the fermentation experiments, erythritol production increased with increased glucose concentration, up to a limit of 250 g/L. The maximum concentration of erythritol achieved 127.5 g/L, and the yield and productivity of erythritol production were 51.0% and 0.63 g/L-h, respectively.

• Food Science and Preservation
• /
• v.19 no.3
• /
• pp.328-336
• /
• 2012

The objective of this study was to investigate the storage effects of the packaging method of blanched namul(Gosari, Torandae, Chwinamul and Siraegi). The samples were packaged with three packaging types (Vinyl packaging, sealing packaging and vacuum packaging) and were stored for 10 days at $10^{\circ}C$. The quality characteristics were evaluated via a microbiological test, hardness, pH and flavor patterns analysis. The pH values of the samples were not affected by packaging method. The total aerobic and coliform plate counts were high, in the order of vacuum packaging < sealing packaging < vinyl packaging. Vacuum packaging resulted in the highest hardness value. The flavor patterns of blanched namul by packaging type were analysed with electronic nose system equipped with 12 metal-oxide sensors, and the storage shelf life of namul was evaluated by measuring the change in volatile production. As a result, it was shown that namul in vacuum packaging had few volatile production changes with higher storage time.