• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• KSBB Journal
• /
• 제11권4호
• /
• pp.445-452
• /
• 1996

본 연구에서는 GALl, GALl, GALlO 및 GAP promoter 하류에 reporter 유전자인 K. marxianus의 inulinase 유전자(lNUl)를 연결하여 각각의 재조합 plasmid들을 구축하고, 이들로 형질전환된 S. cerevrswe를 회분배양(YPOG 배지 )하여 외래 유전자 발현에 미치는 promoter의 영향을 비교.검토하 였다. 재조합 효모의 최종 균체농도는 36-39 00600 값을 보여 promoter에 따른 큰 차이를 보이지 않았으나, 포도당 소모기간 동안 비증식속도는 평균 $0.24 h^{-1}$로 유지되다가 galactose 소모기간 동안에 GAL promoter 함유 효모배양의 경우 $0.04-0.06 h^{-1}$, pYIGP 함유 재조합 효모배양은 $0.10 h^{-1}$로 감소하였다. 포도당 고갈 후 inulinase 발현은 시작되었고 균체외 inulinase의 발현 수준은 배양 72시간에 4.3 (GALl promoter), 4.0 (GAL7 promoter), 3.8 (GAL10 promoter) 및 1.6 (GAP promoter) unit/mL에 도달하였다. 평판배지상에서의 활성염색과 회분배양의 결과(최종발현양 및 초기 inulinase 말현속도), inulinase 발현에 미치는 promoter 세기 는 GALl > GALlO > GAL7 > GAP 순임을 알 수 있었다. GAL promoter가 배양말기까지 78 % 이상의 높은 plasmid 안정성을 보인 반면에, GAP promoter의 경우 55%의 낮은 plasmid 안정성을 보였다. 또한, 재조합 inulinase는 promoter 종류에 상관없이 98% 이상 배양액으로 분비되였다.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.219-226
• /
• 2010

스탬핑 프로세서는 고생산성과 낮은 가격으로 인해 자동차 차제나 항공기 부품, 그리고 전자제품 등 다양한 장치에 널리 이용된다. 최근에 에너지 산업과 연관되어 연료전지 분리판, 열교환기 등에 사용되는 주름구조를 가지는 박판의 응용이 급속히 증가되고 있다. 그러나 복잡한 형상 때문에 주름구조물을 한번의 성형으로 만들기가 매우 어렵다. 따라서 본 연구에서는 다단성형공정을 이용하여 성형성을 향상시키는 방법을 제안하였다. 1 차 박판성형 후 열처리를 통하여 가공경화 부분을 제거하고 다시 성형하는 방법으로 복잡하고 실용성이 높은 박판구조물 제작이 가능하도록 하였다. 본 연구에서는 제안한 방법을 검증하기 위하여 판형 열교환기에 응용이 가능한 두께 $100{\mu}m$를 가지는 박판주름구조를 제작하고 공정변수를 연구하였다.

• Composites Research
• /
• 제31권5호
• /
• pp.209-214
• /
• 2018

본 연구에서는 친환경적이고 공급이 안정적인 소재를 찾기 위하여, Bio waste인 쌀겨와 조개 껍질에서 활용하여 마이크로 사이즈의 미세 입자를 추출하고, 추출한 입자의 크기와 형상을 분석한 후 CFRP에 첨가하여 물성의 변화를 관찰하였다. 쌀겨와 탄화 쌀겨의 주요구성성분은 탄소, 산소, 규소로 이루어졌으며 탄화과정을 거치면서 탄소와 규소의 비율이 증가함을 확인하였고, 조개 껍질 분말에서는 탄소 산소와 칼슘이 검출되었으며 이는 조개 껍질의 주요구성물질인 탄산칼슘의 영향으로 보인다. 쌀겨 분말의 면적평균은 $6.19{\mu}m$ 체적평균은 $14.77{\mu}m$으로 FE-SEM을 통하여 막대형상의 입자가 관찰되며 이는 쌀겨가 가지고 있던 껍질부분의 주름이나 표면의 털이 남아있는 형상으로 보인다. 탄화쌀겨의 분말은 면적평균은 $1.55{\mu}m$ 체적평균은 $8.20{\mu}m$ 조개 껍질 분말은 면적평균은 $2.53{\mu}m$ 체적평균은 $5.79{\mu}m$로 분석되었으며 쌀겨분말의 경우 막대(Rod)형상의 입자들이 관찰되었고, 조개 껍질 분말의 경우 판상(Plate)의 형상을 가지는 것으로 관찰되었다. CFRP에 첨가하였을 경우 첨가량에 비례하여 물성의 하락이 관찰되었는데 그 폭이 쌀겨분말의 경우가 가장 컸으며, 조개 껍질 분말의 경우 물성하락을 거의 유발하지 않음을 확인하였다.

• 대한화학회지
• /
• 제48권5호
• /
• pp.504-509
• /
• 2004

구리 금속 분말과 혼합 알칼리금속 다셀레늄화물 용융염 ($KNaSe_x$) 과의 반응을 통하여 판상형태의 결정을 갖는 $KCu_4Se_3$ 화합물을 얻었다. $KCu_4Se_3$화합물의 구조는 X-선 단결정 회절법에의해 결정되었으며 사반면상을 갖는다. (P4/mmm, a=4.013(1)${\AA}$, c=9.712(1)${\AA}$, z=1, R=6.7%). 그 구조는 안티 PbO 구조를 갖는 $Cu_2Se_2$ 층이 겹쳐짐으로서 만들어지는 $[Cu_4Se_3]_n^{n-}$의 이중층으로 구성되어있다. $KCu_4Se_3$의 단결정에 대한 온도 변화에 따른 저항 측정을 통하여 전도체의 특성을 확인하였으며 300 K에서 $1.8{\times}10^{-4}{\Omega}{\cdot}cm$과 20 K에서 $1.0{\times}10^{-6}{\Omega}{\cdot}cm$의 저항 값을 갖는다.

• 한국가금학회지
• /
• 제41권4호
• /
• pp.271-277
• /
• 2014

유화형 소시지 제조 시에 산란 노계육의 첨가량(0, 10, 20, 30%)을 다르게 하여 제조한 소시지를 냉장온도($4{\pm}1^{\circ}C$)에서 7일간 저장한 후, 소시지의 일반성분, pH, TBARS, WHC, 전단력, 가열 감량, 총 미생물수, 육색 및 관능평가를 실시하였다. 시험구는 산란 노계육을 첨가하지 않은 대조구, 산란 노계육을 10% 첨가한 T1, 산란 노계육을 20% 첨가한 T2, 산란 노계육을 30% 첨가한 T3 등 4개 처리구로 나누어 7일간 저장한 후 실험하였다. 일반성분 중 수분, 조단백질 및 조회분 함량은 산란 노계육이 첨가된 소시지에서 유의성이 없으며, 조지방 함량은 산란 노계육의 첨가구에서 특히 T3에서 유의적으로 감소하였다(P<005). 소시지의 이화학적 특성을 나타내는 pH, TBARS 및 총 미생물수는 처리구 간에 유의적인 차이는 없으며, 보수성은 산란 노계육의 첨가구에서 증가하였고, 산란 노계육의 첨가량에 의한 차이는 없었다. 가열 감량은 대조구와 T1, T2 보다 T3에서 유의하게 감소하였다. 산란 노계육이 첨가된 유화형 소시지의 육색은 명도와 황색도에는 영향을 미치지 않았으나, 적색도는 산란 노계육의 첨가량이 증가함에 따라 증가하였다. 훈련된 관능검사요원에 의한 관능검사 결과, 다즙성과 기호성에는 유의성이 없었다. 그러나 경도는 산란 노계육의 첨가량이 많은 T3에서 유의하게 증가하였다. 이상의 결과를 종합적으로 고찰해 보면 유화형 소시지 제조 시 산란 노계육의 첨가는 소시지의 품질 변화 없이 첨가 가능성이 있으리라 생각된다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.3.1-3.1
• /
• 2010

Water splitting reaction using photocatalysts is of great interest in the utilization of solar energy [1]. In the present work, visible light-responsive $TiO_2$ thin films (Vis-$TiO_2$) were prepared by a radio frequency magnetron sputtering (RF-MS) deposition method and applied for the separate evolution of $H_2$ and $O_2$ from water as well as the photofuel cell. Special attentions will be focused on the effect of HF treatment of Vis-$TiO_2$ thin films on their photocatalytic activities. Vis-$TiO_2$ thin films were prepared by an RF-MS method using a calcined $TiO_2$ plate and Ar as the sputtering gas. The Vis-$TiO_2$ thin films were then deposited on the Ti foil substrate with the substrate temperature at 873 K (Vis-$TiO_2$/Ti). Vis-$TiO_2$/Ti thin films were immersed in a 0.045 vol% HF solution at room temperature. The effect of HF treatments on the activity of Vis-$TiO_2$/Ti thin films for the photocatalytic water splitting reaction have been investigated. Vis-$TiO_2$/Ti thin films treated with HF solution (HF-Vis-$TiO_2$/Ti) exhibited remarkable enhancement in the photocatalytic activity for $H_2$ evolution from a methanol aqueous solution as well as in the photoelectrochemical performance under visible light irradiation as compared with the untreated Vis-$TiO_2$/Ti thin films. Moreover, Pt-loaded HF-Vis-$TiO_2$/Ti thin films act as efficient and stable photocatalysts for the separate evolution of $H_2$ and $O_2$ from water under visible light irradiation in the presence of chemical bias. Thus, HF treatment was found to be an effective way to improve the photocatalytic activity of Vis-$TiO_2$/Ti thin films. Furthermore, unique separate type photofuel cell was fabricated using a Vis-$TiO_2$ thin film as an electrode, which can generate electrical power under solar light irradiation by using various kinds of biomass derivatives as fuel. It was found that the introduction of an iodine ($I^-/{I_3}^-$) redox solution at the cathode side enables the development of a highly efficient photofuel cell which can utilize a cost-efficient carbon electrode as an alternative to the Pt cathode.

• 미생물학회지
• /
• 제17권4호
• /
• pp.165-178
• /
• 1979

Phages of Lactobaciilus casei (PLC) isolated from plant drainage were classified and characterized. The results are as follows : 1. On the basis of host range pattern, phages could be divided into 2 groups (PLC-B and PLC-C). PLC-B group phages could be further divided into 5 sub-groups $(B_1, \;B_2, \;B_3, \;B_4, \;and\;B_5)$. Although PLC-C group phages had the same host range, they could be also divided into 2 sub-groups $(C_1\;and\;C_2)$ by morphlogical type. 2. It was $B_3$ group phages that represented a major proportion (44.4%) of phages tested. However, $B_1$ group phages were shown to have the widest host range. 3. Electron micrographs revealed that the phages fell into three different morphological types. $(B_1, \;B_2, \;and\;B_3)$ group phages hd a hexagonal head (52nm in diameter) and a sheathless noncontractile (245 nm in length). $B_4\;and\;C_2$ group phages had a hexagonal head (56 nm) and a short flexible tail (169nm) having no sheath. $B_5\;and\;C_1$ group phages were shown to have a hexagonal head (81 nm) and a contractile tail (140 nm) having a sheath, a base plate and tail fibers. 4. The inactivation of the phages by antisera indicated that serological relationships correlated completely with morphological types. 5. $B_1, \;C_1\;and\;C_2$ group phages produced a large (1, 2 mm in diameter) plaque with a clear ring. The morphology of plaques of $B_3\;and\;B_5$ group phages was the same as those produced by the above, but the average plaque sizes for $B_3\;and\;B_5$ were 0.8 mm abd 0.5 mm, respectively. $B_2\;and\;B_4$ group phages produced a small (0.5 mm) turbid plaque with an irregular edge. 6. The latent period and the average burst size of $B_1\;and\;B_3$ group phages were 90 min and 100, respectively. These phages reuqired calcium ions for their miltiplication. 7. $B_3$ group phages could not be absrobed to R-variant $KC_1$. 8. The order of resistance of phages to heat was $B_2\;>\;B_1, B_4\;and\;B_5\;>\;B_3\;and\;C_2, \;B_5$ group phages were more stable than $B_3$ in various pH values. $C_2$ group phages were more sensitive to UV irradiation than $B_1\;and\;B_3$ group phages. 9. Strains YIT9018 and IAM 1043 were induced by mitomycin C treatment. Phage particles detected in the lysates had a hexagonal head (38 and 49 nm, respectively), but no tail. Any sensitive indicator strain could not be isolated in spite of repaeated trials.

• 한국발생생물학회지:발생과생식
• /
• 제13권4호
• /
• pp.291-296
• /
• 2009

멍게 유생의 뇌포에는 2개의 감각색소세포인 평형기와 안점 이외에 또 다른 감각세포로 추정되는 수압수용체세포가 존재한다. 수압수용체세포 형성에 관해서는 현재까지 거의 알려진 것이 없다. 본 연구에서는 수압수용체세포 형성에서 FGF 신호전달 과정의 관련성을 조사했다. 수정란에 Hr-FGF9/16/20 antisense MO를 미세주입했을 때, 발생한 유생에서 수압수용체세포 특이적 Hpr-1 항원의 발현이 검출되지 않았다. 32세포기부터 FGF 수용체 억제제 SU5402 및 MEK 억제제 U0126을 처리한 배아도 수압수용체세포를 갖지 못한 유생으로 발생했다. 다음으로 수압수용체세포 형성에 FGF 신호전달 과정이 관련되는 시기를 자세히 조사했다. 수압수용체세포 형성에는 FGF 수용체 활성이 16세포기부터 64세포기까지 필요하다는 것이 시사되었다. U0126은 8세포기부터 후기 낭배기까지 Hpr-1 항원 발현을 억제했다. Hpr-1 항원 발현은 신경판기 직전부터 U0126의 영향을 받지 않았다. 따라서, 멍게에서 수압수용체세포 형성은 1차 신경유도기부터 후기 낭배기까지 FGF 신호전달 과정을 필요로 한다는 것이 밝혀졌다.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2006년도 추계학술대회
• /
• pp.65-74
• /
• 2006

Modem drug discovery requires rapid pharmacokinetic evaluation of chemically diverse compounds for early candidate selection. This demands the development of analytical methods that offer high-throughput of samples. Naturally, liquid chromatography / tandem mass spectrometry (LC-MS/MS) is choice of the analytical method because of its superior sensitivity and selectivity. As a result of the short analysis time(typically 3-5min) by LC-MS/MS, sample preparation has become the rate- determining step in the whole analytical cycle. Consequently tremendous efforts are being made to speed up and automate this step. In a typical automated 96-well SPE(solid-phase extraction) procedure, plasma samples are transferred to the 96-well SPE plate, internal standard and aqueous buffer solutions are added and then vacuum is applied using the robotic liquid handling system. It takes only 20-90 min to process 96 samples by automated SPE and the analyst is physically occupied for only approximately 10 min. Recently, the ultra-high flow rate liquid chromatography (turbulent-flow chromatography)has sparked a huge interest for rapid and direct quantitation of drugs in plasma. There is no sample preparation except for sample aliquotting, internal standard addition and centrifugation. This type of analysis is achieved by using a small diameter column with a large particle size(30-5O ${\mu}$m) and a high flow rate, typically between 3-5 ml/min. Silica-based monolithic HPLC columns contain a novel chromatographic support in which the traditional particulate packing has been replaced with a single, continuous network (monolith) of pcrous silica. The main advantage of such a network is decreased backpressure due to macropores (2 ${\mu}$m) throughout the network. This allows high flow rates, and hence fast analyses that are unattainable with traditional particulate columns. The reduction of particle diameter in HPLC results in increased column efficiency. use of small particles (<2 urn), however, requires p.essu.es beyond the traditional 6,000 psi of conventional pumping devices. Instrumental development in recent years has resulted in pumping devices capable of handling the requirements of columns packed with small particles. The staggered parallel HPLC system consists of four fully independent binary HPLC pumps, a modified auto sampler, and a series of switching and selector valves all controlled by a single computer program. The system improves sample throughput without sacrificing chromatographic separation or data quality. Sample throughput can be increased nearly four-fold without requiring significant changes in current analytical procedures. The process of Bioanalytical Method Validation is required by the FDA to assess and verify the performance of a chronlatographic method prior to its application in sample analysis. The validation should address the selectivity, linearity, accuracy, precision and stability of the method. This presentation will provide all overview of the work required to accomplish a full validation and show how a chromatographic method is suitable for toxirokinetic sample analysis. A liquid chromatography/tandem mass spectrometry (LC-MS/MS) method developed to quantitate drug levels in dog plasma will be used as an example of tile process.