• Journal of Korean Society of Forest Science
• /
• v.82 no.1
• /
• pp.7-11
• /
• 1993

The swollen tissue of wound origin formed after nailing ㄷ-shaped fastener to a stem of Platanus occidentalis L. was compared with normal tissue in the qualitative and quantitative anatomical aspects. The swollen tissue appeared to differ from normal tissue in irregular cell orientation, occurrence of tyloses in vessel element, less common appearance of pore multiples, narrower and shorter vessel element, lower vessel frequency, shorter and highly thick-walled wood fiber, greater number of bars per scalariform perforation plate in vessel element, larger ray frequency, larger ray width and lower ray height.

• Korean Journal of Plant Resources
• /
• v.25 no.3
• /
• pp.308-316
• /
• 2012

The purpose of this study was to identify the variant of Platanus occidentalis, whose bark looks white, also can be classified as P. occidentalis and to examine its genetic difference from the general P. occidentalis. For the variant identification of P. occidentalis, SNP and ISSR analysis were used in this study. Thirteen samples of P. occidentalis white variant were collected in Cheongju and 24 samples of normal P. occidentalis obtained in Cheongju, Pyongtaek, Ansan, Suwon, Osan and Jincheon area. ITS 1 and ITS 2 sequences of white variants were identical with those of P. occidentalis. We could not find any sequence difference between normal and white P. occidentalis. So we concluded that the white variant belongs to normal P. occidentalis even their bark is white and peeled easily. By ISSR test, 98 amplicons were acquired using 10 primers. P. occidentalis and white P. occidentalis showed different band patterns from the UBC #834. According to the result of Nei (1979)'s genetic distance analysis, the members of white P. occidentalis were grouped more tightly than the members of normal P. occidentalis. The UPGMA dendrogram shows that the variant and P. occidentalis divided widely into two groups. These results show that the phenotype of P. occidentalis white variant is caused by genetic factors rather than by environmental factors.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.26-40
• /
• 1990

The plane trees(Platanus occidentalis L.) have been grown in Korea very widely as ornamental garden or street trees but they have not been used as manufacturing materials The proportion of imported wood has been now over 85% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. From a this point of view, this study was carried out to investigate solid wood bending properties of plane trees and then to develop their end-uses, and the size of specimens tested was $15\times15\times350mm$ for steaming treatment and they were dried to $15\pm1%$ before bending. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Platanus occidentalis are showed in Table 7. 2. The minimum solid-bending radii of Platanus occidentalis were 40mm in steaming treatment. 3. The effect of knots, diagonal grain and decay on the degradation of bending processing properties were very severe. 4. The bending stress was setted successfully through $80^{\circ}C$-15hrs drying after bending and the spring back for 24hr-exposing time was only about 1%.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.2
• /
• pp.8-15
• /
• 1990

This study was carried out to investigate the wood qualities for the end-use development of sycamore (Platanus occidentalis L.) grown in Korea. The results obtained were as follows: 1. The average length of wood fibers was l.56mm and the average width of annual rings was 9.5mm. It had very fast growth rate. 2. The specific gravity in air-dry was 0.66. The shrinkage and water absorption were relatively large. The shear and impact strengthes were very strong, while the compressive, tensile, and bending strengthes were weak in comparison to it's specific gravity. 3. The contents of ash, holocellulose, lignin were relatively high 0.74%, 83.08%, 28.79%, but that of pentosan was low 18.53%. 4. The expected uses of sycamore wood are plywood. fancy veneer, small furniture, musical instrument, door and window frame, tool handels, boxes, etc.

• The Korean Journal of Mycology
• /
• v.44 no.1
• /
• pp.64-67
• /
• 2016

During screening fungi as potential biological control agents for plant parasitic fungi, a fungal strain, EML-FAM3, was isolated from powdery mildew leaf lesions caused by Erysiphe platani on sycamore (Platanus occidentalis L.), and another strain, EML-FAMC1, from Erysiphe australiana on crape myrtle (Lagerstroemia indica L.). Based on the morphological characteristics and phylogenetic analysis of the internal transcribed spacers (ITS1 and ITS2) and 5.8S rDNA, the strains were identified as Ampelomyces quisqualis. To our knowledge, this is the first report of new mycohosts, E. platani and E. australiana, of the mycoparasite A. quisqualis on sycamore and crape myrtle plants. The hyperparasite may represent the potential for controlling E. platani and E. australiana epidemics.

• Journal of Korean Society of Forest Science
• /
• v.40 no.1
• /
• pp.57-62
• /
• 1978

This study was carried out to determine the proper transplanting time of Platanus occidentalis L. (plane tree, sycamore) with 5 to 6 cm and 25 to 30 cm in diameter of breast height at the forest nursery of Chonnam National University in 1977. For that purpose, the experiment of the time of transplantation, and the moisture content and soluble sugar were analysed. The results are as follows: 1. Both its rooting and growth were slightly different in the period of January to early April (before bud-break), but remarkably declined after its bud-break (mid-April to May). 2. And also, its moisture content and soluble sugar were slightly different (January to early April), but, on the other hand, considerably increased in the content of moisture and sharply decreased in soluble sugar after bud-break (mid-April to May). 3. In comparision with healthy trees, rooting and growth of trees infected with Cankers were unusually retarded and its moisture content and soluble sugar were much less. 4. The proper time to plant sycamore was recognized to be the period of November to March, since the higher amounts of soluble sugar and the lesser amounts of moisture in that period. 5. The sudden exposure to the sun of the boles of diseased and wounded trees could be in death in case of sun-scald on the side of south-west. 6. Pruning wounds should be treated with an antiseptic, as soon as they are made, to prevent entrance of decay or disease while the wound is healing. 7. The wound and sun-scald can be presented by covering the trunk with straw ropes before transplantations.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.508-515
• /
• 2008

Sycamore (Platanus occidentalis L.) seedlings were grown under low light intensity and ozone treatments to investigate the role of the light environment in their response to chronic ozone stress. One-year-old seedlings of Platanus occidentalis L. were grown in pots for 3 weeks under low light (OL, $150{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and high light (OH, $300{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) irradiance in combination with 150 ppb of ozone fumigation. After three weeks of ozone and light treatment, seedlings were placed in ozone free clean chamber for 3 weeks for recovery from ozone stress with same light conditions to compare recovery capacity. Ozone fumigation determined an impairment of the photosynthetic process. Reduction of leaf dry weight (14%) and shoo/root ratio (17%) were observed in OH treatment. OL treatment also showed severe reductions in leaf dry weight and shoot/root ratio by 48% and 36% comparing to control, respectively. At the recovery phase, OH-treated plants recovered their biomass, whereas OL-treated plant showed reduction in leaf dry weight (52%) and shoot/root ratio (49%). OH-treated plants reached similar relative growth rate (RGR) comparing to control, whereas OL-treated plants showed lower RGR in stem height. However, there were no significant differences in response to those treatments in stem diameter RGR at the recovery phase. Ozone treatment produced significant reduction of net photosynthesis in both high and low light treatments. Carboxylation efficiency and apparent quantum yield in OL-treated plants showed significant reductions rate to 10% and 45%, respectively. At the recovery stage, ozone exposed seedlings under high light had similar photosynthetic capacity comparing to control plants. Antioxidant enzymes activities such as superoxide dismutase (SOD), ascorbate peroxidase (APX), and glutathione reductase (GR) were increased in ozone fumigated plants only under low light. The present work shows that the physiological changes occur in photosynthesis-related parameters and growth due to ozone and low light stress. Thus, low light seems to enhance the detrimental effects of ozone on growth, photosynthesis, and antioxidant enzyme responses.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.2
• /
• pp.118-123
• /
• 2003

This study was carried out to examine the heavy metal concentrations in soils under roadside trees and tree ring layers, and to investigate the relationship between heavy metal concentrations and tree ring growth of roadside trees in Seoul. Soil samples at $0{\sim}20\;cm$ depth and tree line were collected from Platanus occidentalis and Ginkgo biloba at nine streets, and pH and heavy Metal concentrations were analyzed. Soil pH ranged from 6.62 to 8.01 and soil heavy metal concentrations under roadside trees were higher (Zn 109.03, Pb 26.49 and Cu 44.98 mg/kg) compared with those of the referred forest soils. Soils at Cheonggye2ga street showed the highest heavy metal concentrations, and seemed to be related to heavy traffic and dense hardware stores. Tree ring width significantly decreased from 1979 through 2000 for both species. There were positive correlations between Cr, Pb and Cu concentrations in soils and tree ring layers for P. occidentalis and Ni for G. biloba. However, there were negative correlations between Cr concentration in tree ring layers and tree ring width for P. occidentalis, and Ni and Cu for G. biloba. Also there were no significant correlations between climatic factors in Seoul and tree ring width.

• Journal of the Korean Wood Science and Technology
• /
• v.14 no.2
• /
• pp.3-12
• /
• 1986

The aim of this study is to determine the flexural properties(Modulus of Rupture, Modulus of Elasticity) of Platanus occidentalis L. laminated beams fabricated with 1, 3, 5, 8, 15 lamination and Tension, Compression lamination. The results were as follows: 1. MOR increased with increasing number of lamination in 3, 5, 8, 15-beam and Tension lamination beam. MOR of Compression lamination beam was lower than that of 3-beam, MOR of vertical beam not having Tension or compression lamination was lower than that of horizontal beam, but MOR of vertical beam with tension or compression lamination was same or slightly higher than that of horizontal beam. 2. The allowable working stress showed the same tendency. This stress increased with increasing number of lamination. This value of Tension lamination beam was higher than that of compression lamination beam. 3. MOE of all laminated beams was higher than that of solid beam and Tension lamination beam was higher than that of 3-beam. MOE of Tension lamination beam was higher than that of Compression lamination beam. MOE of all vertical beam was higher than that of horizontal beam except for T-2, T-5, C-3. 4. Most beam failures appeared to begin in tension. These tension failures were classified into Splintering tension, Cross-grained tension, Simple tension, Brittle tension. All test beam failures could be classified into three categories. 1) Tension failure 2) Compression failure 3) Horizontal shear failure.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.15-21
• /
• 2003

Image processing technique was adapted for exploring the more convenient ways to investigate the drying characteristics of wood. The acquisition of information about drying characteristics is indispensable for the development or improvement of dry-kiln schedules. A small internal fan type wood dry kiln was combined with image-processing and data-acquisition systems to monitor continuously the formation of checks and moisture reduction during drying. All the images and data were analyzed to improve or estimate the dry-kiln schedules and predict the drying time which would be required to dry green wood to 10% moisture content in internal fan type kiln. Samples of 20 mm- and 50 mm-thick Metasequoia glyptostrobodies, Paulownia coreana Uyeki, Pinus densiflora Sieb. Et Zucc., Platanus occidentalis L., Quercus acutissima and Robinia pseudo-acacia were used to verify the potentiality of this technique.