• 자원리싸이클링
• /
• 제13권1호
• /
• pp.39-46
• /
• 2004

마찰대전을 이용한 정전분리는 서로 상이한 물질간의 마찰을 통해 서로 다른 극성으로 하전시켜 이를 전기장내에 통과시켜 분리하는 기술이며, 플라스틱과 같은 부도체입자들의 정전분리에 많이 사용된다. 본 연구에서는 연속식 드럼형 마찰대전장치를 개발하고 이를 폐건축 및 폐가전 플라스틱의분리에 적용시켰다 분리대상 플라스틱은 폐건축 자재의 경우 PE/PVC 혼합시료를 대상으로 하였으며, 폐가전의 경우 ABS/PS/PP의 혼합시료를 대상으로 하였다. 건축자재 혼합플라스틱 및 가전제품 혼합플라스틱 모두 드럼형 마찰대전장치를 이용할 경우 실험한 조건에서 무게기준으로 95%이상의 순도조건에서 95%이상의 회수율을 보였다.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.148-154
• /
• 2010

It is necessary to develop new methods to prevent catastrophic failure of structural material in order to avoid accidents and conserve natural and energy resources. Design of intelligent materials with a self-diagnosing function to prevent fatal fracture of structural materials was achieved by smart composites consisting of carbon fiber tows or carbon powders with a small value of ultimate elongation and glass fiber tows with a large value of ultimate elongation. The changes in electrical resistance of CF-GFRP/GFRP (carbon fiber and glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased abruptly with increasing strain, and a tremendous change was seen at the transition point where carbon fiber tows were broken. Therefore, the composites were not to monitor damage from the early stage. On the other hand, the change in electrical resistance of CP-GFRP/GFRP (carbon powder dispersed in glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased almost linearly in proportion to strain. CP-GFRP/GFRP composites are superior to CF-GFRP/GFRP composites in terms of their capability to monitor damage by measuring change in electrical resistance from the early stage of damage. However, the former was inferior to the latter as an application because of the difficulties of mass production and high cost. A method based on monitoring damage by measuring changes in the electrical resistance of structural materials is promising for improved reliability of the material.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.697-702
• /
• 2002

Composite material made of recycling paper and plastics was developed. The tension and bending testing result of developed composite material shows that the cellulose contained in paper contributes much to get high flexural rigidity. As an application example, the raised access floor for office automation purpose was developed by making use of developed composite material. Manufacturing process together with the extrusion die and the compression die for to manufacture the access floor have been developed.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2001년도 공동학술대회
• /
• pp.242-247
• /
• 2001

Foam Plastics, cellular plastics, expanded plastics, plastic foam 등 여러 가지 이름으로 불리우고 있는 발포플라스틱은 plastic matrix 내에 무수한 cell이 open 형태 혹은 closed 형태로 존재하는 플라스틱 재료이며/sup 1)/ 원료플라스틱 보다 경량성, 열전도성, 충격흡수성 등 제반물성이 우수하여 포장재료, 보온재, 완충재 및 각종 구조재료로써 널리 사용되고 있으며 소재 plastic의 특성에 따라 PE, PP, PVC, PS, ABS 등 다양하게 개발되어 있다.(중략)

• 소성∙가공
• /
• 제11권8호
• /
• pp.651-667
• /
• 2002

Overview of plastics processing is described and the research trend of the processing is also noted. The main manufacturing processes in the plastics industry are injection molding, blow molding, compression molding, transfer molding, extrusion and thermoforming. The principles of those processes have been discussed and molds for shaping operation have been mentioned. References for each process have also been presented.

• 동아시아식생활학회지
• /
• 제20권4호
• /
• pp.628-638
• /
• 2010

This study examined the current status of caution labels on cooking utensils made from plastics or glass, toward suggesting improvements in labeling for consumer's safe use. Distributors were categorized into four types, plastic kitchen utensils were categorized into seven types according to usage, and glass kitchen utensils were categorized into two types. Generally, the percentage of cooking utensils made from plastics or glass that have caution labels were not high. For the types of labels on cooking utensils made from plastic and glass, stickers were the most frequently used, and of these, a high percentage scored "fair" in label perception. On the basis of these results, regulations are needed to strengthen caution labels for kitchen utensils.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.263-268
• /
• 2001

MCPs means Micro Cellular Plastics. The micro-cells are generated in the products by the difference of dissolution through the pressure drop after super critical fluid of CO2 or N2 dissolves into polymer. We have developed injection molding process adopting MCPs and applied it to a broad range of injection molded thermoplastic materials and applications. It can prevent the leakage of impact strength and increase the thermal conductivity, moreover regulate the thermal conductivity. Then we can develop the high strength foaming plastics. Also, it can be gained a competitive advantage by utilizing its processing benefits, e.g. the lightweight products and significant reductions in material consumption.

• 한국포장학회지
• /
• 제26권1호
• /
• pp.25-31
• /
• 2020

Recently, applications of biomass-based plastics have increased according to the eco-friendly policy of the reduction of carbon dioxide emissions in domestic and foreign government. In this study, a paper plastic composite was produced by compounding polypropylene and micronized paper powder that was prepared using dry pulverization technology. Subsequently, the specimen of paper plastic was verified with mechanical properties, formability and product safety test to confirm the suitable packaging materials for food packaging. Paper plastics showed slightly lower mechanical properties than currently commercialized PP composites. However, paper plastics are valuable materials as environmentally friendly carbon-reducing material because of high biocarbon content, light weight features and applicability of existing manufacturing machines or system.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.155-160
• /
• 2001

In the use of glass fiber reinforced plastics(GFRP) it is often necessary to cut the components, but the cutting of GFRP is often made difficult by the delamination of the compositions and short tool life. Experimental investigation was conducted to evaluate the chip formation of the glass fiber reinforced plastics during orthogonal cutting. The chip formation process, cutting force, and thrust force were studied. The chip formation processes were studied through the use of quick-stop device. Chip-tool contact areas were obtained with the use of the quick-stop device, and observed using optical microscopy after polishing. Cutting force and thrust force were measured through the use of the tool dynamometer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.186.1-186.1
• /
• 2011

Most of waste plastics including waste vinyls have been recycled up to about 50% of waste production, 4.5 million ton per year in 2009. To fundamentally increase the recycled amounts of waste plastics to waste production, the energy utilization of waste plastics is inevitable. But the contents of PVC included in waste plastics can limit the use as a RPF and make the air pollutants such as HCl and dioxin when it burns in the combustion system. Accordingly the source dechlorination by using heating method can be applied to make low contents of HCl as less than 0.6%. In this study the twin screw reactor using heat medium was used for the source dechlorination. As results of study, it was considered that this system is effective for the industrilal application.